Seems it was not failing for me because it was probably
using my host Python, which may have the `six` package
available.
This patch enforces the use of the packaged Python.
That way, it's more consistent that the python-six
package is available.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The most important change is local redirects being disabled by default.
There is an option called cgi.local-redir that allows enabling this
optimization manually back if needed.
Local redirects were initially introduced in 1.4.40 but caused many
problems for *some* web services.
One of problems is breaking Post/Redirect/Get design pattern. With
redirects handled on server side there is no browser redirection making
it "lose" the POST data.
Another possible issue are HTML forms with action="". With CGI local
redirects browser may be sending form data to the wrong URL (the one
that was supposed to redirect the browser).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
From upstream's changelog:
* main: annotate init/exit functions to save memory
* selftest: remove antique siphash self test
* haskell: re-add updated haskell example
* socket: use ip_rt_put instead of dst_release
* device: avoid double icmp send on routing loop
* compat: clean up cruft
* global: cleanup IP header checking
* compat: do not export symbols unnecessarily
Various cleanups and updates.
* device: netdevice destruction logic change for 4.12
When Linux 4.12 is released next week, we're good to go.
* device: only use one sleep notifier
Rather than have a separate sleep notification for every interface, we now
have a single notifier for every interface. This improves performance,
especially when creating many interfaces at once.
* device: remove icmp conntrack hacks
We're moving hacks upstream the proper way, and then backporting them to
compat.
* receive: extend rate limiting to 1 second after under load detection
After we determine that we're under load, we now wait 1 second before not
being under load again, a timer which is global across all interfaces on a
given system.
* curve25519: satisfy sparse and use short types
* curve25519: keep certain sandy2x functions in C
Certain functions have been made into C, which should improve stack frames and
reliability.
* ratelimiter: rewrite from scratch
This is a big change. We no longer rely on x_tables or xt_hashlimit, instead
using a super minimal and sleek token bucket ratelimiter. This works much
better than the old cruft and should allow us to run more places. It also has
the benefit of being global, so that it's possible to have thousands of
interfaces without killing the system with separate GCs and vmallocs, which is
what happened prior.
* socket: verify saddr belongs to interface
We now more quickly react to changes of the v4 routing table, by ensuring that
the sticky source address is actually still valid.
* wg-quick: properly match IPv6 endpoint
wg-quick now works better with IPv6.
* wg-quick: use printf -v instead of namerefs for bash 4.2
This adds support for old bash, which means wg-quick should be generically
"bash 4 and up". I'm not happy about this but EL7 uses old bash, so we're
stuck with it.
* compat: support EL7.3
Support for RHEL, CentOS, ScientificLinux, and so forth.
* compat: support Ubuntu 14.04
An old crufty Ubuntu is now supported, since it's LTS.
* add bind support (see readme)
* export all blocked domains in one central file (adb_list.overall)
* prerequisite for proper bind support
* much faster sort operation with less memory consumption
* backups are still handled per source separately,
to be more flexible in adding/removing block list sources
* add additional 'wan6' interface trigger in default configuration
* various small fixes & optimizations
Signed-off-by: Dirk Brenken <dev@brenken.org>
If more then one interface get up/down at once mwan3 could be in a
undefined state, because more then one mwan3 hotplug script are running
and editing the iptables.
Lock the critical section should solve this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
A lot of autoconf-based scripts expect --with-foo-dir=$(STAGING_DIR)/usr
and break if they can't find bin/foo-config as a child of that path.
Putting things in $(STAGING_DIR)/host/bin seems to be suboptimal; I
could change the install path but there's no saying what that would
break.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
With this patch the unbound init routines manage resolv.conf if and only if
when unbound will listen on 127.0.0.1#53 and dnsmasq is not.
Also logs some cases where config values are overriden with sane defaults.
Fixes (partially) LEDE FS#785
Fixesopenwrt/packages#4487
Signed-off-by: Paul Oranje <por@xs4all.nl>
luci2-io-helper: bugfix buckup script read timeout
Reading files from stdin will block for ever. The uhttpd is killing the
backup process after script_timeout.
Switching read to non blocking mode and add a waitpid for the slave
process does not end in a script_timeout anymore.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Add config support which allow snmpd to take a more active role by sending
traps.
Following config options are supported which map directly on snmpd directives:
-trapcommunity
-trapsink
-trap2sink
-informsink
-authtrapenable
-v1trapaddress
-trapsess
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
- use exec directly to eliminate a level in the process tree
- use "$@" instead of "$*" to pass arguments to openconnect
According to openconnect(8), openconnect will call vpnc-script to
cleanup before quit when it received SIGINT(2) and will quit immediately
when it received SIGTERM (the default signal by kill command)
Before and after the change, openconnect process will be killed first
with SIGINT sent from netifd. This was decided by the
'proto_kill_command "$config" 2' notify call in the proto script.
