This removes lines that set PKG_BUILD_DIR when the set value is no
different from the default value.
Specifically, the line is removed if the assigned value is:
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
The default PKG_BUILD_DIR was updated[1] to incorporate BUILD_VARIANT
if it is set, so now this is identical to the default value.
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_SOURCE_SUBDIR)
if PKG_SOURCE_SUBDIR is set to $(PKG_NAME)-$(PKG_VERSION), making it
the same as the previous case
* $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
This is the same as the default PKG_BUILD_DIR when there is no
BUILD_VARIANT.
* $(BUILD_DIR)/[name]-$(PKG_VERSION)
where [name] is a string that is identical to PKG_NAME
[1]: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e545fac8d968864a965edb9e50c6f90940b0a6c9
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The CONTRIBUTING.md requests an (or multiple) SPDX identifier for GPL
licenses. But a lot of packages did use a different, non-SPDX style with a
"+" at the end instead of "-or-later".
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This was implicit with glib2 but got removed with
170ef79393
Fixed license tag to newer SPDX.
Removed PKG_BUILD_DIR as that is now default with upstream's
e545fac8d9
Minor reorganization for consistency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
CFLAGS were not being passed which was breaking ASLR builds.
Fixed license header.
Added PKG_BUILD_PARALLEL for faster compilation.
Added PKG_INSTALL for consistency.
Passed proper $(FPIC) value.
Several other Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The libyajl cleanup commit revealed that it was not being installed
correctly. Now that it is, mpd picks it up properly.
Enabled SoundCloud support for the full variant. Disabled for the mini.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since OpenWrt commit e82a4d9cfb ("config: regenerate *_shipped sources")
a few recursive dependencies have been discovered that were not visible
before.
$ make menuconfig
tmp/.config-package.in:103098:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:103098: symbol PACKAGE_baresip-mod-pulse depends on PACKAGE_baresip-mod-pulse
tmp/.config-package.in:121863:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:121863: symbol PACKAGE_pulseaudio-profiles depends on PACKAGE_pulseaudio-profiles
tmp/.config-package.in:121878:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:121878: symbol PACKAGE_pulseaudio-tools depends on PACKAGE_pulseaudio-tools
This commit addresses the pulseaudio package's own recursive
dependencies and partially resolves#9300 (baresip will be handled in
telephony repository).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
.. because it's confusing and doesn't seem to add any value.
The "auto configuration" looks for installed codec libraries and tells
squeezelite (through command line arguments) to exclude codec support if a
required library is missing.
If you have installed squeezelite-full, then all required codec libraries
are automatically installed as dependencies and the squeezelite binary won't
even run if there are missing libraries - ie the "auto configuration" will
always find all codecs and never disable any codecs. Toggling "auto
configuration" makes no difference and the setting is just confusing.
If you install squeezelite-mini the "auto configuration" can work, but
library checks are already done by dlopen() calls in squeezelite and codecs
are disabled if the necessary libraries are not found - ie the "auto
configuration" duplicates the library checks of squeezelite itself.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
This change is inspired by commit openwrt/openwrt@38b22b1e ("nghttp2:
deduplicate files in libnghttp2")
The packages in this commit are identified with the following command
grep -rin -E 'INSTALL_(DATA|BIN)' | grep -F '.so' | grep -F '*'
Some of them do not have symlinks and are not affected, but the change
is still applied for consideration of best practices just in case
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Two features which are not used by the package depend on a libc++.
Removing the proper entries in the Makefile allow compilation without a
libc++.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Adding new deps libopusfile and libopusenc, provided
by e9bbfacf0a and
a638dfa37b, respectively.
Changing maintainer as accorded with @thess.
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>
Package versions newer than 0.28 require meson/ninja which OpenWrt does not
support in its build environment. These files provide the minimum autotool
configuration necessary to build later versions.
Signed-off-by: Ted Hess <thess@kitschensync.net>
Clean up Makefile by utilizing toolchain logic
Make package pkg-config friendly
Add patch to prevent crashes due to overflow
Source: a50eecf65b
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
PulseAudio in some cases does not detect the ARM CPU's capabilities
correctly and enables NEON ASM while it is not supported. For example
when compiling for arm_arm1176jzf-s_vfp the assembler rejects this and
the compile fails:
{standard input}: Assembler messages:
{standard input}:27: Error: selected processor does not support `vld1.16 {d0},[r1]!' in ARM mode
{standard input}:28: Error: selected processor does not support `vmovl.s16 q0,d0' in ARM mode
{standard input}:29: Error: selected FPU does not support instruction -- `vcvt.f32.s32 q0,q0,#15'
{standard input}:31: Error: selected processor does not support `vst1.32 {q0},[r2]!' in ARM mode
{standard input}:70: Error: selected processor does not support `vld1.32 {q0},[r1]!' in ARM mode
{standard input}:71: Error: selected FPU does not support instruction -- `vcvt.s32.f32 q0,q0,#31'
{standard input}:72: Error: selected processor does not support `vqrshrn.s32 d0,q0,#16' in ARM mode
{standard input}:74: Error: selected processor does not support `vst1.16 {d0},[r2]!' in ARM mode
Makefile:8668: recipe for target 'pulsecore/libpulsecore_sconv_neon_la-sconv_neon.lo' failed
To fix this tell PulseAudio explicitly when to use the NEON ASM and when
not to.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Rosen Penev
Jeffery To
Jan Pavlinec
Sven Eckelmann
Espen Jürgensen
Sebastian Kemper
Robert Högberg
Yousong Zhou
Michal Čihař
Daniel Engberg
Ted Hess
Eduardo Abinader
Peter Wagner