# Consensus Reactor Consensus Reactor defines a reactor for the consensus service. It contains the ConsensusState service that manages the state of the Tendermint consensus internal state machine. When Consensus Reactor is started, it starts Broadcast Routine which starts ConsensusState service. Furthermore, for each peer that is added to the Consensus Reactor, it creates (and manages) the known peer state (that is used extensively in gossip routines) and starts the following three routines for the peer p: Gossip Data Routine, Gossip Votes Routine and QueryMaj23Routine. Finally, Consensus Reactor is responsible for decoding messages received from a peer and for adequate processing of the message depending on its type and content. The processing normally consists of updating the known peer state and for some messages (`ProposalMessage`, `BlockPartMessage` and `VoteMessage`) also forwarding message to ConsensusState module for further processing. In the following text we specify the core functionality of those separate unit of executions that are part of the Consensus Reactor. ## ConsensusState service Consensus State handles execution of the Tendermint BFT consensus algorithm. It processes votes and proposals, and upon reaching agreement, commits blocks to the chain and executes them against the application. The internal state machine receives input from peers, the internal validator and from a timer. Inside Consensus State we have the following units of execution: Timeout Ticker and Receive Routine. Timeout Ticker is a timer that schedules timeouts conditional on the height/round/step that are processed by the Receive Routine. ### Receive Routine of the ConsensusState service Receive Routine of the ConsensusState handles messages which may cause internal consensus state transitions. It is the only routine that updates RoundState that contains internal consensus state. Updates (state transitions) happen on timeouts, complete proposals, and 2/3 majorities. It receives messages from peers, internal validators and from Timeout Ticker and invokes the corresponding handlers, potentially updating the RoundState. The details of the protocol (together with formal proofs of correctness) implemented by the Receive Routine are discussed in separate document. For understanding of this document it is sufficient to understand that the Receive Routine manages and updates RoundState data structure that is then extensively used by the gossip routines to determine what information should be sent to peer processes. ## Round State RoundState defines the internal consensus state. It contains height, round, round step, a current validator set, a proposal and proposal block for the current round, locked round and block (if some block is being locked), set of received votes and last commit and last validators set. ```golang type RoundState struct { Height int64 Round int Step RoundStepType Validators ValidatorSet Proposal Proposal ProposalBlock Block ProposalBlockParts PartSet LockedRound int LockedBlock Block LockedBlockParts PartSet Votes HeightVoteSet LastCommit VoteSet LastValidators ValidatorSet } ``` Internally, consensus will run as a state machine with the following states: - RoundStepNewHeight - RoundStepNewRound - RoundStepPropose - RoundStepProposeWait - RoundStepPrevote - RoundStepPrevoteWait - RoundStepPrecommit - RoundStepPrecommitWait - RoundStepCommit ## Peer Round State Peer round state contains the known state of a peer. It is being updated by the Receive routine of Consensus Reactor and by the gossip routines upon sending a message to the peer. ```golang type PeerRoundState struct { Height int64 // Height peer is at Round int // Round peer is at, -1 if unknown. Step RoundStepType // Step peer is at Proposal bool // True if peer has proposal for this round ProposalBlockPartsHeader PartSetHeader ProposalBlockParts BitArray ProposalPOLRound int // Proposal's POL round. -1 if none. ProposalPOL BitArray // nil until ProposalPOLMessage received. Prevotes BitArray // All votes peer has for this round Precommits BitArray // All precommits peer has for this round LastCommitRound int // Round of commit for last height. -1 if none. LastCommit BitArray // All commit precommits of commit for last height. CatchupCommitRound int // Round that we have commit for. Not necessarily unique. -1 if none. CatchupCommit BitArray // All commit precommits peer has for this height & CatchupCommitRound } ``` ## Receive