SIGKILL is the only other signal that can be sent from netifd when the
process did not quit on SIGINT on time. There should be no need to trap
on signal 1 3 6 9 (HUP QUIT ABRT KILL)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fixes build errors with external toolchains:
[ 33%] Building C object CMakeFiles/cgi-io.dir/main.c.o
/home/florian/dev/openwrt/trunk/build_dir/target-mipsel-unknown-linux-gnu_glibc/cgi-io/main.c:30:21:
fatal error: libubus.h: No such file or directory
#include <libubus.h>
^
compilation terminated.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
According to openconnect --help output:
-m, --mtu=MTU Request MTU from server
--base-mtu=MTU Indicate path MTU to/from server
Fixes#2099 by allowing setting tunnel mtu
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
It was introduced with 41f8d5465 ("openconnect: fix a couple of minor
things and add an interface option") and not needed since 4083de9d7
("openconnect: use proto_add_host_dependency")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
We would not be able to search for pcap.h because CFLAGS are not passed
from src/Makefile down to src/wps/Makefile:
make[4]: Entering directory
'/home/florian/dev/openwrt/trunk/build_dir/target-mipsel-unknown-linux-gnu_glibc/reaver-1.4/src/wps'
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_build.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_parse.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_process.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_common.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_dev_attr.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_enrollee.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_registrar.c -c
In file included from ../misc.h:41:0,
from wps_registrar.c:27:
../defs.h:43:18: fatal error: pcap.h: No such file or directory
#include <pcap.h>
^
compilation terminated.
Makefile:28: recipe for target 'wps_registrar.o' failed
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There are no other "echo" debug lines in this file, and it seems
clear that this one was accidentally left as a debugging line,
since it misspelled "dependency". So, we just remove this line.
We don't bump the package version, though, because this is
pretty inconsequential.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
From upstream's changelog:
* timers: queue up killing ephemerals only if not already
We fix up a small detail in the timer logic that changed during the last
snapshot.
* receive: trim incoming packets to IP header length
Packets are now trimmed to their actual length, not their length+padding,
before handing to the rest of the network subsystem, so that packets look
pretty in tcpdump. This doesn't actually affect what userspace sees, since the
kernel trims it at a later stage, but it does make pcaps a bit nicer to use.
* curve25519: use more standard label convention in asm
This ensures that perf(1) shows the function name instead of the label name.
* compat: remove padata hotplug code
Fixes building on kernels that have HOTPLUG enabled but no PADATA support.
* config: add new line for style
* device: do-while assignment style
* peer: explicitly initialize atomic
Style.
* noise: fix race when replacing handshake
Handle a situation in which three peers, all running on the same system, begin
a handshake with all three of each other, at exactly the same time, on a
multi-CPU system.
* random: wait for random bytes when generating nonces and ephemerals
We've been working with upstream to add a new API to the kernel for ensuring
that the RNG actually is seeded. Until they merge it for 4.13, we provide a
poly-fill to the compat code. This means that WireGuard will block during
handshakes until the RNG has enough entropy, so that it's never in a
circumstance in which ephemeral keys are generated from bad randomness.
* go test: properly pad message
* go test: correct tai64n and formatting
* external-tests: add keepalive packet
* go test: use x/crypto for blake2s now that we have 128-bit mac
* external-tests: trim the fat
Improvements for the external tests.
* wg-quick: make sure we have empty table for both v6 and v4
* wg-quick: match ipv6 default route more broadly
Tiny nits with wg-quick, one of which should now allow multiple v6-only
wg-quick instances running at the same time.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
backend:
* cosmetics
frontend:
* "Save & Reply" now distinguish between normal and manual/backup mode
and triggers an appropriate reload or a start action
Signed-off-by: Dirk Brenken <dev@brenken.org>
Script priority adjusted.
Custom memory management turned off to save some memory on low-end device.
Signed-off-by: Antonio Paunovic <antonio.paunovic@sartura.hr>
backend:
* add new 'manual mode' to re-use blocklist backups during startup,
get fresh lists only via manual reload or restart action
* additional free memory check during dns restart to prevent OOM errors
* removed palevo tracker from default config,
this tracker has been discontinued
* cosmetics
LuCI frontend (see luci repo):
* add new 'manual mode' under extra options
Signed-off-by: Dirk Brenken <dev@brenken.org>
The smartsnmpd SConstruct file only accepts setting CFLAGS and does not
use CPPFLAGS, so pass both down using CFLAGS.
This fixes build errors with external toolchains that don't
automatically search for headers in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Make sure we pass down TARGET_CPPFLAGS and TARGET_LDFLAGS to fix build
with external toolchains that don't automatically search for headers and
libraries in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This was removed in LEDE commit 0b7ed65cec
("kernel: remove out of tree direct-io disable hack")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
After checking in the ipkg-install dir of netatalk,
it seems that the permissions it sets to the conf-files
are 644.
# ls -la lede/build_dir/target-mips_24kc_musl/netatalk-3.1.11/ipkg-install/etc
-rw-r--r-- 1 sandu sandu 226 iun 5 20:53 afp.conf
-rw-r--r-- 1 sandu sandu 1948 iun 5 20:53 dbus-session.conf
-rw-r--r-- 1 sandu sandu 25037 iun 5 20:53 extmap.conf
While the Package/netatalk/install build rule overrides
them to 600.
According to
* https://github.com/openwrt/packages/issues/4318
* https://forum.lede-project.org/t/help-with-apple-filesharing-protocol-for-time-machine/3259/5
this is a problem in some setups.
So, this patch changes them to what the netatalk
package creators intended initially (i.e. 644).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The earlier commit ea119211b2 removed 'dsa' as one of the ssh_host_*_key
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Alexandru Ardelean
Rafał Miłecki
Jason A. Donenfeld
Eric Luehrsen
Alvaro [Andor]
Dirk Brenken
Peter Wagner
Daniel Golle
Florian Eckert
Philip Prindeville
Paul Oranje
Hans Dedecker
Yousong Zhou
Florian Fainelli
Antonio Paunovic
Federico Di Marco
Karl Palsson
W. van den Akker
Sami Olmari