You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1099 lines
35 KiB

package consensus
import (
"bytes"
"context"
"fmt"
"testing"
"time"
cstypes "github.com/tendermint/tendermint/consensus/types"
"github.com/tendermint/tendermint/types"
cmn "github.com/tendermint/tmlibs/common"
"github.com/tendermint/tmlibs/log"
tmpubsub "github.com/tendermint/tmlibs/pubsub"
)
func init() {
config = ResetConfig("consensus_state_test")
}
func ensureProposeTimeout(timeoutPropose int) time.Duration {
return time.Duration(timeoutPropose*2) * time.Millisecond
}
/*
ProposeSuite
x * TestProposerSelection0 - round robin ordering, round 0
x * TestProposerSelection2 - round robin ordering, round 2++
x * TestEnterProposeNoValidator - timeout into prevote round
x * TestEnterPropose - finish propose without timing out (we have the proposal)
x * TestBadProposal - 2 vals, bad proposal (bad block state hash), should prevote and precommit nil
FullRoundSuite
x * TestFullRound1 - 1 val, full successful round
x * TestFullRoundNil - 1 val, full round of nil
x * TestFullRound2 - 2 vals, both required for full round
LockSuite
x * TestLockNoPOL - 2 vals, 4 rounds. one val locked, precommits nil every round except first.
x * TestLockPOLRelock - 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka
x * TestLockPOLUnlock - 4 vals, one precommits, other 3 polka nil at next round, so we unlock and precomit nil
x * TestLockPOLSafety1 - 4 vals. We shouldn't change lock based on polka at earlier round
x * TestLockPOLSafety2 - 4 vals. After unlocking, we shouldn't relock based on polka at earlier round
* TestNetworkLock - once +1/3 precommits, network should be locked
* TestNetworkLockPOL - once +1/3 precommits, the block with more recent polka is committed
SlashingSuite
x * TestSlashingPrevotes - a validator prevoting twice in a round gets slashed
x * TestSlashingPrecommits - a validator precomitting twice in a round gets slashed
CatchupSuite
* TestCatchup - if we might be behind and we've seen any 2/3 prevotes, round skip to new round, precommit, or prevote
HaltSuite
x * TestHalt1 - if we see +2/3 precommits after timing out into new round, we should still commit
*/
//----------------------------------------------------------------------------------------------------
// ProposeSuite
func TestProposerSelection0(t *testing.T) {
cs1, vss := randConsensusState(4)
height, round := cs1.Height, cs1.Round
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
startTestRound(cs1, height, round)
// wait for new round so proposer is set
<-newRoundCh
// lets commit a block and ensure proposer for the next height is correct
prop := cs1.GetRoundState().Validators.GetProposer()
if !bytes.Equal(prop.Address, cs1.privValidator.GetAddress()) {
t.Fatalf("expected proposer to be validator %d. Got %X", 0, prop.Address)
}
// wait for complete proposal
<-proposalCh
rs := cs1.GetRoundState()
signAddVotes(cs1, types.VoteTypePrecommit, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vss[1:]...)
// wait for new round so next validator is set
<-newRoundCh
prop = cs1.GetRoundState().Validators.GetProposer()
if !bytes.Equal(prop.Address, vss[1].GetAddress()) {
panic(cmn.Fmt("expected proposer to be validator %d. Got %X", 1, prop.Address))
}
}
// Now let's do it all again, but starting from round 2 instead of 0
func TestProposerSelection2(t *testing.T) {
cs1, vss := randConsensusState(4) // test needs more work for more than 3 validators
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
// this time we jump in at round 2
incrementRound(vss[1:]...)
incrementRound(vss[1:]...)
startTestRound(cs1, cs1.Height, 2)
<-newRoundCh // wait for the new round
// everyone just votes nil. we get a new proposer each round
for i := 0; i < len(vss); i++ {
prop := cs1.GetRoundState().Validators.GetProposer()
if !bytes.Equal(prop.Address, vss[(i+2)%len(vss)].GetAddress()) {
panic(cmn.Fmt("expected proposer to be validator %d. Got %X", (i+2)%len(vss), prop.Address))
}
rs := cs1.GetRoundState()
signAddVotes(cs1, types.VoteTypePrecommit, nil, rs.ProposalBlockParts.Header(), vss[1:]...)
