This was copied over from python-packages, when support for installing
packages host-side (via pip) was added.
Based on the discussion on this commit:
612c53fc6c
it was mentioned that removing this may add more benefit in terms of
reducing build time, because packages won't get reinstalled every time.
I'm not entirely sure about any potential side-effects of this, but it's
worth trying it out.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This also updates pip and setuptools.
With this occasion, they also get PKG_RELEASEs of their own.
Dropped patch 011-remove-setupterm-definition.patch
Manually re-applied 005-fix-bluetooth-support.patch
Ran make package/python/refresh to refresh other patches.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
zlib is now a host tool and the zlib/host package was removed. this
dependency is not needed any more as there will always be a zlib host
library.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Report https://github.com/openwrt/packages/issues/5638
It was mentioned that this causes build failures on Mac OS X.
The default behavior [in the setup.py script] is to check whether
`--with-system-ffi` is present in the CONFIG_ARGS env var.
However that back-fires a bit when `--with-system-ffi=no`, because the
condition `not '--with-system-ffi' in sysconfig.get_config_var("CONFIG_ARGS")`
evaluates to true.
This is a small bug in the `setup.py` script, but it looks like the
easiest/cleanest way to address it on our end is to just remove it entirely
from the HOST_CONFIGURE_ARGS.
At least that's how it looks like when testing on a Linux machine.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This change was introduced in commit 1c54e2b0fb to address build
issues on Ubuntu 12.04.
However it was reported to cause issues on Mac OS X.
Report: https://github.com/openwrt/packages/issues/5310
It was also reported that removing this on MacOS X fixes the issue.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Following a discussion on bugs.python.org:
* https://bugs.python.org/issue29708
* https://bugs.python.org/msg313384
It seems that setting a fixed value to PYTHONHASHSEED guarantees that
the bytecodes are generated consistently/in a reproducible manner.
Hopefully, this is the last bit to make Python3 build reproducible.
Tested this locally on a few files [that were not reproducible without
this change].
The PYTHONHASHSEED is only assigned to the host Python/Python3 during
compilation of byte-codes [from python source].
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
There have been some new dependencies added in recent versions of
Twisted (mostly internal classes that have been spun out into their own
libraries):
* constantly (#5453), since 16.5.0
* incremental (#5454), since 16.5.0
* Automat (#5456), since 17.1.0
* hyperlink (#5455) since 17.5.0
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
For python `src` packages we should clear out the DEPENDS
to prevent recursive deps from happening.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This is a new requirement for the Twisted package.
From the readme:
Automat is a library for concise, idiomatic Python expression of
finite-state automata (particularly deterministic finite-state
transducers).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This is a new requirement for the Twisted package.
From the readme:
Hyperlink provides a pure-Python implementation of immutable URLs. Based
on RFC 3986 and 3987, the Hyperlink URL makes working with both URIs and
IRIs easy.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This is a new requirement for the Twisted package.
From the readme:
Incremental is a small library that versions your Python projects.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This is a new requirement for the Twisted package.
From the readme:
A library that provides symbolic constant support. It includes
collections and constants with text, numeric, and bit flag values.
Originally twisted.python.constants from the Twisted project.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
python3 variant
Renaming the package is needed to allow for a Python 3 variant
(python3-zope-interface). Packages that depend on this (only twisted)
also have their dependencies adjusted.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This guarantees for the package feeds that
the mk files will always be available for all packages.
Will need to see about external-feed Python packages
a bit later.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The only difference just a parameter for Python3
[ -b to compile bytecodes in legacy mode ].
No need to keep 2 almost identical files now
that they're exported.
I'm a bit scared of that param, since it may get
removed at some point.
But let's see until then.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Since `lang/python` is it's own folder of Python packages
(for both Python 2 & 3), and these build rules are needed
in a lot of packages [especially Python packages],
putting them here makes sense architecturally,
to be shared.
This also helps get rid of the `include_mk` construct
which relies on OpenWrt core to provide, and seems
like a broken design idea that has persisted for a while.
Reason is: it requires that Python 2/3 be built to provide
these mk files for other Python packages,
which seems like a bad idea.
Long-term, there could be an issue where some other feeds
would require these mk files [e.g. telephony] for
some Python packages.
We'll see how we handle this a bit later.
For now we limit this to this feed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The .mk snippets are not really usable at the moment, as they cannot be
considered for metadata collection (package DUMP) when included through
include_mk. Python packages do not use include_mk anymore for this reason,
so the install commands can be removed as well.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Build depends refer to source package names, not binary package names.
In many cases, PKG_BUILD_DEPENDS simply duplicated runtime dependencies of
a source package's binary packages; as the corresponding source packages
are implicitly added as bulid dependencies, PKG_BUILD_DEPENDS can simply be
dropped in these cases. In the other cases, *_BUILD_DEPENDS is fixed to
refer to the correct source package name.
Dependency of mysql-server is adjusted from libncursesw to libncurses
(as libncursesw is a virtual package provided by libncurses), so the build
dependency on ncurses is emitted unconditionally.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
The Modules/getbuildinfo.c allows the use of DATE and TIME
macros to be defined via CFLAGS.
These vars, control the build date & time when the
interpreter is opened, and can be read via the
`platform._sys_version()` function.
So, a conversion from SOURCE_DATE_EPOCH to DATE & TIME
is required at build-time.
This is especially needed for `platform._sys_version()`
to work.
The installation of pip seems to rely on this.
The logic has been adapted from:
https://wiki.debian.org/ReproducibleBuilds/TimestampsProposal#Makefile
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This reverts commits 4333d1dcbf and
074d2863be, making Python packages
discoverable again by pkg_resources.
Fixes#5361.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This reverts commit 3c6d14021e.
( which is a revert of commit c764f77dc1 )
The initiall commit ( c764f77dc1 )
was reverted, becase zlib did not have a host-build.
Now it does:
cbe71649bc
So, now it should be good to put this in.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Re-worked patch `003-do-not-run-distutils-tests.patch`
to reduce patch-size.
Removed `011-fix-ncursesw-definition-colisions.patch`
it is fixed upstream.
Refreshed with `make package/python3/refresh`
Resetting PKG_RELEASE to 1.
This variable was never used for pip3 & setuptools, since
VERSION is specified in the package definitions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Fixes:
https://github.com/openwrt/packages/issues/5318
Not sure how this worked before.
The host python-cffi needs a libffi installed on the host side.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
See:
https://github.com/openwrt/packages/issues/5278
This should make Python & Python3 packages reproducible
when building.
In my local tests, I got the same sha256 for a sample
.pyc file, so likely this is the solution that should address
this.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Waldemar Konik
Alexandru Ardelean
Hauke Mehrtens
Gergely Kiss
Kimmo Vuorinen
Jeffery To
Matthias Schiffer