Nano 2.9.6 release notes:
GNU nano 2.9.6 "Gomance" fixes a crash in word completion,
makes --enable-altrcname work again, improves the fluidity
of scrolling when using the touchpad, tweaks the syntaxes
for shell scripts and PO files, makes a replacing session
go always forward by default, no longer inserts a newline
after an external spell check of a selected region, always
accepts the English Y and N (and A) at a yes-no prompt in
any locale, and solves a few hypothetical bugs.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
mysql was replaced by mariadb. The lazy dependency
"+PACKAGE_libmysqlclient:libmysqlclient" does not work anymore as
"PACKAGE_libmysqlclient" no longer exists. This results in:
Package gammu is missing dependencies for the following libraries:
libmysqlclient.so.18
This commit addresses that.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Print all files from /var/prometheus/*.prom. This behaviour allow users
to add metrics with non-lua scripts.
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Observed once in about two dozen builds on the bots:
make[6]: *** No rule to make target '/build/lede-snapshots/arm_cortex-a7_neon-vfpv4/build/sdk/staging_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/usr/lib/libevent.so', needed by 'tests/async_queries'. Stop.
Address this by adding libevent2 to PKG_BUILD_DEPENDS.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
MariaDB is a drop-in replacement for MySQL. This commit adds a current
and stable version of MariaDB to the tree.
Quite a few ideas/patches were copied from Alpine Linux, Busybox Buildroot
and Debian.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
If bmx7 isn't running just yet the folder
`/var/run/bmx7/json/originators` is missing and so the while loop runs
non stop. Now the loop sleeps for 10 seconds if inotifywait fails.
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Makes it easy to address bmx7 shorids and hostnames with ping, ssh, etc.
Both are stored in /tmp/hosts/ and so loaded by dnsmasq.
Instead of using a cron job which triggers the bmx7 deamon every so and
so, inotifywait is used to see creation or deletion of originators in
/var/run/bmx7/json/originators/
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Now monitors as well the tunIn parameters, aka the annoucend routes to
the network. This is handy to check if a node annouces itself as a
gateway.
Also list all activated plugins.
Example output:
# TYPE bmx7_tunIn gauge
bmx7_tunIn{name="myIP4",network="10.198.52.86/32"} 1
bmx7_tunIn{name="myIP6",network="2012:0:0:56::/128"} 1
bmx7_tunIn{name="inet4",network="0.0.0.0/0"} 1
# TYPE bmx7_plugin gauge
bmx7_plugin{name="bmx7_config.so"} 1
bmx7_plugin{name="bmx7_json.so"} 1
bmx7_plugin{name="bmx7_sms.so"} 1
bmx7_plugin{name="bmx7_tun.so"} 1
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Patch 903-no-examples.patch removes MinOZW binary. This is wrong since
install section of openzwave is still using it. We can either remove the
patch or remove install section for openzwave. It seems people are using
this binary so we remove the patch.
After removing the patch the following issue appears with gcc7:
cc1plus: error: -Wformat-security ignored without -Wformat
This is resolved by adding the following to Makefile
TARGET_CPPFLAGS+=-Wno-format -Wno-format-security
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Update nano to 2.9.5
Release Notes:
2018 March 29
GNU nano 2.9.5 "Kiša pada" changes the way the Scroll-Up
and Scroll-Down commands work (M-- and M-+): instead of
keeping the cursor in the same screen position they now
keep the cursor in the same text position (if possible).
This version further adds a new color name, "normal",
which gives the default foreground or background color,
which is useful when you want to undo some overzealous
painting by earlier syntax regexes. Bug fixes include:
a segfault when trying to insert a file in restricted
mode, the reading in of a new file being "undoable", a
slight miswrapping of help texts when --linenumbers was
used, and the shell syntax coloring the word "tar" in
file names.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
acpid can react on netlinkn events that are generated also from SoC
GPIO driven event, not only acpi x86 BIOS
Signed-off-by: Antonio Silverio <menion@gmail.com>
mysql already makes sure that the compiler emits position-independent code when
appropriate, namely when compiling shared objects. The mysql build system puts
its own flag behind the CFLAGS, overriding whatever was set before.
