package types import ( "bytes" "fmt" "strings" "sync" "github.com/pkg/errors" cmn "github.com/tendermint/tendermint/libs/common" ) const ( // MaxVotesCount is the maximum number of votes in a set. Used in ValidateBasic funcs for // protection against DOS attacks. Note this implies a corresponding equal limit to // the number of validators. MaxVotesCount = 10000 ) // UNSTABLE // XXX: duplicate of p2p.ID to avoid dependence between packages. // Perhaps we can have a minimal types package containing this (and other things?) // that both `types` and `p2p` import ? type P2PID string /* VoteSet helps collect signatures from validators at each height+round for a predefined vote type. We need VoteSet to be able to keep track of conflicting votes when validators double-sign. Yet, we can't keep track of *all* the votes seen, as that could be a DoS attack vector. There are two storage areas for votes. 1. voteSet.votes 2. voteSet.votesByBlock `.votes` is the "canonical" list of votes. It always has at least one vote, if a vote from a validator had been seen at all. Usually it keeps track of the first vote seen, but when a 2/3 majority is found, votes for that get priority and are copied over from `.votesByBlock`. `.votesByBlock` keeps track of a list of votes for a particular block. There are two ways a &blockVotes{} gets created in `.votesByBlock`. 1. the first vote seen by a validator was for the particular block. 2. a peer claims to have seen 2/3 majority for the particular block. Since the first vote from a validator will always get added in `.votesByBlock` , all votes in `.votes` will have a corresponding entry in `.votesByBlock`. When a &blockVotes{} in `.votesByBlock` reaches a 2/3 majority quorum, its votes are copied into `.votes`. All this is memory bounded because conflicting votes only get added if a peer told us to track that block, each peer only gets to tell us 1 such block, and, there's only a limited number of peers. NOTE: Assumes that the sum total of voting power does not exceed MaxUInt64. */ type VoteSet struct { chainID string height int64 round int signedMsgType SignedMsgType valSet *ValidatorSet mtx sync.Mutex votesBitArray *cmn.BitArray votes []*Vote // Primary votes to share sum int64 // Sum of voting power for seen votes, discounting conflicts maj23 *BlockID // First 2/3 majority seen votesByBlock map[string]*blockVotes // string(blockHash|blockParts) -> blockVotes peerMaj23s map[P2PID]BlockID // Maj23 for each peer } // Constructs a new VoteSet struct used to accumulate votes for given height/round. func NewVoteSet(chainID string, height int64, round int, signedMsgType SignedMsgType, valSet *ValidatorSet) *VoteSet { if height == 0 { panic("Cannot make VoteSet for height == 0, doesn't make sense.") } return &VoteSet{ chainID: chainID, height: height, round: round, signedMsgType: signedMsgType, valSet: valSet, votesBitArray: cmn.NewBitArray(valSet.Size()), votes: make([]*Vote, valSet.Size()), sum: 0, maj23: nil, votesByBlock: make(map[string]*blockVotes, valSet.Size()), peerMaj23s: make(map[P2PID]BlockID), } } func (voteSet *VoteSet) ChainID() string { return voteSet.chainID } // Implements VoteSetReader. func (voteSet *VoteSet) GetHeight() int64 { if voteSet == nil { return 0 } return voteSet.height } // Implements VoteSetReader. func (voteSet *VoteSet) GetRound() int { if voteSet == nil { return -1 } return voteSet.round } // Implements VoteSetReader. func (voteSet *VoteSet) Type() byte { if voteSet == nil { return 0x00 } return byte(voteSet.signedMsgType) } // Implements VoteSetReader. func (voteSet *VoteSet) Size() int { if voteSet == nil { return 0 } return voteSet.valSet.Size() } // Returns added=true if vote is valid and new. // Otherwise returns err=ErrVote[ // UnexpectedStep | InvalidIndex | InvalidAddress | // InvalidSignature | InvalidBlockHash | ConflictingVotes ] // Duplicate votes return added=false, err=nil. // Conflicting votes return added=*, err=ErrVoteConflictingVotes. // NOTE: vote should not be mutated after adding. // NOTE: VoteSet must not be nil // NOTE: Vote must not be nil func (voteSet *VoteSet) AddVote(vote *Vote) (added bool, err error) { if voteSet == nil { panic("AddVote() on nil VoteSet") } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.addVote(vote) } // NOTE: Validates as much as possible before attempting to verify the signature. func (voteSet *VoteSet) addVote(vote *Vote) (added bool, err error) { if vote == nil { return false, ErrVoteNil } valIndex := vote.ValidatorIndex valAddr := vote.ValidatorAddress blockKey := vote.BlockID.Key() // Ensure that validator index was set if valIndex < 0 { return false, errors.Wrap(ErrVoteInvalidValidatorIndex, "Index < 0") } else if len(valAddr) == 0 { return false, errors.Wrap(ErrVoteInvalidValidatorAddress, "Empty address") } // Make sure the step matches. if (vote.Height != voteSet.height) || (vote.Round != voteSet.round) || (vote.Type != voteSet.signedMsgType) { return false, errors.Wrapf(ErrVoteUnexpectedStep, "Expected %d/%d/%d, but got %d/%d/%d", voteSet.height, voteSet.round, voteSet.signedMsgType, vote.Height, vote.Round, vote.Type) } // Ensure that signer is a validator. lookupAddr, val := voteSet.valSet.GetByIndex(valIndex) if val == nil { return false, errors.Wrapf(ErrVoteInvalidValidatorIndex, "Cannot find validator %d in valSet of size %d", valIndex, voteSet.valSet.Size()) } // Ensure that the signer has the right address. if !bytes.Equal(valAddr, lookupAddr) { return false, errors.Wrapf(ErrVoteInvalidValidatorAddress, "vote.ValidatorAddress (%X) does not match address (%X) for vote.ValidatorIndex (%d)\n"+ "Ensure the genesis file is correct across all validators.", valAddr, lookupAddr, valIndex) } // If we already know of this vote, return false. if existing, ok := voteSet.getVote(valIndex, blockKey); ok { if bytes.Equal(existing.Signature, vote.Signature) { return false, nil // duplicate } return false, errors.Wrapf(ErrVoteNonDeterministicSignature, "Existing vote: %v; New vote: %v", existing, vote) } // Check signature. if err := vote.Verify(voteSet.chainID, val.PubKey); err != nil { return false, errors.Wrapf(err, "Failed to verify vote with ChainID %s and PubKey %s", voteSet.chainID, val.PubKey) } // Add vote and get conflicting vote if any. added, conflicting := voteSet.addVerifiedVote(vote, blockKey, val.VotingPower) if conflicting != nil { return added, NewConflictingVoteError(val, conflicting, vote) } if !added { panic("Expected to add non-conflicting vote") } return added, nil } // Returns (vote, true) if vote exists for valIndex and blockKey. func (voteSet *VoteSet) getVote(valIndex int, blockKey string) (vote *Vote, ok bool) { if existing := voteSet.votes[valIndex]; existing != nil && existing.BlockID.Key() == blockKey { return existing, true } if existing := voteSet.votesByBlock[blockKey].getByIndex(valIndex); existing != nil { return existing, true } return nil, false } // Assumes signature is valid. // If conflicting vote exists, returns it. func (voteSet *VoteSet) addVerifiedVote( vote *Vote, blockKey string, votingPower int64, ) (added bool, conflicting *Vote) { valIndex := vote.ValidatorIndex // Already exists in voteSet.votes? if existing := voteSet.votes[valIndex]; existing != nil { if existing.BlockID.Equals(vote.BlockID) { panic("addVerifiedVote does not expect duplicate votes") } else { conflicting = existing } // Replace vote if blockKey matches voteSet.maj23. if voteSet.maj23 != nil && voteSet.maj23.Key() == blockKey { voteSet.votes[valIndex] = vote voteSet.votesBitArray.SetIndex(valIndex, true) } // Otherwise don't add it to voteSet.votes } else { // Add to voteSet.votes and incr .sum voteSet.votes[valIndex] = vote voteSet.votesBitArray.SetIndex(valIndex, true) voteSet.sum += votingPower } votesByBlock, ok := voteSet.votesByBlock[blockKey] if ok { if conflicting != nil && !votesByBlock.peerMaj23 { // There's a conflict and no peer claims that this block is special. return false, conflicting } // We'll add the vote in a bit. } else { // .votesByBlock doesn't exist... if conflicting != nil { // ... and there's a conflicting vote. // We're not even tracking this blockKey, so just forget it. return false, conflicting } // ... and there's no conflicting vote. // Start tracking this blockKey votesByBlock = newBlockVotes(false, voteSet.valSet.Size()) voteSet.votesByBlock[blockKey] = votesByBlock // We'll add the vote in a bit. } // Before adding to votesByBlock, see if we'll exceed quorum origSum := votesByBlock.sum quorum := voteSet.valSet.TotalVotingPower()*2/3 + 1 // Add vote to votesByBlock votesByBlock.addVerifiedVote(vote, votingPower) // If we just crossed the quorum threshold and have 2/3 majority... if origSum < quorum && quorum <= votesByBlock.sum { // Only consider the first quorum reached if voteSet.maj23 == nil { maj23BlockID := vote.BlockID voteSet.maj23 = &maj23BlockID // And also copy votes over to voteSet.votes for i, vote := range votesByBlock.votes { if vote != nil { voteSet.votes[i] = vote } } } } return true, conflicting } // If a peer claims that it has 2/3 majority for given blockKey, call this. // NOTE: if there are too many peers, or too much peer churn, // this can cause memory issues. // TODO: implement ability to remove peers too // NOTE: VoteSet must not be nil func (voteSet *VoteSet) SetPeerMaj23(peerID P2PID, blockID BlockID) error { if voteSet == nil { panic("SetPeerMaj23() on nil VoteSet") } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() blockKey := blockID.Key() // Make sure peer hasn't already told us something. if existing, ok := voteSet.peerMaj23s[peerID]; ok { if existing.Equals(blockID) { return nil // Nothing to do } return fmt.Errorf("setPeerMaj23: Received conflicting blockID from peer %v. Got %v, expected %v", peerID, blockID, existing) } voteSet.peerMaj23s[peerID] = blockID // Create .votesByBlock entry if needed. votesByBlock, ok := voteSet.votesByBlock[blockKey] if ok { if votesByBlock.peerMaj23 { return nil // Nothing to do } votesByBlock.peerMaj23 = true // No need to copy votes, already there. } else { votesByBlock = newBlockVotes(true, voteSet.valSet.Size()) voteSet.votesByBlock[blockKey] = votesByBlock // No need to copy votes, no votes to copy over. } return nil } // Implements VoteSetReader. func (voteSet *VoteSet) BitArray() *cmn.BitArray { if voteSet == nil { return nil } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.votesBitArray.Copy() } func (voteSet *VoteSet) BitArrayByBlockID(blockID BlockID) *cmn.BitArray { if voteSet == nil { return nil } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() votesByBlock, ok := voteSet.votesByBlock[blockID.Key()] if ok { return votesByBlock.bitArray.Copy() } return nil } // NOTE: if validator has conflicting votes, returns "canonical" vote // Implements VoteSetReader. func (voteSet *VoteSet) GetByIndex(valIndex int) *Vote { if voteSet == nil { return nil } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.votes[valIndex] } func (voteSet *VoteSet) GetByAddress(address []byte) *Vote { if voteSet == nil { return nil } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() valIndex, val := voteSet.valSet.GetByAddress(address) if val == nil { panic("GetByAddress(address) returned nil") } return voteSet.votes[valIndex] } func (voteSet *VoteSet) HasTwoThirdsMajority() bool { if voteSet == nil { return false } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.maj23 != nil } // Implements VoteSetReader. func (voteSet *VoteSet) IsCommit() bool { if voteSet == nil { return false } if voteSet.signedMsgType != PrecommitType { return false } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.maj23 != nil } func (voteSet *VoteSet) HasTwoThirdsAny() bool { if voteSet == nil { return false } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.sum > voteSet.valSet.TotalVotingPower()*2/3 } func (voteSet *VoteSet) HasAll() bool { voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.sum == voteSet.valSet.TotalVotingPower() } // If there was a +2/3 majority for blockID, return blockID and true. // Else, return the empty BlockID{} and false. func (voteSet *VoteSet) TwoThirdsMajority() (blockID BlockID, ok bool) { if voteSet == nil { return BlockID{}, false } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() if voteSet.maj23 != nil { return *voteSet.maj23, true } return BlockID{}, false } //-------------------------------------------------------------------------------- // Strings and JSON func (voteSet *VoteSet) String() string { if voteSet == nil { return "nil-VoteSet" } return voteSet.StringIndented("") } func (voteSet *VoteSet) StringIndented(indent string) string { voteSet.mtx.Lock() defer voteSet.mtx.Unlock() voteStrings := make([]string, len(voteSet.votes)) for i, vote := range voteSet.votes { if vote == nil { voteStrings[i] = nilVoteStr } else { voteStrings[i] = vote.String() } } return fmt.Sprintf(`VoteSet{ %s H:%v R:%v T:%v %s %v %s %v %s %v %s}`, indent, voteSet.height, voteSet.round, voteSet.signedMsgType, indent, strings.Join(voteStrings, "\n"+indent+" "), indent, voteSet.votesBitArray, indent, voteSet.peerMaj23s, indent) } // Marshal the VoteSet to JSON. Same as