Version 1.0.1 brought the following changes:
[v1.0.1] - 2021-11-26
Primarily fixes a few issues in the kernel module that were found
during a quick review from Russell King:
https://lore.kernel.org/netdev/YYPThd7aX+TBWslz@shell.armlinux.org.uk/https://lore.kernel.org/netdev/YYPU1gOvUPa00JWg@shell.armlinux.org.uk/
- mdio: The mvls subcommand now supports flushing the ATU
- mdio-netlink: Plug some glaring holes around integer overflows of
the PC.
- mdio-netlink: Release reference to MDIO bus after a transaction
completes.
So, update to the latest version and switch the kernel module back
to fetching tarballs like the userspace tool does.
Signed-off-by: Robert Marko <robimarko@gmail.com>
The musl headers contain defines which are incompatible with kernel builds.
For example alltypes.h contain a __BIG_ENDIAN define. This will force
various kernel functions/macros to be build in a way which requires the
target system to be big endian. But if the target system is actually little
endian, these function will then not perform there intended tasks. The
actual (hard to debug) effects can vary between minor problems and fatal
errors.
This is port of the fix from OpenWrt's commit 9ac47ee46918 ("build: use
-nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules")
Fixes: 17cd1793bbec ("ovpn-dco: Add package")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Add AUTORELEASE as 19.07 compatibility is not needed.
Add dependency hacks and add comments.
Add upstream patch to get rid of FS_POSIX_ACL requirement.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This reverts commit 6a0ae4b19d.
ksmbd 3.4.0 reworks its dependencies as a result of upstream feedback.
Unfortunately, this means that it now relies on CONFIG_FS_POSIX_ACL,
which is not easy to direcly enable in OpenWrt.
Revert in order to fix multiple build failures that people experience.
Switch to AUTORELEASE for simplicity. Now that kernel 5.4 is the
minimum, no need to have compatibility with 19.07.
Added new dependencies. Removed some transient ones.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways:
MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example.
Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely.
Signed-off-by: Damien Mascord <tusker@tusker.org>
Major changes are:
clean-up codes using checkpatch --strict option.
fix several warning and build failure from linux-next.
change the minimum supported kernel version to v5.4.
use xarray for tree connect list.
fix reviews from lkml.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Major change are:
Fix an issue that directories appear as files when using windows
backup.
Fix xfstests generic/241 failure on life test.
Update ksmbd shutdown and debug print on/off using ksmbd.control in
cifsd.rst.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Major changes are:
Fix kernel oops from fuse+ntfs driver.
Fix the issue of change the directory to the file using Nautilus
client.
Fix ksmbd build break with the latest linux-5.12-rc1.
Fix potential memleak and use after free.
Fix use after free from KASAN(racy issue)
Signed-off-by: Rosen Penev <rosenp@gmail.com>
When building mtd-rw for a target based on Kernel 5.10 which has
CONFIG_MTD disabled the build fails with
ERROR: "put_mtd_device" [../mtd-rw.ko] undefined!
ERROR: "get_mtd_device" [../mtd-rw.ko] undefined!
Omit building the package for such a target.
Signed-off-by: David Bauer <mail@david-bauer.net>
The crude loop I wrote to come up with this changeset:
find -L package/feeds/packages/ -name patches | \
sed 's/patches$/refresh/' | sort | xargs make
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Major changes for version 3.3.5 are:
- Add support for version 4 dos attribute structure of samba.
- Implement maximal allowed desired access.
- Fix several error handling.
- Fix a few smbtorture failures.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Major changes are:
Make xattr format of ksmbd compatible with samba's one.
Use netdevice_notifier to configure TCP listeners.
Fix a build break with linux-5.11 kernel.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The major changes are:
Fix some of xfstests tests failures when actimeo=0 mount option
is not used in local.config of xfstests.
WSL reparse tags support for special files.
Fix several permission issues.
Set O_PATH and O_NONBLOCK flags to open_flags.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Major change for version 3.3.1 are:
- Fix insmod failure if CONFIG_FS_POSIX_ACL is not set in config.