Additionally, forcing applications into PIC mode will just slow them
down (mysql not only provides shared objects but also applications).
Last but not least OpenWrt's $(FPIC) can cause build failures. This is
the case currently for AARCH64:
net_serv.o: In function `my_net_init':
net_serv.cc:(.text+0x28): relocation truncated to fit: R_AARCH64_LD64_GOTPAGE_LO15 against symbol `my_malloc' defined in .text section in ../mysys/libmysys.a(my_malloc.o)
net_serv.cc:(.text+0x28): warning: Too many GOT entries for -fpic, please recompile with -fPIC
/data/bowl-builder/aarch64_cortex-a53/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-7.3.0_musl/bin/../lib/gcc/aarch64-openwrt-linux-musl/7.3.0/../../../../aarch64-openwrt-linux-musl/bin/ld: final link failed: Symbol needs debug section which does not exist
collect2: error: ld returned 1 exit status
Makefile:955: recipe for target 'mysqld' failed
make[7]: *** [mysqld] Error 1
Remove $(FPIC) from TARGET_CFLAGS to address all of the above.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patch 903 disables building of examples.
Patch 904 fixes the following issue:
When building software that build depends on openzwave, build will
always search in /usr/include/openzwave instead of
staging_dir/.../usr/include/openzwave.
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* vfs support needs an additional ini file and another directory by
default (/usr/lib/mc/extfs.d), backport of a turris fix.
* cleanup makefile
Signed-off-by: Dirk Brenken <dev@brenken.org>
f056af0 Fix bug: double free when execute a command timeout
69260b6 Fix bug: Error class did not match the server
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
Updated to R56c.
Also add myself as maintainer and move the location from `Base system`
into `Utilities/Shells`.
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* properly install config file
* prevent smsd from starting right after installation to prevent loss of data
(make default device unavailable by turning configuration into comments)
* move init script to procd
* update init script priority to sane value
* log to syslog - at the moment via stdout and procd
this is a workaround to force smsd to stay in the foreground
* the init script can't do a modem reset anymore
use an alarmhandler script instead
* add a local patch to make all processes terminate if the main process dies
* take over the package as new maintainer
Signed-off-by: Harald Geyer <harald@ccbib.org>
It was missing in a previous change bab8741 (tree: use
TARGET_{CFLAGS,LDFLAGS} instead of the package default)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Support for little-endian word-order of 32-bit fields was added
upstream recently. Import the corresponding PR
https://github.com/collectd/collectd/pull/2660
into a local patch and bump package release.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Here are the notable changes
- pixman is now not part of the release tarball and is required as an
external dependency
- archipelago is removed by upstream
- patches are regenerated with git-format-patch
- ifunc requirement is now removed
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* use full package list when checking for upgrades
* verify sha256sums and usign signature of sha256sums.sig
* introduce '-c' option to only check if system is up-to-date
* introduce '-F' option to ignore the signature verification result
* return -1 on locally caused and -2 on server-side errors
* don't include locally appended attributes in debug output of a
server reply
* output bug report note on 412 target not found
* use content-length header instead of filesize field in JSON content
* suppress duplicate error messages
* drop unused attributes
* make debug messages optional at compile-time
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Upstream has moved to GitHub. Also the hash of the original link and what is in OpenWrt's mirrors does not mach. This may have been motivation for moving away from SourceForge...
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hannu Nyman
Sebastian Kemper
Paul Spooren
Hirokazu MORIKAWA
Daniel Engberg
Michael Heimpold
Maxim Storchak
Daniel Golle
Marko Ratkaj
Rosen Penev
Paul Wassi
Antonio Silverio
Vladimir Ulrich
Dirk Brenken
Jianhui Zhao
Alexander Ryzhov
Alif M. Ahmad
Harald Geyer
Yousong Zhou
Toni Uhlig