zolfa
/
tendermint


								#======================== Journalbeat Configuration ============================


								journalbeat:

								  # What position in journald to seek to at start up

								  # options: cursor, tail, head (defaults to tail)

								  #seek_position: tail


								  # If seek_position is set to cursor and seeking to cursor fails

								  # fall back to this method.  If set to none will it will exit

								  # options: tail, head, none (defaults to tail)

								  #cursor_seek_fallback: tail


								  # Store the cursor of the successfully published events

								  #write_cursor_state: true


								  # Path to the file to store the cursor (defaults to ".journalbeat-cursor-state")

								  #cursor_state_file: .journalbeat-cursor-state


								  # How frequently should we save the cursor to disk (defaults to 5s)

								  #cursor_flush_period: 5s


								  # Path to the file to store the queue of events pending (defaults to ".journalbeat-pending-queue")

								  #pending_queue.file: .journalbeat-pending-queue


								  # How frequently should we save the queue to disk (defaults to 1s).

								  # Pending queue represents the WAL of events queued to be published

								  # or being published and waiting for acknowledgement. In case of a

								  # regular restart of journalbeat all the events not yet acknowledged

								  # will be flushed to disk during the shutdown.

								  # In case of disaster most probably journalbeat won't get a chance to shutdown

								  # itself gracefully and this flush period option will serve you as a

								  # backup creation frequency option.

								  #pending_queue.flush_period: 1s


								  # Lowercase and remove leading underscores, e.g. "_MESSAGE" -> "message"

								  # (defaults to false)

								  #clean_field_names: false


								  # All journal entries are strings by default. You can try to convert them to numbers.

								  # (defaults to false)

								  #convert_to_numbers: false


								  # Store all the fields of the Systemd Journal entry under this field

								  # Can be almost any string suitable to be a field name of an ElasticSearch document.

								  # Dots can be used to create nested fields.

								  # Two exceptions:

								  #  - no repeated dots;

								  #  - no trailing dots, e.g. "journal..field_name." will fail

								  # (defaults to "" hence stores on the upper level of the event)

								  #move_metadata_to_field: ""


								  # Specific units to monitor.

								  units: ["{{service}}.service"]


								  # Specify Journal paths to open. You can pass an array of paths to Systemd Journal paths.

								  # If you want to open Journal from directory just pass an array consisting of one element

								  # representing the path. See: https://www.freedesktop.org/software/systemd/man/sd_journal_open.html

								  # By default this setting is empty thus journalbeat will attempt to find all journal files automatically

								  #journal_paths: ["/var/log/journal"]


								  #default_type: journal


								#================================ General ======================================


								# The name of the shipper that publishes the network data. It can be used to group

								# all the transactions sent by a single shipper in the web interface.

								# If this options is not defined, the hostname is used.

								#name: journalbeat


								# The tags of the shipper are included in their own field with each

								# transaction published. Tags make it easy to group servers by different

								# logical properties.

								tags: ["{{service}}"]


								# Optional fields that you can specify to add additional information to the

								# output. Fields can be scalar values, arrays, dictionaries, or any nested

								# combination of these.

								fields:

								  logzio_codec: plain

								  token: {{LOGZIO_TOKEN}}


								# If this option is set to true, the custom fields are stored as top-level

								# fields in the output document instead of being grouped under a fields

								# sub-dictionary. Default is false.

								fields_under_root: true


								# Internal queue size for single events in processing pipeline

								#queue_size: 1000


								# The internal queue size for bulk events in the processing pipeline.

								# Do not modify this value.

								#bulk_queue_size: 0


								# Sets the maximum number of CPUs that can be executing simultaneously. The

								# default is the number of logical CPUs available in the system.

								#max_procs:


								#================================ Processors ===================================


								# Processors are used to reduce the number of fields in the exported event or to

								# enhance the event with external metadata. This section defines a list of

								# processors that are applied one by one and the first one receives the initial

								# event:

								#

								#   event -> filter1 -> event1 -> filter2 ->event2 ...

								#

								# The supported processors are drop_fields, drop_event, include_fields, and

								# add_cloud_metadata.

								#

								# For example, you can use the following processors to keep the fields that

								# contain CPU load percentages, but remove the fields that contain CPU ticks

								# values:

								#

								processors:

