* add an "active mode", where travelmate will be restarted
every n seconds (default 60) and checks existing uplink connection
regardless of ifdown event trigger (disabled by default)
* enhance multiple radio support
* fix the ap detection
* respect different radios during scanning & connection handling
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Unbound UCI tries to protect embedded flash from excess
use. Unbound RFC5011 KSK tracking can rewrite root.key
every few minutes to an hour. It also writes and destroys
files in the same directory during the process.
Recommended UCI delays for copying busy work in /var/
back to /etc/ may be too conservative. These are all
changed from 28 to 9 days.
The RFC5011 KSK results were also destroyed by an
init.d restart, even if /var/ is mounted on persistent
storage like USB drive. /var/lib/unbound/root.key is
now preserved during this process, unless a newer key
is installed in /etc/ manually or package update.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* add tld compression,
this new "top level domain compression" removes up to 40 thousand
needless host entries from the block lists and
lowers the memory footprint for the dns backends by 8-10 MByte
* optimize restart behavior in case of an error
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Adds support for the fwmark option.
FwMark is a 32-bit fwmark for outgoing packets.
If set to 0 or "off", this option is disabled.
Signed-off-by: Dan Luedtke <mail@danrl.com>
Unbound 1.6.1 has a few bug fixes for resource leaks,
configuration robustness, compile environment interaction,
and maintaining the trust anchor. The 2017 trust anchor
(DS) is built into unbound and unbound-anchor.
File /etc/unbound/root.key holds 2010/2017 DS record until 2018
https://www.icann.org/resources/pages/ksk-rolloverhttps://www.iana.org/domains/root
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
To have service working nicely with procd it should be running in the
foreground. Otherwise it's not possible to e.g. stop it with the init.d
script. Luckily for us pptpd has a simple switch that allows it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Fixes: 15e7f611af ("pptpd: convert init script to procd")
This fixes upstream regression introduced in 1.4.40. It was reported &
debugged in https://redmine.lighttpd.net/issues/2793
This fix is queued for 1.4.46 in the personal/gstrauss/master upstream
branch.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* optimize memory consumption &
enable overall sort only on devices with > 64MB RAM,
this prevents sort related kernel dumps
Signed-off-by: Dirk Brenken <dev@brenken.org>
Update to 1.4.42 introduced a problem with starting lighttpd as
OpenWrt/LEDE service. It was stopping whole init process at sth like:
783 root 1124 S {S50lighttpd} /bin/sh /etc/rc.common /etc/rc.d/S50lighttpd boot
799 root 1164 S /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
It was hanging until getting random pool:
[ 176.340007] random: nonblocking pool is initialized
and then immediately the rest of init process followed:
[ 176.423475] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 176.430754] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 176.437615] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
This was fixed in 1.4.44, but bump directly to 1.4.45 while at it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* add 'enabled' check in init script
* support multiple radios (see online doc)
* fix race condition in ap check
Signed-off-by: Dirk Brenken <dev@brenken.org>
* various optimizations & corner case fixes
* removed no longer needed debug information
* polished up for forthcoming LEDE release ;-)
Signed-off-by: Dirk Brenken <dev@brenken.org>
This is a long-needed clean-up.
These applications are not gone! They live in the
luci repo now, where all their friends already are.
Signed-off-by: Dan Luedtke <mail@danrl.com>
Makefile had sed commands in "prepare" step that modified the
source files directly. That lead to feed update failure at the
buildbot.
Remove those commands as the first aid.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
According to the snmpd.conf man page, the engineID of an snmp agent
should be consistent through time. However, it seems that the engineID
changes every reboot. Add options to configure how the engineID is
generated. The default setting generates it based on the MAC address of
the eth0 interface.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When for example 'package/net/adblock' and DNSSEC vs NTP robustness
is enabled, significant restart thrashing can occur at boot up. DHCP
lease triggers may be occuring at the same time. Unbounds DNS-DHCP
may be incomplete until new DHCP solicit events. Solve this by
leaving a passive but complete host conf file during lease trigger.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Peter Wagner
Dirk Brenken
Eric Luehrsen
Stijn Tintel
Daniel Salzman
danrl
Martin Schiller
Ondřej Caletka
Stan Grishin
Rafał Miłecki
Nikil Mehta
Jason A. Donenfeld
Hsing-Wang Liao
Michael Heimpold
Sven Roederer
Hannu Nyman
Yousong Zhou
Gergely Kiss
Nikos Mavrogiannopoulos
Claudio Leite
Metafly
Jonas Gorski
Christian Schoenebeck