<-newRoundCh // wait for the new round event each round
incrementRound(vss[1:]...)
}
}
// a non-validator should timeout into the prevote round
func TestEnterProposeNoPrivValidator(t *testing.T) {
cs, _ := randConsensusState(1)
cs.SetPrivValidator(nil)
height, round := cs.Height, cs.Round
// Listen for propose timeout event
timeoutCh := subscribe(cs.eventBus, types.EventQueryTimeoutPropose)
startTestRound(cs, height, round)
// if we're not a validator, EnterPropose should timeout
ticker := time.NewTicker(ensureProposeTimeout(cs.config.TimeoutPropose))
select {
case <-timeoutCh:
case <-ticker.C:
panic("Expected EnterPropose to timeout")
}
if cs.GetRoundState().Proposal != nil {
t.Error("Expected to make no proposal, since no privValidator")
}
}
// a validator should not timeout of the prevote round (TODO: unless the block is really big!)
func TestEnterProposeYesPrivValidator(t *testing.T) {
cs, _ := randConsensusState(1)
height, round := cs.Height, cs.Round
// Listen for propose timeout event
timeoutCh := subscribe(cs.eventBus, types.EventQueryTimeoutPropose)
proposalCh := subscribe(cs.eventBus, types.EventQueryCompleteProposal)
cs.enterNewRound(height, round)
cs.startRoutines(3)
<-proposalCh
// Check that Proposal, ProposalBlock, ProposalBlockParts are set.
rs := cs.GetRoundState()
if rs.Proposal == nil {
t.Error("rs.Proposal should be set")
}
if rs.ProposalBlock == nil {
t.Error("rs.ProposalBlock should be set")
}
if rs.ProposalBlockParts.Total() == 0 {
t.Error("rs.ProposalBlockParts should be set")
}
// if we're a validator, enterPropose should not timeout
ticker := time.NewTicker(ensureProposeTimeout(cs.config.TimeoutPropose))
select {
case <-timeoutCh:
panic("Expected EnterPropose not to timeout")
case <-ticker.C:
}
}
func TestBadProposal(t *testing.T) {
cs1, vss := randConsensusState(2)
height, round := cs1.Height, cs1.Round
vs2 := vss[1]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
voteCh := subscribe(cs1.eventBus, types.EventQueryVote)
propBlock, _ := cs1.createProposalBlock() //changeProposer(t, cs1, vs2)
// make the second validator the proposer by incrementing round
round = round + 1
incrementRound(vss[1:]...)
// make the block bad by tampering with statehash
stateHash := propBlock.AppHash
if len(stateHash) == 0 {
stateHash = make([]byte, 32)
}
stateHash[0] = byte((stateHash[0] + 1) % 255)
propBlock.AppHash = stateHash
propBlockParts := propBlock.MakePartSet(partSize)
proposal := types.NewProposal(vs2.Height, round, propBlockParts.Header(), -1, types.BlockID{})
if err := vs2.SignProposal(config.ChainID(), proposal); err != nil {
t.Fatal("failed to sign bad proposal", err)
}
// set the proposal block
if err := cs1.SetProposalAndBlock(proposal, propBlock, propBlockParts, "some peer"); err != nil {
t.Fatal(err)
}
// start the machine
startTestRound(cs1, height, round)
// wait for proposal
<-proposalCh
// wait for prevote
<-voteCh
validatePrevote(t, cs1, round, vss[0], nil)
// add bad prevote from vs2 and wait for it
signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh
// wait for precommit
<-voteCh
validatePrecommit(t, cs1, round, 0, vss[0], nil, nil)
signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2)
}
//----------------------------------------------------------------------------------------------------
// FullRoundSuite
// propose, prevote, and precommit a block
func TestFullRound1(t *testing.T) {
cs, vss := randConsensusState(1)
height, round := cs.Height, cs.Round
// NOTE: buffer capacity of 0 ensures we can validate prevote and last commit
// before consensus can move to the next height (and cause a race condition)
cs.eventBus.Stop()
eventBus := types.NewEventBusWithBufferCapacity(0)
eventBus.SetLogger(log.TestingLogger().With("module", "events"))
cs.SetEventBus(eventBus)
eventBus.Start()
voteCh := subscribe(cs.eventBus, types.EventQueryVote)
propCh := subscribe(cs.eventBus, types.EventQueryCompleteProposal)
newRoundCh := subscribe(cs.eventBus, types.EventQueryNewRound)
startTestRound(cs, height, round)
<-newRoundCh
// grab proposal
re := <-propCh
propBlockHash := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState).ProposalBlock.Hash()
<-voteCh // wait for prevote
validatePrevote(t, cs, round, vss[0], propBlockHash)
<-voteCh // wait for precommit
// we're going to roll right into new height