								#- include_fields:

								#    fields: ["cpu"]

								- drop_fields:

								    fields: ["beat.name", "beat.version", "logzio_codec", "SYSLOG_IDENTIFIER", "SYSLOG_FACILITY", "PRIORITY"]

								#

								# The following example drops the events that have the HTTP response code 200:

								#

								#processors:

								#- drop_event:

								#    when:

								#       equals:

								#           http.code: 200

								#

								# The following example enriches each event with metadata from the cloud

								# provider about the host machine. It works on EC2, GCE, and DigitalOcean.

								#

								#processors:

								#- add_cloud_metadata:

								#


								#================================ Outputs ======================================


								# Configure what outputs to use when sending the data collected by the beat.

								# Multiple outputs may be used.


								#----------------------------- Logstash output ---------------------------------

								output.logstash:

								  # Boolean flag to enable or disable the output module.

								  enabled: true


								  # The Logstash hosts

								  hosts: ["listener.logz.io:5015"]


								  # Number of workers per Logstash host.

								  #worker: 1


								  # Set gzip compression level.

								  #compression_level: 3


								  # Optional load balance the events between the Logstash hosts

								  #loadbalance: true


								  # Number of batches to be send asynchronously to logstash while processing

								  # new batches.

								  #pipelining: 0


								  # Optional index name. The default index name is set to name of the beat

								  # in all lowercase.

								  #index: 'beatname'


								  # SOCKS5 proxy server URL

								  #proxy_url: socks5://user:password@socks5-server:2233


								  # Resolve names locally when using a proxy server. Defaults to false.

								  #proxy_use_local_resolver: false


								  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.

								  ssl.enabled: true


								  # Configure SSL verification mode. If `none` is configured, all server hosts

								  # and certificates will be accepted. In this mode, SSL based connections are

								  # susceptible to man-in-the-middle attacks. Use only for testing. Default is

								  # `full`.

								  ssl.verification_mode: full


								  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to

								  # 1.2 are enabled.

								  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]


								  # Optional SSL configuration options. SSL is off by default.

								  # List of root certificates for HTTPS server verifications

								  ssl.certificate_authorities: ["/etc/pki/tls/certs/COMODORSADomainValidationSecureServerCA.crt"]


								  # Certificate for SSL client authentication

								  #ssl.certificate: "/etc/pki/client/cert.pem"


								  # Client Certificate Key

								  #ssl.key: "/etc/pki/client/cert.key"


								  # Optional passphrase for decrypting the Certificate Key.

								  #ssl.key_passphrase: ''


								  # Configure cipher suites to be used for SSL connections

								  #ssl.cipher_suites: []


								  # Configure curve types for ECDHE based cipher suites

								  #ssl.curve_types: []


								#------------------------------- File output -----------------------------------

								#output.file:

								  # Boolean flag to enable or disable the output module.

								  #enabled: true


								  # Path to the directory where to save the generated files. The option is

								  # mandatory.

								  #path: "/tmp/beatname"


								  # Name of the generated files. The default is `beatname` and it generates

								  # files: `beatname`, `beatname.1`, `beatname.2`, etc.

								  #filename: beatname


								  # Maximum size in kilobytes of each file. When this size is reached, and on

								  # every beatname restart, the files are rotated. The default value is 10240

								  # kB.

								  #rotate_every_kb: 10000


								  # Maximum number of files under path. When this number of files is reached,

								  # the oldest file is deleted and the rest are shifted from last to first. The

								  # default is 7 files.

								  #number_of_files: 7


								#----------------------------- Console output ---------------------------------

								#output.console:

