You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

366 lines
9.8 KiB

package p2p
import (
"fmt"
"net"
"time"
"github.com/tendermint/go-crypto"
cmn "github.com/tendermint/tmlibs/common"
"github.com/tendermint/tmlibs/log"
tmconn "github.com/tendermint/tendermint/p2p/conn"
)
// Peer is an interface representing a peer connected on a reactor.
type Peer interface {
cmn.Service
ID() ID // peer's cryptographic ID
IsOutbound() bool // did we dial the peer
IsPersistent() bool // do we redial this peer when we disconnect
NodeInfo() NodeInfo // peer's info
Status() tmconn.ConnectionStatus
Send(byte, []byte) bool
TrySend(byte, []byte) bool
Set(string, interface{})
Get(string) interface{}
}
//----------------------------------------------------------
// peerConn contains the raw connection and its config.
type peerConn struct {
outbound bool
persistent bool
config *PeerConfig
conn net.Conn // source connection
}
// ID only exists for SecretConnection.
// NOTE: Will panic if conn is not *SecretConnection.
func (pc peerConn) ID() ID {
return PubKeyToID(pc.conn.(*tmconn.SecretConnection).RemotePubKey())
}
// peer implements Peer.
//
// Before using a peer, you will need to perform a handshake on connection.
type peer struct {
cmn.BaseService
// raw peerConn and the multiplex connection
peerConn
mconn *tmconn.MConnection
// peer's node info and the channel it knows about
// channels = nodeInfo.Channels
// cached to avoid copying nodeInfo in hasChannel
nodeInfo NodeInfo
channels []byte
// User data
Data *cmn.CMap
}
func newPeer(pc peerConn, nodeInfo NodeInfo,
reactorsByCh map[byte]Reactor, chDescs []*tmconn.ChannelDescriptor,
onPeerError func(Peer, interface{})) *peer {
p := &peer{
peerConn: pc,
nodeInfo: nodeInfo,
channels: nodeInfo.Channels,
Data: cmn.NewCMap(),
}
p.mconn = createMConnection(pc.conn, p, reactorsByCh, chDescs, onPeerError, pc.config.MConfig)
p.BaseService = *cmn.NewBaseService(nil, "Peer", p)
return p
}
// PeerConfig is a Peer configuration.
type PeerConfig struct {
AuthEnc bool `mapstructure:"auth_enc"` // authenticated encryption
// times are in seconds
HandshakeTimeout time.Duration `mapstructure:"handshake_timeout"`
DialTimeout time.Duration `mapstructure:"dial_timeout"`
MConfig *tmconn.MConnConfig `mapstructure:"connection"`
Fuzz bool `mapstructure:"fuzz"` // fuzz connection (for testing)
FuzzConfig *FuzzConnConfig `mapstructure:"fuzz_config"`
}
// DefaultPeerConfig returns the default config.
func DefaultPeerConfig() *PeerConfig {
return &PeerConfig{
AuthEnc: true,
HandshakeTimeout: 20, // * time.Second,
DialTimeout: 3, // * time.Second,
MConfig: tmconn.DefaultMConnConfig(),
Fuzz: false,
FuzzConfig: DefaultFuzzConnConfig(),
}
}
func newOutboundPeerConn(addr *NetAddress, config *PeerConfig, persistent bool, ourNodePrivKey crypto.PrivKey) (peerConn, error) {
var pc peerConn
conn, err := dial(addr, config)
if err != nil {
return pc, cmn.ErrorWrap(err, "Error creating peer")
}
pc, err = newPeerConn(conn, config, true, persistent, ourNodePrivKey)
if err != nil {
if err2 := conn.Close(); err2 != nil {
return pc, cmn.ErrorWrap(err, err2.Error())
}
return pc, err
}
// ensure dialed ID matches connection ID
if config.AuthEnc && addr.ID != pc.ID() {
if err2 := conn.Close(); err2 != nil {
return pc, cmn.ErrorWrap(err, err2.Error())
}
return pc, ErrSwitchAuthenticationFailure{addr, pc.ID()}
}
return pc, nil
}
func newInboundPeerConn(conn net.Conn, config *PeerConfig, ourNodePrivKey crypto.PrivKey) (peerConn, error) {
// TODO: issue PoW challenge
return newPeerConn(conn, config, false, false, ourNodePrivKey)
}
func newPeerConn(rawConn net.Conn,
config *PeerConfig, outbound, persistent bool,
ourNodePrivKey crypto.PrivKey) (pc peerConn, err error) {
conn := rawConn
// Fuzz connection
if config.Fuzz {
// so we have time to do peer handshakes and get set up
conn = FuzzConnAfterFromConfig(conn, 10*time.Second, config.FuzzConfig)
}
if config.AuthEnc {
// Set deadline for secret handshake
if err := conn.SetDeadline(time.Now().Add(config.HandshakeTimeout * time.Second)); err != nil {
return pc, cmn.ErrorWrap(err, "Error setting deadline while encrypting connection")
}
// Encrypt connection
conn, err = tmconn.MakeSecretConnection(conn, ourNodePrivKey)
if err != nil {
return pc, cmn.ErrorWrap(err, "Error creating peer")
}
}
// Only the information we already have
return peerConn{
config: config,
outbound: outbound,
persistent: persistent,
conn: conn,
}, nil
}
//---------------------------------------------------
// Implements cmn.Service
// SetLogger implements BaseService.
func (p *peer) SetLogger(l log.Logger) {
p.Logger = l
p.mconn.SetLogger(l)
}
// OnStart implements BaseService.
