The underlying `acme.sh` allows custom ACME server URLs (using `--server`). Adding the necessary field to specify a custom ACME server URL from UCI.
Signed-off-by: Jannis Pinter <jannis+openwrt@pinterjann.is>
Use "mwan3 use" to wrap a command with interface bindings so that you can
avoid the mwan3 rules and test behavior on a specific interface.
eg "mwan3 use wan ping -c1 1.1.1.1"
Additional binding arguments to the command will have their system
calls intercepted and ignored.
eg "mwan3 use wan ping -c1 -I tun0 1.1.1.1" will use the
device associated with "wan", rather than "tun0".
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Rather than using a special mwan3 user to manage mwan3track's tracking
packets, this commit implements a small helper library to bind to
device and to set a fwmark so that the tracking packets can be routed
out of the correct interface.
This provides a consistent method for binding to a device rather than
relying on various packages potentially buggy implementations. For
example: #8139 and #12836
This helper issue also allows for more tracking methods to be added
even if they do not have a command line option to bind to device,
such as iperf3 (eg #13050).
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
start all mwan3mon and mwan3track instances on mwan3 start
if an interface is down when mwan3track starts, it waits
for a signal from the hotplug script to start
procd can then handle stopping all of the scripts when mwan3
is halted
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
correctly terminate interface status checks with new lines so that
interface status does not get confused when one interface is a prefix
of another interface.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
handle creation of routing tables in mwan3rtmon to avoid race
conditions and potentially missing routes
handle ipv6 routes that have expiry
update directly connected ipset when routes are added or deleted
add fall through rules so that the default routing table is not
used if no rule in the interface-specific routing table matches
add option to comply with mwan3 source based routing
get default route parameters from main routing table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Remove paxctl stuff. pax is not packaged in OpenWrt.
Add reload support.
Install lua cfg file as 644. It's needed to be readable as prosody user
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Change KEY/HMAC_KEY to __CHANGEME__, which is rejected by fwknopd
during start-up. The value CHANGEME is used only by LuCI package
luci-app-fwknopd - pull request for generating keys directly from
LuCI has been created already.
* Add sensible defaults for ENABLE_IPT_FORWARDING and ENABLE_NAT_DNS,
which both are/were set by luci-app-fwknopd. Move the defaults here.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
The substring "release_" does not reflect the version number.
In addition, package names will be shorter.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
mbedcrypto should be searched, not mbedtls. Also, there is no pkgconfig
file with mbedtls. Fixed that as well. Removed Makefile hacks.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
No functional changes, just moved the sources into out of tree
project[1] so it's going to be easier to do CI with unit testing,
fuzzing etc.
1. https://git.openwrt.org/?p=project/cgi-io.git;a=shortlog
Signed-off-by: Petr Štetiar <ynezz@true.cz>
AdGuardHome is a network-wide ads and trackers blocking DNS server.
After installing it with opkg, start it like every service:
/etc/init.d/adguardhome start
In order to complete the installation vist http://{YOUR_ROUTERS_IP}:3000.
Then you can setup dnsmasq to forward DNS traffic to AdGuardHome:
uci -q delete dhcp.@dnsmasq[0].server
uci add_list dhcp.@dnsmasq[0].server=127.0.0.1#{PORT_SET_DURING_INSTALL}
uci set dhcp.@dnsmasq[0].noresolv=1
uci commit dhcp
/etc/init.d/dnsmasq restart
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
If lighttpd loads mod-auth, it also automatically tries to load
mod-authn_file, and fails if it's not available. That is a compatibility
feature of lighttpd after the funtionality was split into modules.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
* fix a vpn/iptables race condition
* remove needless dnsmasq dependency
* synchronize code-base of all auto-login scripts, due to
COVID-19 restrictions all of them are still untested/WIP
* various small cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
Jannis Pinter
James White
Aaron Goodman
Rosen Penev
Oldřich Jedlička
Nicholas Smith
Jan Pavlinec
Alexey Dobrovolsky
Pavel Demkovich
Jeffery To
Florian Eckert
David Bauer
Olivier Poitrey
Chao Liu
Petr Štetiar
Matthias Schiffer
Stan Grishin
Miroslav Lichvar
Marcin Jurkowski
Dobroslaw Kijowski
Jan Kardell
Josef Schlehofer
Johnathan Arsenault
Darryl Sokoloski
Yuan Tao
Dirk Brenken