<-newRoundCh
validateLastPrecommit(t, cs, vss[0], propBlockHash)
}
// nil is proposed, so prevote and precommit nil
func TestFullRoundNil(t *testing.T) {
cs, vss := randConsensusState(1)
height, round := cs.Height, cs.Round
voteCh := subscribe(cs.eventBus, types.EventQueryVote)
cs.enterPrevote(height, round)
cs.startRoutines(4)
<-voteCh // prevote
<-voteCh // precommit
// should prevote and precommit nil
validatePrevoteAndPrecommit(t, cs, round, 0, vss[0], nil, nil)
}
// run through propose, prevote, precommit commit with two validators
// where the first validator has to wait for votes from the second
func TestFullRound2(t *testing.T) {
cs1, vss := randConsensusState(2)
vs2 := vss[1]
height, round := cs1.Height, cs1.Round
voteCh := subscribe(cs1.eventBus, types.EventQueryVote)
newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlock)
// start round and wait for propose and prevote
startTestRound(cs1, height, round)
<-voteCh // prevote
// we should be stuck in limbo waiting for more prevotes
rs := cs1.GetRoundState()
propBlockHash, propPartsHeader := rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header()
// prevote arrives from vs2:
signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propPartsHeader, vs2)
<-voteCh
<-voteCh //precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 0, 0, vss[0], propBlockHash, propBlockHash)
// we should be stuck in limbo waiting for more precommits
// precommit arrives from vs2:
signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash, propPartsHeader, vs2)
<-voteCh
// wait to finish commit, propose in next height
<-newBlockCh
}
//------------------------------------------------------------------------------------------
// LockSuite
// two validators, 4 rounds.
// two vals take turns proposing. val1 locks on first one, precommits nil on everything else
func TestLockNoPOL(t *testing.T) {
cs1, vss := randConsensusState(2)
vs2 := vss[1]
height := cs1.Height
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
voteCh := subscribe(cs1.eventBus, types.EventQueryVote)
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
/*
Round1 (cs1, B) // B B // B B2
*/
// start round and wait for prevote
cs1.enterNewRound(height, 0)
cs1.startRoutines(0)
re := <-proposalCh
rs := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
theBlockHash := rs.ProposalBlock.Hash()
<-voteCh // prevote
// we should now be stuck in limbo forever, waiting for more prevotes
// prevote arrives from vs2:
signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2)
<-voteCh // prevote
<-voteCh // precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash)
// we should now be stuck in limbo forever, waiting for more precommits
// lets add one for a different block
// NOTE: in practice we should never get to a point where there are precommits for different blocks at the same round
hash := make([]byte, len(theBlockHash))
copy(hash, theBlockHash)
hash[0] = byte((hash[0] + 1) % 255)
signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh // precommit
// (note we're entering precommit for a second time this round)
// but with invalid args. then we enterPrecommitWait, and the timeout to new round
<-timeoutWaitCh
///
<-newRoundCh
t.Log("#### ONTO ROUND 1")
/*
Round2 (cs1, B) // B B2
*/
incrementRound(vs2)
// now we're on a new round and not the proposer, so wait for timeout
re = <-timeoutProposeCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
if rs.ProposalBlock != nil {
panic("Expected proposal block to be nil")
}
// wait to finish prevote
<-voteCh
// we should have prevoted our locked block
validatePrevote(t, cs1, 1, vss[0], rs.LockedBlock.Hash())
// add a conflicting prevote from the other validator
signAddVotes(cs1, types.VoteTypePrevote, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh
// now we're going to enter prevote again, but with invalid args
// and then prevote wait, which should timeout. then wait for precommit
<-timeoutWaitCh
<-voteCh // precommit
// the proposed block should still be locked and our precommit added
// we should precommit nil and be locked on the proposal
validatePrecommit(t, cs1, 1, 0, vss[0], nil, theBlockHash)
// add conflicting precommit from vs2
// NOTE: in practice we should never get to a point where there are precommits for different blocks at the same round
signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh
// (note we're entering precommit for a second time this round, but with invalid args
// then we enterPrecommitWait and timeout into NewRound
<-timeoutWaitCh
<-newRoundCh
t.Log("#### ONTO ROUND 2")
/*
Round3 (vs2, _) // B, B2
*/
incrementRound(vs2)
re = <-proposalCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
// now we're on a new round and are the proposer
if !bytes.Equal(rs.ProposalBlock.Hash(), rs.LockedBlock.Hash()) {
panic(cmn.Fmt("Expected proposal block to be locked block. Got %v, Expected %v", rs.ProposalBlock, rs.LockedBlock))
}
<-voteCh // prevote
validatePrevote(t, cs1, 2, vss[0], rs.LockedBlock.Hash())
signAddVotes(cs1, types.VoteTypePrevote, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh
<-timeoutWaitCh // prevote wait
<-voteCh // precommit
validatePrecommit(t, cs1, 2, 0, vss[0], nil, theBlockHash) // precommit nil but be locked on proposal
signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2) // NOTE: conflicting precommits at same height
<-voteCh
<-timeoutWaitCh
// before we time out into new round, set next proposal block
prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1)
if prop == nil || propBlock == nil {
t.Fatal("Failed to create proposal block with vs2")
}
incrementRound(vs2)
<-newRoundCh
t.Log("#### ONTO ROUND 3")
/*
Round4 (vs2, C) // B C // B C
*/
// now we're on a new round and not the proposer
// so set the proposal block
if err := cs1.SetProposalAndBlock(prop, propBlock, propBlock.MakePartSet(partSize), ""); err != nil {
t.Fatal(err)
}
<-proposalCh
<-voteCh // prevote
// prevote for locked block (not proposal)
validatePrevote(t, cs1, 0, vss[0], cs1.LockedBlock.Hash())
signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2)
<-voteCh
<-timeoutWaitCh
<-voteCh
validatePrecommit(t, cs1, 2, 0, vss[0], nil, theBlockHash) // precommit nil but locked on proposal
signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2) // NOTE: conflicting precommits at same height
<-voteCh
}
// 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka
func TestLockPOLRelock(t *testing.T) {
cs1, vss := randConsensusState(4)
vs2, vs3, vs4 := vss[1], vss[2], vss[3]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
voteCh := subscribe(cs1.eventBus, types.EventQueryVote)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlockHeader)
// everything done from perspective of cs1
/*
Round1 (cs1, B) // B B B B// B nil B nil
eg. vs2 and vs4 didn't see the 2/3 prevotes
*/
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
rs := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
theBlockHash := rs.ProposalBlock.Hash()
<-voteCh // prevote
signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2, vs3, vs4)
// prevotes
discardFromChan(voteCh, 3)
<-voteCh // our precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash)
// add precommits from the rest
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4)
signAddVotes(cs1, types.VoteTypePrecommit, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs3)
// precommites
discardFromChan(voteCh, 3)
// before we timeout to the new round set the new proposal
prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1)
propBlockParts := propBlock.MakePartSet(partSize)
propBlockHash := propBlock.Hash()
incrementRound(vs2, vs3, vs4)
// timeout to new round
<-timeoutWaitCh
//XXX: this isnt guaranteed to get there before the timeoutPropose ...
if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil {
t.Fatal(err)
}
<-newRoundCh
t.Log("### ONTO ROUND 1")
/*
Round2 (vs2, C) // B C C C // C C C _)
cs1 changes lock!
*/
// now we're on a new round and not the proposer
// but we should receive the proposal
select {
case <-proposalCh:
case <-timeoutProposeCh:
<-proposalCh
}
// go to prevote, prevote for locked block (not proposal), move on
<-voteCh
validatePrevote(t, cs1, 0, vss[0], theBlockHash)
// now lets add prevotes from everyone else for the new block
signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propBlockParts.Header(), vs2, vs3, vs4)
// prevotes
discardFromChan(voteCh, 3)
// now either we go to PrevoteWait or Precommit
select {
case <-timeoutWaitCh: // we're in PrevoteWait, go to Precommit
// XXX: there's no guarantee we see the polka, this might be a precommit for nil,
// in which case the test fails!