func (p *peer) OnStart() error {
if err := p.BaseService.OnStart(); err != nil {
return err
}
err := p.mconn.Start()
return err
}
// OnStop implements BaseService.
func (p *peer) OnStop() {
p.BaseService.OnStop()
p.mconn.Stop() // stop everything and close the conn
}
//---------------------------------------------------
// Implements Peer
// ID returns the peer's ID - the hex encoded hash of its pubkey.
func (p *peer) ID() ID {
return p.nodeInfo.ID
}
// IsOutbound returns true if the connection is outbound, false otherwise.
func (p *peer) IsOutbound() bool {
return p.peerConn.outbound
}
// IsPersistent returns true if the peer is persitent, false otherwise.
func (p *peer) IsPersistent() bool {
return p.peerConn.persistent
}
// NodeInfo returns a copy of the peer's NodeInfo.
func (p *peer) NodeInfo() NodeInfo {
return p.nodeInfo
}
// Status returns the peer's ConnectionStatus.
func (p *peer) Status() tmconn.ConnectionStatus {
return p.mconn.Status()
}
// Send msg bytes to the channel identified by chID byte. Returns false if the
// send queue is full after timeout, specified by MConnection.
func (p *peer) Send(chID byte, msgBytes []byte) bool {
if !p.IsRunning() {
// see Switch#Broadcast, where we fetch the list of peers and loop over
// them - while we're looping, one peer may be removed and stopped.
return false
} else if !p.hasChannel(chID) {
return false
}
return p.mconn.Send(chID, msgBytes)
}
// TrySend msg bytes to the channel identified by chID byte. Immediately returns
// false if the send queue is full.
func (p *peer) TrySend(chID byte, msgBytes []byte) bool {
if !p.IsRunning() {
return false
} else if !p.hasChannel(chID) {
return false
}
return p.mconn.TrySend(chID, msgBytes)
}
// Get the data for a given key.
func (p *peer) Get(key string) interface{} {
return p.Data.Get(key)
}
// Set sets the data for the given key.
func (p *peer) Set(key string, data interface{}) {
p.Data.Set(key, data)
}
// hasChannel returns true if the peer reported
// knowing about the given chID.
func (p *peer) hasChannel(chID byte) bool {
for _, ch := range p.channels {
if ch == chID {
return true
}
}
// NOTE: probably will want to remove this
// but could be helpful while the feature is new
p.Logger.Debug("Unknown channel for peer", "channel", chID, "channels", p.channels)
return false
}
//---------------------------------------------------
// methods used by the Switch
// CloseConn should be called by the Switch if the peer was created but never started.
func (pc *peerConn) CloseConn() {
pc.conn.Close() // nolint: errcheck
}
// HandshakeTimeout performs the Tendermint P2P handshake between a given node and the peer
// by exchanging their NodeInfo. It sets the received nodeInfo on the peer.
// NOTE: blocking
func (pc *peerConn) HandshakeTimeout(ourNodeInfo NodeInfo, timeout time.Duration) (peerNodeInfo NodeInfo, err error) {
// Set deadline for handshake so we don't block forever on conn.ReadFull
if err := pc.conn.SetDeadline(time.Now().Add(timeout)); err != nil {
return peerNodeInfo, cmn.ErrorWrap(err, "Error setting deadline")
}
var trs, _ = cmn.Parallel(
func(_ int) (val interface{}, err error, abort bool) {
_, err = cdc.MarshalBinaryWriter(pc.conn, ourNodeInfo)
return
},
func(_ int) (val interface{}, err error, abort bool) {
_, err = cdc.UnmarshalBinaryReader(pc.conn, &peerNodeInfo, int64(MaxNodeInfoSize()))
return
},
)
if err := trs.FirstError(); err != nil {
return peerNodeInfo, cmn.ErrorWrap(err, "Error during handshake")
}
// Remove deadline
if err := pc.conn.SetDeadline(time.Time{}); err != nil {
return peerNodeInfo, cmn.ErrorWrap(err, "Error removing deadline")
}
return peerNodeInfo, nil
}
// Addr returns peer's remote network address.
func (p *peer) Addr() net.Addr {
return p.peerConn.conn.RemoteAddr()
}
// CanSend returns true if the send queue is not full, false otherwise.
func (p *peer) CanSend(chID byte) bool {
if !p.IsRunning() {
return false
}
return p.mconn.CanSend(chID)
}
// String representation.
func (p *peer) String() string {
if p.outbound {
return fmt.Sprintf("Peer{%v %v out}", p.mconn, p.ID())
}
return fmt.Sprintf("Peer{%v %v in}", p.mconn, p.ID())
}
//------------------------------------------------------------------
// helper funcs
func dial(addr *NetAddress, config *PeerConfig) (net.Conn, error) {
conn, err := addr.DialTimeout(config.DialTimeout * time.Second)
if err != nil {
return nil, err
}
return conn, nil
}
func createMConnection(conn net.Conn, p *peer, reactorsByCh map[byte]Reactor, chDescs []*tmconn.ChannelDescriptor,
onPeerError func(Peer, interface{}), config *tmconn.MConnConfig) *tmconn.MConnection {
onReceive := func(chID byte, msgBytes []byte) {
reactor := reactorsByCh[chID]
if reactor == nil {
// Note that its ok to panic here as it's caught in the conn._recover,
// which does onPeerError.
panic(cmn.Fmt("Unknown channel %X", chID))
}
reactor.Receive(chID, p, msgBytes)
}
onError := func(r interface{}) {
onPeerError(p, r)
}
return tmconn.NewMConnectionWithConfig(conn, chDescs, onReceive, onError, config)
}