stubby: enable configuration through uci system

This commit brings UCI support to the stubby package.

    o All options are documented in the README.md file.
    o The README.md file has been re-written to include a short usage
      manual.
    o The default configuration now includes more Cloudflare addresses.
    o The stubby service is (re)started using procd triggers from a
      specified interface with a configurable time delay.
    o Round robin use of upstream resolvers is now activated by
      default.
    o Client privacy is now activated by default.
    o Options are added for specifying the log level of the daemon and
      command line options passed to the stubby command.

Signed-off-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>

rsyslog: Update to 8.38

stubby: some fixes, cleanup, and improvements

simplejson: Update to 3.16

patch: Fix CVE-2018-6952 and CVE-2018-1000156

Version .8 no longer uses Autotools and will thus take a while to be
supported.

Silenced the build from warnings to help fix a bunch of -Wformat ones that
currently break the buildbots.

Explicitly disabled all plugins that are currently unused to save on build
time.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Added PKG_CPE_ID for proper CVE tracking.

Added PKG_BUILD_PARALLEL for faster compilation.

Added --disable-gtk-doc-html to fix parallel compilation.

Cleaned up and reorganized configure flags.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Peter Wagner <tripolar@gmx.at>

Patches taken from official git repository.

Added PKG_CPE_ID for proper CVE tracking.

Added PKG_BUILD_PARALLEL for faster compilation.

Also adjusted Makefile to be more similar to other projects.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

umurmur: Switch to tarball

procps-ng: Update to 3.3.15

openpyxl: Update to 2.5.7

gunicorn: Update to 19.9.0

django: Update to 1.11.15

django-constance: Update to 2.3.0

django-picklefield: Update to 1.1.0

django-postoffice: Update to 3.1.0

django-restframework: update to 3.8.2

django-statici18n: Update to 1.8.2

Go 1.11 added softfloat support for 64-bit MIPS systems[1], so this also
adds builds for mips64 and mips64el.

[1] https://golang.org/doc/go1.11#mips

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

i2pd: Update to 2.21.0

Sysrepo release 0.7.5

libpsl: Disable documentation and enable parallel building

knot: update to 2.7.3

mwan3: improvments

Signed-off-by: Daniel Salzman <daniel.salzman@nic.cz>

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

Get downtime information for the tracked mwan3 wan interfaces.
The information shows how long this interface is in disconnected state.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

Get uptime information for the tracked mwan3 wan interfaces.
The information shows how long this interface is in connected state.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

This is now the same route as in the main table.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

If a interface is down, call ubus will return an null message which is
used to json_load, it causes json_get_vars gets value from last load and
l3_device various is nonzero.

Signed-off-by: Kyson Lok <kysonlok@gmail.com>

Signed-off-by: David Yang <mmyangfl@gmail.com>

setserial: Don't build docs to remove nroff dependency

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Since the switch to GCC7, this has not compiled as it assumes gnu89 behavior.

-fgnu89-inlining is not enough so use std=gnu89.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Probably a result of GCC7 that it fails now.

Added PKG_CPE_ID for proper CVE tracking.

Added PKG_BUILD_PARALLEL for faster compilation.

Reorganized Makefile slightly for consistency with other packages.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

python-yaml: Update to 3.13

Added PKG_USE_MIPS16 as it seems not to build under mipsel.

Error: opcode not supported on this processor: mips32r2 (mips32r2) `sync'

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Buildbots are failing as they lack nroff.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

The first is needed for 4.14 (maybe the relevant parts got packported and
the second is for when OpenWrt migrates to 4.19.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

xupnpd: Bumped version to latest commit (2018-09-26)

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

PR includes switch to codeload tarballs and rename from netopeer2 to
Netopeer2 for better codeload integration.

Signed-off-by: Mislav Novakovic <mislav.novakovic@sartura.hr>

Signed-off-by: Mislav Novakovic <mislav.novakovic@sartura.hr>

PR includes switch to codeload tarballs.

Signed-off-by: Mislav Novakovic <mislav.novakovic@sartura.hr>

PR includes switch to codeload tarballs.

Signed-off-by: Mislav Novakovic <mislav.novakovic@sartura.hr>

hplip: Update to 3.18.9

CVE-2013-7459 and CVE-2018-6594. Both patches taken from Fedora.

Also took the liberty to update the PKG_SOURCE_URL to a standard one.

Updated the home URL as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

mwan3: rtmon: filter out linkdown routing table