String(), just in JSON, // and without the height/round/signedMsgType (since its already included in the votes). func (voteSet *VoteSet) MarshalJSON() ([]byte, error) { voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return cdc.MarshalJSON(VoteSetJSON{ voteSet.voteStrings(), voteSet.bitArrayString(), voteSet.peerMaj23s, }) } // More human readable JSON of the vote set // NOTE: insufficient for unmarshalling from (compressed votes) // TODO: make the peerMaj23s nicer to read (eg just the block hash) type VoteSetJSON struct { Votes []string `json:"votes"` VotesBitArray string `json:"votes_bit_array"` PeerMaj23s map[P2PID]BlockID `json:"peer_maj_23s"` } // Return the bit-array of votes including // the fraction of power that has voted like: // "BA{29:xx__x__x_x___x__x_______xxx__} 856/1304 = 0.66" func (voteSet *VoteSet) BitArrayString() string { voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.bitArrayString() } func (voteSet *VoteSet) bitArrayString() string { bAString := voteSet.votesBitArray.String() voted, total, fracVoted := voteSet.sumTotalFrac() return fmt.Sprintf("%s %d/%d = %.2f", bAString, voted, total, fracVoted) } // Returns a list of votes compressed to more readable strings. func (voteSet *VoteSet) VoteStrings() []string { voteSet.mtx.Lock() defer voteSet.mtx.Unlock() return voteSet.voteStrings() } func (voteSet *VoteSet) voteStrings() []string { voteStrings := make([]string, len(voteSet.votes)) for i, vote := range voteSet.votes { if vote == nil { voteStrings[i] = nilVoteStr } else { voteStrings[i] = vote.String() } } return voteStrings } func (voteSet *VoteSet) StringShort() string { if voteSet == nil { return "nil-VoteSet" } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() _, _, frac := voteSet.sumTotalFrac() return fmt.Sprintf(`VoteSet{H:%v R:%v T:%v +2/3:%v(%v) %v %v}`, voteSet.height, voteSet.round, voteSet.signedMsgType, voteSet.maj23, frac, voteSet.votesBitArray, voteSet.peerMaj23s) } // return the power voted, the total, and the fraction func (voteSet *VoteSet) sumTotalFrac() (int64, int64, float64) { voted, total := voteSet.sum, voteSet.valSet.TotalVotingPower() fracVoted := float64(voted) / float64(total) return voted, total, fracVoted } //-------------------------------------------------------------------------------- // Commit // MakeCommit constructs a Commit from the VoteSet. // Panics if the vote type is not PrecommitType or if // there's no +2/3 votes for a single block. func (voteSet *VoteSet) MakeCommit() *Commit { if voteSet.signedMsgType != PrecommitType { panic("Cannot MakeCommit() unless VoteSet.Type is PrecommitType") } voteSet.mtx.Lock() defer voteSet.mtx.Unlock() // Make sure we have a 2/3 majority if voteSet.maj23 == nil { panic("Cannot MakeCommit() unless a blockhash has +2/3") } // For every validator, get the precommit commitSigs := make([]CommitSig, len(voteSet.votes)) for i, v := range voteSet.votes { commitSigs[i] = v.CommitSig() } return NewCommit(voteSet.GetHeight(), voteSet.GetRound(), *voteSet.maj23, commitSigs) } //-------------------------------------------------------------------------------- /* Votes for a particular block There are two ways a *blockVotes gets created for a blockKey. 1. first (non-conflicting) vote of a validator w/ blockKey (peerMaj23=false) 2. A peer claims to have a 2/3 majority w/ blockKey (peerMaj23=true) */ type blockVotes struct { peerMaj23 bool // peer claims to have maj23 bitArray *cmn.BitArray // valIndex -> hasVote? votes []*Vote // valIndex -> *Vote sum int64 // vote sum } func newBlockVotes(peerMaj23 bool, numValidators int) *blockVotes { return &blockVotes{ peerMaj23: peerMaj23, bitArray: cmn.NewBitArray(numValidators), votes: make([]*Vote, numValidators), sum: 0, } } func (vs *blockVotes) addVerifiedVote(vote *Vote, votingPower int64) { valIndex := vote.ValidatorIndex if existing := vs.votes[valIndex]; existing == nil { vs.bitArray.SetIndex(valIndex, true) vs.votes[valIndex] = vote vs.sum += votingPower } } func (vs *blockVotes) getByIndex(index int) *Vote { if vs == nil { return nil } return vs.votes[index] } //-------------------------------------------------------------------------------- // Common interface between *consensus.VoteSet and types.Commit type VoteSetReader interface { GetHeight() int64 GetRound() int Type() byte Size() int BitArray() *cmn.BitArray GetByIndex(int) *Vote IsCommit() bool }