Major changes for version 3.3.0 are:
- Add ACLs support
- Add Kerberos support
- Add query info/query dir/statfs for smb3.1.1 posix extension.
- Fix warnings from checkpatch.pl
- Fix racy issue reported and warnings from KSAN by OpenWRT.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* cifsd: release 3.2.5 version
* cifsd: fix unassigned pointer access in smb_fileinfo_rename()
* cifsd: remove unneeded ksmbd_fd_put() in find_next()
* cifsd: always zero-initialize ksmbd_dir_info in smb1pdu
* cifsd: make spnego depend on the "extended security" bit in flags2
* cifsd: add support for weird clients with off-by-one buffer size issues
* cifsd: allow SMB_COM_ECHO without valid user session
* cifsd: fix potential null pointer dereferencing error of tfm in alloc_shash_desc()
* cifsd: fix potential overflow issue in ___server_conf_set()
* cifsd: add xfstests cases in travis-CI
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
upstream changelog:
* cifsd: release 3.2.4 version
* cifsd: don't support FSCTL_VALIDATE_NEGOTIATE_INFO if connect dialect is smaller than SMB3.02
* cifsd: initialize server using init_smb2_0_server() instead of init_smb3_11_server()
* cifsd: fix auto negotiation failure when setting min/max protocol is higher than SMB 2.0
* cifsd: sign session setup response on SMB3.0 and SMB3.02
* cifsd: make 8byte context alignment when there is the next context in negotiate contexts
* cifsd: fix null pointer dereferencing error in ->set_sign_rsp()
* cifsd: ignore EOPNOTSUPP error from ksmbd_vfs_alloc_size
* cifsd: fix warning: unused variable small_sz
* cifsd: release 3.2.3 version
* cifsd: set correct status code on ksmbd_vfs_readdir error
* cifsd: fix stuck issue while writing many files with windows client
* cifsd: return only a single entry if SMB2_RETURN_SINGLE_ENTRY is set
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
This leverages on -iremap flag embedded there since the build system
commit 4ed356fa719e ("kernel.mk: add KCFLAGS to make kmods reproducible")
Reported-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.
Signed-off-by: David Bauer <mail@david-bauer.net>
exFAT fs driver has been upstreamed as a staging driver since linux 5.4.
The package name kmod-fs-exfat is used for that.
Three things happened in this commit
- The package will only be built for kernel 4.14 and 4.19
- The driver will be available as opkg package "kmod-fs-exfat0".
"kmod-fs-exfat" is to be used for the one in upstream kernel
- Mark "kmod-fs-exfat0" as deprecated in package title
Signed-off-by: Paul Blazejowski <paulb at blazebox.homeip.net>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(rename, rewording, and deprecation)
* ksmbd: update to 3.1.3
* ksmbd-tools: update to 3.2.1
* add new package build option "KSMBD_SMB_INSECURE_SERVER"
* enable smb1 support to kmod by default
* add new UCI option "allow_legacy_protocols" to section [globals]
* ksmbd: release 3.1.3 version
* ksmbd: lock SMB2_QUERY_INFO_HE request with read lock
* ksmbd: fix potential racy between query_dir and ksmbd_vfs_empty_dir
* ksmbd: fix racy issue between deleting file and checking empty directory
* ksmbd: don't register interface which are member of bridge
* ksmbd: SO_REUSEADDR is no property of tcp_setsockopt
* ksmbd: release 3.1.2 version
* ksmbd: fix read caching buffer size as max_read_size
* ksmbd: fix the infinite loop of handling FSCTL_QUERY_ALLOCATED_RANGES
* ksmbd: use compounding for smb2 flush
* ksmbd: downgrade error message to debug in get_file_all_info
* ksmbd: rename usmbd to ksmbd.mountd in trvis-ci
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: update README file
* ksmbd-tools: release 3.2.1 version
* ksmbd-tools: revert "remove glib2.0 dependancy" patch
* ksmbd-tools: release 3.2.0 version
* ksmbd-tools: update how to restart ksmbd in README file
