The Makefile would still force the use of and linking against uClibc++
even though libstdc++ may have been chosen, which would result in the
package depending on libstdcpp ($(CXX_DEPENDS) but we would still be
missing an libuClibc++ library depdency.
Fix this by looking at CONFIG_USE_UCLIBCXX to adjust the configure
script variables.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We are not properly passing down TARGET_CFLAGS and TARGET_CPPFLAGS and
this can be noticed with external toolchains with the following build
error:
mipsel-linux-gnu-gcc -Wall -Wextra -pedantic -Waggregate-return
-Wcast-align -Wcast-qual -Wdisabled-optimization -Wpointer-arith
-Wshadow -Wsign-compare -Wundef -Wwrite-strings -Wbad-function-cast
-Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs
-Wstrict-prototypes -O2 -std=c99 -I../lua/ -fPIC -c -o lpvm.o lpvm.c
lpvm.c:10:17: fatal error: lua.h: No such file or directory
#include "lua.h"
^
compilation terminated.
make[4]: *** [lpvm.o] Error 1
Re-use COPT to pass our TARGET_CFLAGS and TARGET_CPPFLAGS
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Passing GNU_TARGET_NAME implies that we have a 4-group triplet (e.g:
arm-openwrt-unknown-linux), and this works fine with pciutils'
lib/configure operating system detection. If we have an external
toolchain (e.g: mipsel-linux-gnu), the configure script is all confused
and ends-up picking up i386-ports, which is not valid on the target
architecture.
Finally, we are not passing TARGET_CPPFLAGS as we should, so let's do
that correctly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We would first not be able to properly detect libxml2 because it's not
automatically found, fix that by explicitly linking against it (and zlib
a dependency). Then if we don't don't define X_OPEN_SOURCE=500, we would
run into the following build error:
clish/shell/shell_execute.c: In function 'clish_shell_exec_action':
clish/shell/shell_execute.c:309:18: error: 'sigignore' undeclared (first
use in this function)
sa.sa_handler = sigignore; /* Empty signal handler */
^
clish/shell/shell_execute.c:309:18: note: each undeclared identifier is
reported only once for each function it appears in
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes build errors with external toolchains that don't automatically
append STAGING_DIR to the library search path:
/opt/toolchains/stbgcc-4.8-1.5/lib/gcc/mipsel-linux-gnu/4.8.5/../../../../mipsel-linux-gnu/bin/ld:
warning: libz.so.1, needed by
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so,
not found (try using -rpath or -rpath-link)
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzopen64'
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzdirect'
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzclose'
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzwrite'
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzdopen'
/local/users/fainelli/openwrt/trunk/staging_dir/target-mipsel-linux-gnu_glibc/usr/lib/libxml2.so:
undefined reference to `gzread'
collect2: error: ld returned 1 exit status
make[5]: *** [plistutil] Error 1
make[5]: Leaving directory
`/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/libplist-1.13/tools'
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The smartsnmpd SConstruct file only accepts setting CFLAGS and does not
use CPPFLAGS, so pass both down using CFLAGS.
This fixes build errors with external toolchains that don't
automatically search for headers in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We link against libshout which already links against libvorbisidec, this
is needed to pass the configure script that checks against libshout
symbols availability.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Make sure we pass down TARGET_CPPFLAGS and TARGET_LDFLAGS to fix build
with external toolchains that don't automatically search for headers and
libraries in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This was removed in LEDE commit 0b7ed65cec
("kernel: remove out of tree direct-io disable hack")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
After checking in the ipkg-install dir of netatalk,
it seems that the permissions it sets to the conf-files
are 644.
# ls -la lede/build_dir/target-mips_24kc_musl/netatalk-3.1.11/ipkg-install/etc
-rw-r--r-- 1 sandu sandu 226 iun 5 20:53 afp.conf
-rw-r--r-- 1 sandu sandu 1948 iun 5 20:53 dbus-session.conf
-rw-r--r-- 1 sandu sandu 25037 iun 5 20:53 extmap.conf
While the Package/netatalk/install build rule overrides
them to 600.
According to
* https://github.com/openwrt/packages/issues/4318
* https://forum.lede-project.org/t/help-with-apple-filesharing-protocol-for-time-machine/3259/5
this is a problem in some setups.
So, this patch changes them to what the netatalk
package creators intended initially (i.e. 644).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The earlier commit ea119211b2 removed 'dsa' as one of the ssh_host_*_key
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The author (@pprindeville) of the original commit noted that the wrong
commit was picked, see
325b7d2cd2 (commitcomment-22387528)
"Err... looks like the wrong fix got committed. I was hoping that this
commit d902e5d would have gone in instead."
This reverts commit 325b7d2cd2d6e9d4903c6e7628c7c9ae0ddab564.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This package requires libxml2 & libxslt to be built, has some
C code so it's not installable via pip.
It needs cross-compilation.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Fixes the following build error with an external toolchain:
./bld/sqlite3.o: In function `fts5Bm25Function':
sqlite3.c:(.text+0x27234): undefined reference to `log'
./bld/piechart.o: In function `piechart_render':
piechart_.c:(.text+0x430): undefined reference to `sincos'
piechart_.c:(.text+0x47c): undefined reference to `sincos'
piechart_.c:(.text+0x548): undefined reference to `sincos'
collect2: error: ld returned 1 exit status
src/main.mk:526: recipe for target 'fossil' failed
make[3]: *** [fossil] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-fhonour-copts is an OpenWrt/LEDE toolchain specific patch, forcing it
will make external toolchain fail to build this package. What we need
instead is a way to override CFLAGS from the different Makefile files so
rename the patch to illustrate that.
Fixes: 317c2469d9 ("libcanfestival: fix several small build process issues")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This backports a patch that has been accepted upstream in linuxptp:
8b61aa2c3f ("udp: Avoid including
netdb.h") to fix build errors with external glibc toolchains that
provide rpc/types.h.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The extensions tries to register some string constants after quering
version strings from underlaying libcurl. However, depending on libcurl's
configuration these strings could also be NULL, which was not handled
properly.
An upstream pull request for this patch is waiting for review.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Conserver is an application that allows multiple users to use
serial consoles at the same time, with logging. It has a client-
server design which makes it easy to manage a distributed set
of serial consoles. Logging makes post-crash analyses easier.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Update tmux to 2.5
Drop patch
Update homepage URL
Use toolchain functionality for configuring and compiling
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Florian Fainelli
Daniel Golle
Peter Wagner
Alexandru Ardelean
Ted Hess
Hauke Mehrtens
Daniel Golle
Philip Prindeville
W. van den Akker
Hannu Nyman
Luiz Angelo Daros de Luca
Michael Heimpold
Bjørn Mork
champtar
Daniel Engberg
Luka Perkov