<-voteCh
case <-voteCh: // we went straight to Precommit
}
// we should have unlocked and locked on the new block
validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash, propBlockHash)
signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash, propBlockParts.Header(), vs2, vs3)
discardFromChan(voteCh, 2)
be := <-newBlockCh
b := be.(types.TMEventData).Unwrap().(types.EventDataNewBlockHeader)
re = <-newRoundCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
if rs.Height != 2 {
panic("Expected height to increment")
}
if !bytes.Equal(b.Header.Hash(), propBlockHash) {
panic("Expected new block to be proposal block")
}
}
// 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka
func TestLockPOLUnlock(t *testing.T) {
cs1, vss := randConsensusState(4)
vs2, vs3, vs4 := vss[1], vss[2], vss[3]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
unlockCh := subscribe(cs1.eventBus, types.EventQueryUnlock)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// everything done from perspective of cs1
/*
Round1 (cs1, B) // B B B B // B nil B nil
eg. didn't see the 2/3 prevotes
*/
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
rs := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
theBlockHash := rs.ProposalBlock.Hash()
<-voteCh // prevote
signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2, vs3, vs4)
<-voteCh //precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash)
rs = cs1.GetRoundState()
// add precommits from the rest
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4)
signAddVotes(cs1, types.VoteTypePrecommit, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs3)
// before we time out into new round, set next proposal block
prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1)
propBlockParts := propBlock.MakePartSet(partSize)
incrementRound(vs2, vs3, vs4)
// timeout to new round
re = <-timeoutWaitCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
lockedBlockHash := rs.LockedBlock.Hash()
//XXX: this isnt guaranteed to get there before the timeoutPropose ...
if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil {
t.Fatal(err)
}
<-newRoundCh
t.Log("#### ONTO ROUND 1")
/*
Round2 (vs2, C) // B nil nil nil // nil nil nil _
cs1 unlocks!
*/
// now we're on a new round and not the proposer,
// but we should receive the proposal
select {
case <-proposalCh:
case <-timeoutProposeCh:
<-proposalCh
}
// go to prevote, prevote for locked block (not proposal)
<-voteCh
validatePrevote(t, cs1, 0, vss[0], lockedBlockHash)
// now lets add prevotes from everyone else for nil (a polka!)
signAddVotes(cs1, types.VoteTypePrevote, nil, types.PartSetHeader{}, vs2, vs3, vs4)
// the polka makes us unlock and precommit nil
<-unlockCh
<-voteCh // precommit
// we should have unlocked and committed nil
// NOTE: since we don't relock on nil, the lock round is 0
validatePrecommit(t, cs1, 1, 0, vss[0], nil, nil)
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3)
<-newRoundCh
}
// 4 vals
// a polka at round 1 but we miss it
// then a polka at round 2 that we lock on
// then we see the polka from round 1 but shouldn't unlock
func TestLockPOLSafety1(t *testing.T) {
cs1, vss := randConsensusState(4)
vs2, vs3, vs4 := vss[1], vss[2], vss[3]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
rs := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
propBlock := rs.ProposalBlock
<-voteCh // prevote
validatePrevote(t, cs1, 0, vss[0], propBlock.Hash())
// the others sign a polka but we don't see it
prevotes := signVotes(types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2, vs3, vs4)
// before we time out into new round, set next proposer
// and next proposal block
/*
_, v1 := cs1.Validators.GetByAddress(vss[0].Address)
v1.VotingPower = 1
if updated := cs1.Validators.Update(v1); !updated {
panic("failed to update validator")
}*/
t.Logf("old prop hash %v", fmt.Sprintf("%X", propBlock.Hash()))
// we do see them precommit nil
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3, vs4)
prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1)
propBlockHash := propBlock.Hash()
propBlockParts := propBlock.MakePartSet(partSize)
incrementRound(vs2, vs3, vs4)
//XXX: this isnt guaranteed to get there before the timeoutPropose ...
if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil {
t.Fatal(err)
}
<-newRoundCh
t.Log("### ONTO ROUND 1")
/*Round2
// we timeout and prevote our lock
// a polka happened but we didn't see it!
*/
// now we're on a new round and not the proposer,
// but we should receive the proposal
select {
case re = <-proposalCh:
case <-timeoutProposeCh:
re = <-proposalCh
}
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
if rs.LockedBlock != nil {
panic("we should not be locked!")