								  # Boolean flag to enable or disable the output module.

								  #enabled: true


								  # Pretty print json event

								  #pretty: false


								#================================= Paths ======================================


								# The home path for the beatname installation. This is the default base path

								# for all other path settings and for miscellaneous files that come with the

								# distribution (for example, the sample dashboards).

								# If not set by a CLI flag or in the configuration file, the default for the

								# home path is the location of the binary.

								#path.home:


								# The configuration path for the beatname installation. This is the default

								# base path for configuration files, including the main YAML configuration file

								# and the Elasticsearch template file. If not set by a CLI flag or in the

								# configuration file, the default for the configuration path is the home path.

								#path.config: ${path.home}


								# The data path for the beatname installation. This is the default base path

								# for all the files in which beatname needs to store its data. If not set by a

								# CLI flag or in the configuration file, the default for the data path is a data

								# subdirectory inside the home path.

								#path.data: ${path.home}/data


								# The logs path for a beatname installation. This is the default location for

								# the Beat's log files. If not set by a CLI flag or in the configuration file,

								# the default for the logs path is a logs subdirectory inside the home path.

								#path.logs: ${path.home}/logs


								#============================== Dashboards =====================================

								# These settings control loading the sample dashboards to the Kibana index. Loading

								# the dashboards is disabled by default and can be enabled either by setting the

								# options here, or by using the `-setup` CLI flag.

								#dashboards.enabled: false


								# The URL from where to download the dashboards archive. By default this URL

								# has a value which is computed based on the Beat name and version. For released

								# versions, this URL points to the dashboard archive on the artifacts.elastic.co

								# website.

								#dashboards.url:


								# The directory from where to read the dashboards. It is used instead of the URL

								# when it has a value.

								#dashboards.directory:


								# The file archive (zip file) from where to read the dashboards. It is used instead

								# of the URL when it has a value.

								#dashboards.file:


								# If this option is enabled, the snapshot URL is used instead of the default URL.

								#dashboards.snapshot: false


								# The URL from where to download the snapshot version of the dashboards. By default

								# this has a value which is computed based on the Beat name and version.

								#dashboards.snapshot_url


								# In case the archive contains the dashboards from multiple Beats, this lets you

								# select which one to load. You can load all the dashboards in the archive by

								# setting this to the empty string.

								#dashboards.beat: beatname


								# The name of the Kibana index to use for setting the configuration. Default is ".kibana"

								#dashboards.kibana_index: .kibana


								# The Elasticsearch index name. This overwrites the index name defined in the

								# dashboards and index pattern. Example: testbeat-*

								#dashboards.index:


								#================================ Logging ======================================

								# There are three options for the log output: syslog, file, stderr.

								# Under Windows systems, the log files are per default sent to the file output,

								# under all other system per default to syslog.


								# Sets log level. The default log level is info.

								# Available log levels are: critical, error, warning, info, debug

								#logging.level: info


								# Enable debug output for selected components. To enable all selectors use ["*"]

								# Other available selectors are "beat", "publish", "service"

								# Multiple selectors can be chained.

								#logging.selectors: [ ]


								# Send all logging output to syslog. The default is false.

								#logging.to_syslog: true


								# If enabled, beatname periodically logs its internal metrics that have changed

								# in the last period. For each metric that changed, the delta from the value at

								# the beginning of the period is logged. Also, the total values for

								# all non-zero internal metrics are logged on shutdown. The default is true.

								#logging.metrics.enabled: true


								# The period after which to log the internal metrics. The default is 30s.

								#logging.metrics.period: 30s


								# Logging to rotating files files. Set logging.to_files to false to disable logging to

								# files.

								logging.to_files: true

								logging.files:

								  # Configure the path where the logs are written. The default is the logs directory

								  # under the home path (the binary location).

								  #path: /var/log/beatname


								  # The name of the files where the logs are written to.

								  #name: beatname


								  # Configure log file size limit. If limit is reached, log file will be

								  # automatically rotated

								  #rotateeverybytes: 10485760 # = 10MB


								  # Number of rotated log files to keep. Oldest files will be deleted first.

								  #keepfiles: 7