* Revert "ksmbd-tools: disable tbuf and rbuf caching by default"
* ksmbd-tools: disable tbuf and rbuf caching by default
* ksmbd-tools: replace usmbd prefix with ksmbd prefix
* ksmbd-tools: update README file
* ksmbd-tools: fix warning ignoring return value of 'fread'
* ksmbd-tools: downgrade unsupported command print to debug
* ksmbd-tools: remove GLIB_LIBS in Makefiles
* ksmbd-tools: rename usmbd, smbuseradd, smbshareadd to ksmbd.mountd, ksmbd.adduser and ksmbd.addshare
* ksmbd-tools: fix null pointer dereference in _list_remove
* ksmbd-tools: fix the sanity check fails depending on the password length
* ksmbd-tools: fix build error(not found glib.h)
* ksmbd-tools: remove glib-2.0 dependancy
* ksmbd-tools: update README to add libglib2.0-dev for Ubuntu preprequisite packages
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* rename smbd->ksmbd (upstream name change)
* ksmbd-tools: build with static glib2 (usmbd = ~90kb, smbuseradd = ~40kb)
* new etc folder location = /etc/ksmbd/smb.conf
* new database name = /etc/ksmbd/ksmbdpwd.db
* fixes "map to guest = Bad User" while userdb is also used
* fixes missing ipv6 support
* update/rename to "luci-app-ksmbd"
* remove UCI samba compatibility code for section names (ksmbd uses [share] + [globals] not [sambashare] + [global])
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: release 3.1.0 version
* ksmbd: fix over 80 character warnings
* ksmbd: rename smbd-tools to ksmbd-tools in travis.yml
* ksmbd: fix password db file location in travis.yml
* ksmbd: rename smbd prefix function to ksmbd
* ksmbd: rename smbd prefix source files to ksmbd
* Revert "smbd: set connection status with SMBD_SESS_EXITING instead of direct destory"
* ksmbd: rename smbd to ksmbd in .travis.yml
* smbd: rename module name to ksmbd.ko
* smbd: set connection status with SMBD_SESS_EXITING instead of direct destory
* smbd: previous session with same user and same password should be deleted
* smbd: only use global session table in smb2 session
* smbd: add support for ipv6
* smbd: fix empty macro issue from smbd_debug
* cifsd: fix printing of file names in find_next
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* fix reload/restart not applying luci/smb.conf changes
* remove hotfix for 'read only = no' (fixed by upstream)
* update documentation, example
*cifsd: fix the lost of dos file attributes
*cifsd: store FILE_ATTRIBUTE_SPARSE into xattr
*cifsd: release v2.0.2
*cifsd-tools: add smb.conf.list file to show supported parameters list
*cifsd-tools: set CIFSD_SHARE_FLAG_WRITEABLE flags if read only = no
*cifsd-tools: release cifsd-tools v2.0.2
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* cifsd: fix uninitialized fp could be freed
* cifsd: fix potential uninitialized spnego_blob could be freed
* cifsd: smbd: replace spinlock_irqsave with spinlock
* cifsd: smbd: avoid the lack of client's send credits
* cifsd-tools: add version generation script
* cifsd-tools: do not abbrev git describe
* cifsd-tools: use 'unknown' version string if git describe fails
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
They use the same source. It makes no sense to have them separate.
Also cleaned up the Makefile to modern standards.
Fixed license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* update to git (2019-08-19)
* use new "kill_server" sysfs option on stop
* ensure reload_service() works correctly
* add inherit owner, force create mode, force directory mode UCI options
* add patches for mips target (vfree, vmalloc)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Robert Marko
Sven Eckelmann
Jianhui Zhao
Michel Promonet
Marcos Del Sol Vives
Rosen Penev
Michael Heimpold
Damien Mascord
David Bauer
Ilya Lipnitskiy
Martin Blumenstingl
Andy Walsh
DENG Qingfang
Yousong Zhou
Carey Sonsino
Richard Yu