}
t.Logf("new prop hash %v", fmt.Sprintf("%X", propBlockHash))
// go to prevote, prevote for proposal block
<-voteCh
validatePrevote(t, cs1, 1, vss[0], propBlockHash)
// now we see the others prevote for it, so we should lock on it
signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propBlockParts.Header(), vs2, vs3, vs4)
<-voteCh // precommit
// we should have precommitted
validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash, propBlockHash)
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3)
<-timeoutWaitCh
incrementRound(vs2, vs3, vs4)
<-newRoundCh
t.Log("### ONTO ROUND 2")
/*Round3
we see the polka from round 1 but we shouldn't unlock!
*/
// timeout of propose
<-timeoutProposeCh
// finish prevote
<-voteCh
// we should prevote what we're locked on
validatePrevote(t, cs1, 2, vss[0], propBlockHash)
newStepCh := subscribe(cs1.eventBus, types.EventQueryNewRoundStep)
// add prevotes from the earlier round
addVotes(cs1, prevotes...)
t.Log("Done adding prevotes!")
ensureNoNewStep(newStepCh)
}
// 4 vals.
// polka P0 at R0, P1 at R1, and P2 at R2,
// we lock on P0 at R0, don't see P1, and unlock using P2 at R2
// then we should make sure we don't lock using P1
// What we want:
// dont see P0, lock on P1 at R1, dont unlock using P0 at R2
func TestLockPOLSafety2(t *testing.T) {
cs1, vss := randConsensusState(4)
vs2, vs3, vs4 := vss[1], vss[2], vss[3]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
unlockCh := subscribe(cs1.eventBus, types.EventQueryUnlock)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// the block for R0: gets polkad but we miss it
// (even though we signed it, shhh)
_, propBlock0 := decideProposal(cs1, vss[0], cs1.Height, cs1.Round)
propBlockHash0 := propBlock0.Hash()
propBlockParts0 := propBlock0.MakePartSet(partSize)
// the others sign a polka but we don't see it
prevotes := signVotes(types.VoteTypePrevote, propBlockHash0, propBlockParts0.Header(), vs2, vs3, vs4)
// the block for round 1
prop1, propBlock1 := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1)
propBlockHash1 := propBlock1.Hash()
propBlockParts1 := propBlock1.MakePartSet(partSize)
propBlockID1 := types.BlockID{propBlockHash1, propBlockParts1.Header()}
incrementRound(vs2, vs3, vs4)
cs1.updateRoundStep(0, cstypes.RoundStepPrecommitWait)
t.Log("### ONTO Round 1")
// jump in at round 1
height := cs1.Height
startTestRound(cs1, height, 1)
<-newRoundCh
if err := cs1.SetProposalAndBlock(prop1, propBlock1, propBlockParts1, "some peer"); err != nil {
t.Fatal(err)
}
<-proposalCh
<-voteCh // prevote
signAddVotes(cs1, types.VoteTypePrevote, propBlockHash1, propBlockParts1.Header(), vs2, vs3, vs4)
<-voteCh // precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash1, propBlockHash1)
// add precommits from the rest
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4)
signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash1, propBlockParts1.Header(), vs3)
incrementRound(vs2, vs3, vs4)
// timeout of precommit wait to new round
<-timeoutWaitCh
// in round 2 we see the polkad block from round 0
newProp := types.NewProposal(height, 2, propBlockParts0.Header(), 0, propBlockID1)
if err := vs3.SignProposal(config.ChainID(), newProp); err != nil {
t.Fatal(err)
}
if err := cs1.SetProposalAndBlock(newProp, propBlock0, propBlockParts0, "some peer"); err != nil {
t.Fatal(err)
}
// Add the pol votes
addVotes(cs1, prevotes...)
