package p2p

import (
	"context"
	"errors"
	"fmt"
	"net"

	"github.com/tendermint/tendermint/crypto"
	"github.com/tendermint/tendermint/internal/p2p/conn"
	"github.com/tendermint/tendermint/types"
	"github.com/tendermint/tendermint/version"
)

//go:generate ../../scripts/mockery_generate.sh Transport|Connection

const (
	// defaultProtocol is the default protocol used for NodeAddress when
	// a protocol isn't explicitly given as a URL scheme.
	defaultProtocol Protocol = MConnProtocol
)

// defaultProtocolVersion populates the Block and P2P versions using
// the global values, but not the App.
var defaultProtocolVersion = types.ProtocolVersion{
	P2P:   version.P2PProtocol,
	Block: version.BlockProtocol,
	App:   0,
}

// Protocol identifies a transport protocol.
type Protocol string

// Transport is a connection-oriented mechanism for exchanging data with a peer.
type Transport interface {
	// Protocols returns the protocols supported by the transport. The Router
	// uses this to pick a transport for an Endpoint.
	Protocols() []Protocol

	// Endpoints returns the local endpoints the transport is listening on, if any.
	//
	// How to listen is transport-dependent, e.g. MConnTransport uses Listen() while
	// MemoryTransport starts listening via MemoryNetwork.CreateTransport().
	Endpoints() []Endpoint

	// Accept waits for the next inbound connection on a listening endpoint, blocking
	// until either a connection is available or the transport is closed. On closure,
	// io.EOF is returned and further Accept calls are futile.
	Accept() (Connection, error)

	// Dial creates an outbound connection to an endpoint.
	Dial(context.Context, Endpoint) (Connection, error)

	// Close stops accepting new connections, but does not close active connections.
	Close() error

	// Stringer is used to display the transport, e.g. in logs.
	//
	// Without this, the logger may use reflection to access and display
	// internal fields. These can be written to concurrently, which can trigger
	// the race detector or even cause a panic.
	fmt.Stringer
}

// Connection represents an established connection between two endpoints.
//
// FIXME: This is a temporary interface for backwards-compatibility with the
// current MConnection-protocol, which is message-oriented. It should be
// migrated to a byte-oriented multi-stream interface instead, which would allow
// e.g. adopting QUIC and making message framing, traffic scheduling, and node
// handshakes a Router concern shared across all transports. However, this
// requires MConnection protocol changes or a shim. For details, see:
// https://github.com/tendermint/spec/pull/227
//
// FIXME: The interface is currently very broad in order to accommodate
// MConnection behavior that the legacy P2P stack relies on. It should be
// cleaned up when the legacy stack is removed.
type Connection interface {
	// Handshake executes a node handshake with the remote peer. It must be
	// called immediately after the connection is established, and returns the
	// remote peer's node info and public key. The caller is responsible for
	// validation.
	//
	// FIXME: The handshake should really be the Router's responsibility, but
	// that requires the connection interface to be byte-oriented rather than
	// message-oriented (see comment above).
	Handshake(context.Context, types.NodeInfo, crypto.PrivKey) (types.NodeInfo, crypto.PubKey, error)

	// ReceiveMessage returns the next message received on the connection,
	// blocking until one is available. Returns io.EOF if closed.
	ReceiveMessage() (ChannelID, []byte, error)

	// SendMessage sends a message on the connection. Returns io.EOF if closed.
	//
	// FIXME: For compatibility with the legacy P2P stack, it returns an
	// additional boolean false if the message timed out waiting to be accepted
	// into the send buffer. This should be removed.
	SendMessage(ChannelID, []byte) (bool, error)

	// TrySendMessage is a non-blocking version of SendMessage that returns
	// immediately if the message buffer is full. It returns true if the message
	// was accepted.
	//
	// FIXME: This method is here for backwards-compatibility with the legacy
	// P2P stack and should be removed.
	TrySendMessage(ChannelID, []byte) (bool, error)

	// LocalEndpoint returns the local endpoint for the connection.
	LocalEndpoint() Endpoint

	// RemoteEndpoint returns the remote endpoint for the connection.
	RemoteEndpoint() Endpoint

	// Close closes the connection.
	Close() error

	// FlushClose flushes all pending sends and then closes the connection.
	//
	// FIXME: This only exists for backwards-compatibility with the current
	// MConnection implementation. There should really be a separate Flush()
	// method, but there is no easy way to synchronously flush pending data with
	// the current MConnection code.
	FlushClose() error

	// Status returns the current connection status.
	// FIXME: Only here for compatibility with the current Peer code.
	Status() conn.ConnectionStatus

	// Stringer is used to display the connection, e.g. in logs.
	//
	// Without this, the logger may use reflection to access and display
	// internal fields. These can be written to concurrently, which can trigger
	// the race detector or even cause a panic.
	fmt.Stringer
}

// Endpoint represents a transport connection endpoint, either local or remote.
//
// Endpoints are not necessarily networked (see e.g. MemoryTransport) but all
// networked endpoints must use IP as the underlying transport protocol to allow
// e.g. IP address filtering. Either IP or Path (or both) must be set.
type Endpoint struct {
	// Protocol specifies the transport protocol.
	Protocol Protocol

	// IP is an IP address (v4 or v6) to connect to. If set, this defines the
	// endpoint as a networked endpoint.
	IP net.IP

	// Port is a network port (either TCP or UDP). If 0, a default port may be
	// used depending on the protocol.
	Port uint16

	// Path is an optional transport-specific path or identifier.
	Path string
}

// NewEndpoint constructs an Endpoint from a types.NetAddress structure.
func NewEndpoint(na *types.NetAddress) Endpoint {
	return Endpoint{
		Protocol: MConnProtocol,
		IP:       na.IP,
		Port:     na.Port,
	}
}

// NodeAddress converts the endpoint into a NodeAddress for the given node ID.
func (e Endpoint) NodeAddress(nodeID types.NodeID) NodeAddress {
	address := NodeAddress{
		NodeID:   nodeID,
		Protocol: e.Protocol,
		Path:     e.Path,
	}
	if len(e.IP) > 0 {
		address.Hostname = e.IP.String()
		address.Port = e.Port
	}
	return address
}

// String formats the endpoint as a URL string.
func (e Endpoint) String() string {
	// If this is a non-networked endpoint with a valid node ID as a path,
	// assume that path is a node ID (to handle opaque URLs of the form
	// scheme:id).
	if e.IP == nil {
		if nodeID, err := types.NewNodeID(e.Path); err == nil {
			return e.NodeAddress(nodeID).String()
		}
	}
	return e.NodeAddress("").String()
}

// Validate validates the endpoint.
func (e Endpoint) Validate() error {
	switch {
	case e.Protocol == "":
		return errors.New("endpoint has no protocol")

	case len(e.IP) > 0 && e.IP.To16() == nil:
		return fmt.Errorf("invalid IP address %v", e.IP)

	case e.Port > 0 && len(e.IP) == 0:
		return fmt.Errorf("endpoint has port %v but no IP", e.Port)

	case len(e.IP) == 0 && e.Path == "":
		return errors.New("endpoint has neither path nor IP")

	default:
		return nil
	}
}