method of Consensus reactor The entry point of the Consensus reactor is a receive method. When a message is received from a peer p, normally the peer round state is updated correspondingly, and some messages are passed for further processing, for example to ConsensusState service. We now specify the processing of messages in the receive method of Consensus reactor for each message type. In the following message handler, `rs` and `prs` denote `RoundState` and `PeerRoundState`, respectively. ### NewRoundStepMessage handler ``` handleMessage(msg): if msg is from smaller height/round/step then return // Just remember these values. prsHeight = prs.Height prsRound = prs.Round prsCatchupCommitRound = prs.CatchupCommitRound prsCatchupCommit = prs.CatchupCommit Update prs with values from msg if prs.Height or prs.Round has been updated then reset Proposal related fields of the peer state if prs.Round has been updated and msg.Round == prsCatchupCommitRound then prs.Precommits = psCatchupCommit if prs.Height has been updated then if prsHeight+1 == msg.Height && prsRound == msg.LastCommitRound then prs.LastCommitRound = msg.LastCommitRound prs.LastCommit = prs.Precommits } else { prs.LastCommitRound = msg.LastCommitRound prs.LastCommit = nil } Reset prs.CatchupCommitRound and prs.CatchupCommit ``` ### NewValidBlockMessage handler ``` handleMessage(msg): if prs.Height != msg.Height then return if prs.Round != msg.Round && !msg.IsCommit then return prs.ProposalBlockPartsHeader = msg.BlockPartsHeader prs.ProposalBlockParts = msg.BlockParts ``` ### HasVoteMessage handler ``` handleMessage(msg): if prs.Height == msg.Height then prs.setHasVote(msg.Height, msg.Round, msg.Type, msg.Index) ``` ### VoteSetMaj23Message handler ``` handleMessage(msg): if prs.Height == msg.Height then Record in rs that a peer claim to have ⅔ majority for msg.BlockID Send VoteSetBitsMessage showing votes node has for that BlockId ``` ### ProposalMessage handler ``` handleMessage(msg): if prs.Height != msg.Height || prs.Round != msg.Round || prs.Proposal then return prs.Proposal = true if prs.ProposalBlockParts == empty set then // otherwise it is set in NewValidBlockMessage handler prs.ProposalBlockPartsHeader = msg.BlockPartsHeader prs.ProposalPOLRound = msg.POLRound prs.ProposalPOL = nil Send msg through internal peerMsgQueue to ConsensusState service ``` ### ProposalPOLMessage handler ``` handleMessage(msg): if prs.Height != msg.Height or prs.ProposalPOLRound != msg.ProposalPOLRound then return prs.ProposalPOL = msg.ProposalPOL ``` ### BlockPartMessage handler ``` handleMessage(msg): if prs.Height != msg.Height || prs.Round != msg.Round then return Record in prs that peer has block part msg.Part.Index Send msg trough internal peerMsgQueue to ConsensusState service ``` ### VoteMessage handler ``` handleMessage(msg): Record in prs that a peer knows vote with index msg.vote.ValidatorIndex for particular height and round Send msg trough internal peerMsgQueue to ConsensusState service ``` ### VoteSetBitsMessage handler ``` handleMessage(msg): Update prs for the bit-array of votes peer claims to have for the msg.BlockID ``` ## Gossip Data Routine It is used to send the following messages to the peer: `BlockPartMessage`, `ProposalMessage` and `ProposalPOLMessage` on the DataChannel. The gossip data routine is based on the local RoundState (`rs`) and the known PeerRoundState (`prs`). The routine repeats forever the logic shown below: ``` 1a) if rs.ProposalBlockPartsHeader == prs.ProposalBlockPartsHeader and the peer does not have all the proposal parts then Part = pick a random proposal block part the peer does not have Send BlockPartMessage(rs.Height, rs.Round, Part) to the peer on the DataChannel if send returns true, record that the peer knows the corresponding block Part Continue 1b) if (0 < prs.Height) and (prs.Height < rs.Height) then help peer catch up using gossipDataForCatchup function Continue 1c) if (rs.Height != prs.Height) or (rs.Round != prs.Round) then Sleep PeerGossipSleepDuration Continue // at this point rs.Height == prs.Height and rs.Round == prs.Round 1d) if (rs.Proposal != nil and !prs.Proposal) then Send ProposalMessage(rs.Proposal) to the peer if send returns true, record that the peer knows Proposal if 0 <= rs.Proposal.POLRound then polRound = rs.Proposal.POLRound prevotesBitArray = rs.Votes.Prevotes(polRound).BitArray() Send ProposalPOLMessage(rs.Height, polRound, prevotesBitArray) Continue 2) Sleep PeerGossipSleepDuration ``` ### Gossip Data For Catchup This function is responsible for helping peer catch up if it is at the smaller height (prs.Height < rs.Height). The function executes the following logic: if peer does not have all block parts for prs.ProposalBlockPart then blockMeta = Load Block Metadata for height prs.Height from blockStore if (!blockMeta.BlockID.PartsHeader == prs.ProposalBlockPartsHeader) then Sleep PeerGossipSleepDuration return Part = pick a random proposal block part the peer does not have Send BlockPartMessage(prs.Height, prs.Round, Part) to the peer on the DataChannel if send returns true, record that the peer knows the corresponding block Part return else Sleep PeerGossipSleepDuration ## Gossip Votes Routine It is used to send the following message: `VoteMessage` on the VoteChannel. The gossip votes routine is based on the local RoundState (`rs`) and the known PeerRoundState (`prs`). The routine repeats forever the logic shown below: ``` 1a) if rs.Height == prs.Height then if prs.Step == RoundStepNewHeight then vote = random vote from rs.LastCommit the peer does not have Send VoteMessage(vote) to the peer if send returns true, continue if prs.Step <= RoundStepPrevote and prs.Round != -1 and prs.Round <= rs.Round then Prevotes = rs.Votes.Prevotes(prs.Round) vote = random vote from Prevotes the peer does not have Send VoteMessage(vote) to the peer if send returns true, continue if prs.Step <= RoundStepPrecommit and prs.Round != -1 and prs.Round <= rs.Round then Precommits = rs.Votes.Precommits(prs.Round) vote = random vote from Precommits the peer does not have Send VoteMessage(vote) to the peer if send returns true, continue if prs.ProposalPOLRound != -1 then PolPrevotes = rs.Votes.Prevotes(prs.ProposalPOLRound) vote = random vote from PolPrevotes the peer does not have Send VoteMessage(vote) to the peer if send returns true, continue 1b) if prs.Height != 0 and rs.Height == prs.Height+1 then vote = random vote from rs.LastCommit peer does not have Send VoteMessage(vote) to the peer if send returns true, continue 1c) if prs.Height != 0 and rs.Height >= prs.Height+2 then Commit = get commit from BlockStore for prs.Height vote = random vote from Commit the peer does not have Send VoteMessage(vote) to the peer if send returns true, continue 2) Sleep PeerGossipSleepDuration ``` ## QueryMaj23Routine It is used to send the following message: `VoteSetMaj23Message`. `VoteSetMaj23Message` is sent to indicate that a given BlockID has seen +2/3 votes. This routine is based on the local RoundState (`rs`) and the known PeerRoundState (`prs`). The routine repeats forever the logic shown below. ``` 1a) if rs.Height == prs.Height then Prevotes = rs.Votes.Prevotes(prs.Round) if there is a ⅔ majority for some blockId in Prevotes then m = VoteSetMaj23Message(prs.Height, prs.Round, Prevote, blockId) Send m to peer Sleep PeerQueryMaj23SleepDuration 1b) if rs.Height == prs.Height then Precommits = rs.Votes.Precommits(prs.Round) if there is a ⅔ majority for some blockId in Precommits then m = VoteSetMaj23Message(prs.Height,prs.Round,Precommit,blockId) Send m to peer Sleep PeerQueryMaj23SleepDuration 1c) if rs.Height == prs.Height and prs.ProposalPOLRound >= 0 then Prevotes = rs.Votes.Prevotes(prs.ProposalPOLRound) if there is a ⅔ majority for some blockId in Prevotes then m = VoteSetMaj23Message(prs.Height,prs.ProposalPOLRound,Prevotes,blockId) Send m to peer Sleep PeerQueryMaj23SleepDuration 1d) if prs.CatchupCommitRound != -1 and 0 < prs.Height and prs.Height <= blockStore.Height() then Commit = LoadCommit(prs.Height) m = VoteSetMaj23Message(prs.Height,Commit.Round,Precommit,Commit.blockId) Send m to peer Sleep PeerQueryMaj23SleepDuration 2) Sleep PeerQueryMaj23SleepDuration ``` ## Broadcast routine The Broadcast routine subscribes to an internal event bus to receive new round steps and votes messages, and broadcasts messages to peers upon receiving those events. It broadcasts `NewRoundStepMessage` or `CommitStepMessage` upon new round state event. Note that broadcasting these messages does not depend on the PeerRoundState; it is sent on the StateChannel. Upon receiving VoteMessage it broadcasts `HasVoteMessage` message to its peers on the StateChannel. ## Channels Defines 4 channels: state, data, vote and vote_set_bits. Each channel has `SendQueueCapacity` and `RecvBufferCapacity` and `RecvMessageCapacity` set to `maxMsgSize`. Sending incorrectly encoded data will result in stopping the peer.