<-newRoundCh
t.Log("### ONTO Round 2")
/*Round2
// now we see the polka from round 1, but we shouldnt unlock
*/
select {
case <-timeoutProposeCh:
<-proposalCh
case <-proposalCh:
}
select {
case <-unlockCh:
panic("validator unlocked using an old polka")
case <-voteCh:
// prevote our locked block
}
validatePrevote(t, cs1, 2, vss[0], propBlockHash1)
}
//------------------------------------------------------------------------------------------
// SlashingSuite
// TODO: Slashing
/*
func TestSlashingPrevotes(t *testing.T) {
cs1, vss := randConsensusState(2)
vs2 := vss[1]
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
<-voteCh // prevote
rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
// we should now be stuck in limbo forever, waiting for more prevotes
// add one for a different block should cause us to go into prevote wait
hash := rs.ProposalBlock.Hash()
hash[0] = byte(hash[0]+1) % 255
signAddVotes(cs1, types.VoteTypePrevote, hash, rs.ProposalBlockParts.Header(), vs2)
<-timeoutWaitCh
// NOTE: we have to send the vote for different block first so we don't just go into precommit round right
// away and ignore more prevotes (and thus fail to slash!)
// add the conflicting vote
signAddVotes(cs1, types.VoteTypePrevote, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2)
// XXX: Check for existence of Dupeout info
}
func TestSlashingPrecommits(t *testing.T) {
cs1, vss := randConsensusState(2)
vs2 := vss[1]
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
<-voteCh // prevote
// add prevote from vs2
signAddVotes(cs1, types.VoteTypePrevote, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2)
<-voteCh // precommit
// we should now be stuck in limbo forever, waiting for more prevotes
// add one for a different block should cause us to go into prevote wait
hash := rs.ProposalBlock.Hash()
hash[0] = byte(hash[0]+1) % 255
signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlockParts.Header(), vs2)
// NOTE: we have to send the vote for different block first so we don't just go into precommit round right
// away and ignore more prevotes (and thus fail to slash!)
// add precommit from vs2
signAddVotes(cs1, types.VoteTypePrecommit, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2)
// XXX: Check for existence of Dupeout info
}
*/
//------------------------------------------------------------------------------------------
// CatchupSuite
//------------------------------------------------------------------------------------------
// HaltSuite
// 4 vals.
// we receive a final precommit after going into next round, but others might have gone to commit already!
func TestHalt1(t *testing.T) {
cs1, vss := randConsensusState(4)
vs2, vs3, vs4 := vss[1], vss[2], vss[3]
partSize := cs1.state.ConsensusParams.BlockPartSizeBytes
proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal)
timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait)
newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound)
newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlock)
voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress())
// start round and wait for propose and prevote
startTestRound(cs1, cs1.Height, 0)
<-newRoundCh
re := <-proposalCh
rs := re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
propBlock := rs.ProposalBlock
propBlockParts := propBlock.MakePartSet(partSize)
<-voteCh // prevote
signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlockParts.Header(), vs3, vs4)
<-voteCh // precommit
// the proposed block should now be locked and our precommit added
validatePrecommit(t, cs1, 0, 0, vss[0], propBlock.Hash(), propBlock.Hash())
// add precommits from the rest
signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2) // didnt receive proposal
signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlockParts.Header(), vs3)
// we receive this later, but vs3 might receive it earlier and with ours will go to commit!
precommit4 := signVote(vs4, types.VoteTypePrecommit, propBlock.Hash(), propBlockParts.Header())
incrementRound(vs2, vs3, vs4)
// timeout to new round
<-timeoutWaitCh
re = <-newRoundCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
t.Log("### ONTO ROUND 1")
/*Round2
// we timeout and prevote our lock
// a polka happened but we didn't see it!
*/
// go to prevote, prevote for locked block
<-voteCh // prevote
validatePrevote(t, cs1, 0, vss[0], rs.LockedBlock.Hash())
// now we receive the precommit from the previous round
addVotes(cs1, precommit4)
// receiving that precommit should take us straight to commit
<-newBlockCh
re = <-newRoundCh
rs = re.(types.TMEventData).Unwrap().(types.EventDataRoundState).RoundState.(*cstypes.RoundState)
if rs.Height != 2 {
panic("expected height to increment")
}
}
// subscribe subscribes test client to the given query and returns a channel with cap = 1.
func subscribe(eventBus *types.EventBus, q tmpubsub.Query) <-chan interface{} {
out := make(chan interface{}, 1)
err := eventBus.Subscribe(context.Background(), testSubscriber, q, out)
if err != nil {
panic(fmt.Sprintf("failed to subscribe %s to %v", testSubscriber, q))
}
return out
}
// discardFromChan reads n values from the channel.
func discardFromChan(ch <-chan interface{}, n int) {
for i := 0; i < n; i++ {
<-ch
}
}