- new package dependency: curl (plus one of the wpad variants)
- optional package dependencies:
- 'msmtp' for email notification support
- 'wireguard' or 'openvpn' for vpn support
- removed WEP support, only WPA/WPA2/WPA3 are supported!
- new, more robust setup wizard (CLI and LuCI)
- more robust captive portal detection
- randomize mac addresses with every uplnk connect
- automatic vpn handling during uplink switch (only classic/simple
client-setups for wireguard or openvpn are supported)
- email notifications after successful uplink connections
- automatically disable uplinks after n minutes, e.g. for timed
connections
- automatically (re-)enable uplinks after n minutes, e.g. after failed
login attempts
- complete LuCI rewrite - migrated to client side JS (separate PR)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* automatically add open uplinks to your wireless config,
e.g. hotel captive portals (disabled by default)
* shift net status check in a separate function
* (s)hellcheck cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add missing dnsmasq dependency
* add a captive portal auto-login hook (configurable via uci/LuCI),
you could reference an external auto-login script - see readme
* provide an auto-login script for german ICE hotspots
(/etc/travelmate/wifionice.login), requires 'curl'
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add captive portal domains automatically to the related
domain whitelist (dhcp option 'rebind_domain'),
if rebind protection/RFC1918 is enabled
Signed-off-by: Dirk Brenken <dev@brenken.org>
* proactively scan and switch to a higher prioritized uplink,
despite of an already existing connection,
this is configurable via 'trm_proactive' option
(default '1', enabled)
* fix some minor list trim issues
* optimize wlan scanning behavior
* refine debug messages
Signed-off-by: Dirk Brenken <dev@brenken.org>
* with the config option 'trm_radio' you can now restrict travelmate
to a single radio (e.g. 'radio1') or change the overall
scanning order (e.g. 'radio1 radio2 radio0')
* LuCI: show QR codes now inline on the overview page
(collapsed by default)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* remove needless third status "not connected", use only "running / not
connected" and "connected"
* change indentation from spaces to tabs (saves 4kb)
* small fixes
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer rename faulty uplinks in /etc/config/wireless, but save
uplink state in json runtime information. To reset the saved state
simply restart travelmate processing.
Signed-off-by: Dirk Brenken <dev@brenken.org>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* checks continuously the signal quality for conditional
uplink (dis-) connections
* captive portal detection with internet online check and
a 'heartbeat' function to keep the uplink connection up & running
Signed-off-by: Dirk Brenken <dev@brenken.org>
* limit sta interface selection/handling
to defined travelmate interface (trm_iface) only
* check eap capabilities and ignore enterprise uplinks
as long as eap support is not available
* documentation update
* cosmetics
* LuCI: various cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
* backend/frontend: supports a Connection Limit ('trm_maxretry')
of '0', to disable this feature (unlimited retries)
Signed-off-by: Dirk Brenken <dev@brenken.org>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
backend:
* handle errors due to misconfigured uplinks
* various bugfixes
luci frontend:
* add a powerful wireless station manager to edit and delete existing
interfaces or scan for new uplinks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer misuse ubus/procd service object for travelmate runtime
information, now save all required information directly
in a JSON file/format
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested & slow modem/router setups, set 'trm_triggerdelay' accordingly
* change start priority & refine reload timings
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* rework automatic mode (active scan/re-connection handling):
* much more procd & resource friendly
* now enabled by default
* save runtime information in ubus service (data section)
* final backend preparation for new LuCI-GUI (still WIP!)
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add an "active mode", where travelmate will be restarted
every n seconds (default 60) and checks existing uplink connection
regardless of ifdown event trigger (disabled by default)
* enhance multiple radio support
* fix the ap detection
* respect different radios during scanning & connection handling
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add 'enabled' check in init script
* support multiple radios (see online doc)
* fix race condition in ap check
Signed-off-by: Dirk Brenken <dev@brenken.org>
* switch to procd interface trigger
* no additional active monitor/polling in the background
* simplified code
* new option "trm_maxwait", how long (in seconds)
should travelmate wait for wlan interface reload action
(default: '20')
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* change option 'trm_iw' to boolean,
1 => use iw (default)
0 => use iwinfo
* option 'trm_maxretry' now accepts '0' to disable this check at all
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken