* fix restart behaviour after successful connection
* fix labeling of faulty stations
* optimize re-connect behaviour at locations where multiple uplinks with
the same SSID are in range
* use procd pidfile handling
* refine logging
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer rename faulty uplinks in /etc/config/wireless, but save
uplink state in json runtime information. To reset the saved state
simply restart travelmate processing.
Signed-off-by: Dirk Brenken <dev@brenken.org>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* checks continuously the signal quality for conditional
uplink (dis-) connections
* captive portal detection with internet online check and
a 'heartbeat' function to keep the uplink connection up & running
Signed-off-by: Dirk Brenken <dev@brenken.org>
* corner case fix with multiple (partly disabled) radios
* LuCI: BSSID will be ignored by default in 'wireless add' dialog
* LuCI: Textarea 'autoscroll down' in logfile view
* LuCI: refine logfile search term
Signed-off-by: Dirk Brenken <dev@brenken.org>
* limit sta interface selection/handling
to defined travelmate interface (trm_iface) only
* check eap capabilities and ignore enterprise uplinks
as long as eap support is not available
* documentation update
* cosmetics
* LuCI: various cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
* backend/frontend: supports a Connection Limit ('trm_maxretry')
of '0', to disable this feature (unlimited retries)
Signed-off-by: Dirk Brenken <dev@brenken.org>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
backend:
* handle errors due to misconfigured uplinks
* various bugfixes
luci frontend:
* add a powerful wireless station manager to edit and delete existing
interfaces or scan for new uplinks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* wait for hostapd comes up during boot
* remove needless ubus call during script startup
* remove needless iwinfo check (covered by package dependency)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* always update the connection status, even in case of an error
* merge multiple ubus network calls in central check routine
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer misuse ubus/procd service object for travelmate runtime
information, now save all required information directly
in a JSON file/format
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested & slow modem/router setups, set 'trm_triggerdelay' accordingly
* change start priority & refine reload timings
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* rework automatic mode (active scan/re-connection handling):
* much more procd & resource friendly
* now enabled by default
* save runtime information in ubus service (data section)
* final backend preparation for new LuCI-GUI (still WIP!)
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
For consistency, use full name instead of $(PKG_NAME) in define and eval
lines for all packages.
I've seen reviews that asked to do this before, and I am asking the same
during reviews now. To avoid this in the future, fix this treewide so
when people use existing packages as example, we will not have to
request this change anymore.
This makes all packages consistent with both LEDE and OpenWrt base
repositories.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* optimized connection handling -
removed needless timeouts & wireless commits
* set the pre-configured reload timeout to
a more conservative/realistic value of 30 seconds
* further logging tweaks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add an "active mode", where travelmate will be restarted
every n seconds (default 60) and checks existing uplink connection
regardless of ifdown event trigger (disabled by default)
* enhance multiple radio support
* fix the ap detection
* respect different radios during scanning & connection handling
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add 'enabled' check in init script
* support multiple radios (see online doc)
* fix race condition in ap check
Signed-off-by: Dirk Brenken <dev@brenken.org>
* switch to procd interface trigger
* no additional active monitor/polling in the background
* simplified code
* new option "trm_maxwait", how long (in seconds)
should travelmate wait for wlan interface reload action
(default: '20')
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* change option 'trm_iw' to boolean,
1 => use iw (default)
0 => use iwinfo
* option 'trm_maxretry' now accepts '0' to disable this check at all
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken
Stijn Tintel