package consensus import ( "bytes" "context" "fmt" "testing" "time" cstypes "github.com/tendermint/tendermint/consensus/types" "github.com/tendermint/tendermint/types" cmn "github.com/tendermint/tmlibs/common" "github.com/tendermint/tmlibs/log" tmpubsub "github.com/tendermint/tendermint/libs/pubsub" ) func init() { config = ResetConfig("consensus_state_test") } func ensureProposeTimeout(timeoutPropose int) time.Duration { return time.Duration(timeoutPropose*2) * time.Millisecond } /* ProposeSuite x * TestProposerSelection0 - round robin ordering, round 0 x * TestProposerSelection2 - round robin ordering, round 2++ x * TestEnterProposeNoValidator - timeout into prevote round x * TestEnterPropose - finish propose without timing out (we have the proposal) x * TestBadProposal - 2 vals, bad proposal (bad block state hash), should prevote and precommit nil FullRoundSuite x * TestFullRound1 - 1 val, full successful round x * TestFullRoundNil - 1 val, full round of nil x * TestFullRound2 - 2 vals, both required for full round LockSuite x * TestLockNoPOL - 2 vals, 4 rounds. one val locked, precommits nil every round except first. x * TestLockPOLRelock - 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka x * TestLockPOLUnlock - 4 vals, one precommits, other 3 polka nil at next round, so we unlock and precomit nil x * TestLockPOLSafety1 - 4 vals. We shouldn't change lock based on polka at earlier round x * TestLockPOLSafety2 - 4 vals. After unlocking, we shouldn't relock based on polka at earlier round * TestNetworkLock - once +1/3 precommits, network should be locked * TestNetworkLockPOL - once +1/3 precommits, the block with more recent polka is committed SlashingSuite x * TestSlashingPrevotes - a validator prevoting twice in a round gets slashed x * TestSlashingPrecommits - a validator precomitting twice in a round gets slashed CatchupSuite * TestCatchup - if we might be behind and we've seen any 2/3 prevotes, round skip to new round, precommit, or prevote HaltSuite x * TestHalt1 - if we see +2/3 precommits after timing out into new round, we should still commit */ //---------------------------------------------------------------------------------------------------- // ProposeSuite func TestStateProposerSelection0(t *testing.T) { cs1, vss := randConsensusState(4) height, round := cs1.Height, cs1.Round newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) startTestRound(cs1, height, round) // wait for new round so proposer is set <-newRoundCh // lets commit a block and ensure proposer for the next height is correct prop := cs1.GetRoundState().Validators.GetProposer() if !bytes.Equal(prop.Address, cs1.privValidator.GetAddress()) { t.Fatalf("expected proposer to be validator %d. Got %X", 0, prop.Address) } // wait for complete proposal <-proposalCh rs := cs1.GetRoundState() signAddVotes(cs1, types.VoteTypePrecommit, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vss[1:]...) // wait for new round so next validator is set <-newRoundCh prop = cs1.GetRoundState().Validators.GetProposer() if !bytes.Equal(prop.Address, vss[1].GetAddress()) { panic(cmn.Fmt("expected proposer to be validator %d. Got %X", 1, prop.Address)) } } // Now let's do it all again, but starting from round 2 instead of 0 func TestStateProposerSelection2(t *testing.T) { cs1, vss := randConsensusState(4) // test needs more work for more than 3 validators newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) // this time we jump in at round 2 incrementRound(vss[1:]...) incrementRound(vss[1:]...) startTestRound(cs1, cs1.Height, 2) <-newRoundCh // wait for the new round // everyone just votes nil. we get a new proposer each round for i := 0; i < len(vss); i++ { prop := cs1.GetRoundState().Validators.GetProposer() if !bytes.Equal(prop.Address, vss[(i+2)%len(vss)].GetAddress()) { panic(cmn.Fmt("expected proposer to be validator %d. Got %X", (i+2)%len(vss), prop.Address)) } rs := cs1.GetRoundState() signAddVotes(cs1, types.VoteTypePrecommit, nil, rs.ProposalBlockParts.Header(), vss[1:]...) <-newRoundCh // wait for the new round event each round incrementRound(vss[1:]...) } } // a non-validator should timeout into the prevote round func TestStateEnterProposeNoPrivValidator(t *testing.T) { cs, _ := randConsensusState(1) cs.SetPrivValidator(nil) height, round := cs.Height, cs.Round // Listen for propose timeout event timeoutCh := subscribe(cs.eventBus, types.EventQueryTimeoutPropose) startTestRound(cs, height, round) // if we're not a validator, EnterPropose should timeout ticker := time.NewTicker(ensureProposeTimeout(cs.config.TimeoutPropose)) select { case <-timeoutCh: case <-ticker.C: panic("Expected EnterPropose to timeout") } if cs.GetRoundState().Proposal != nil { t.Error("Expected to make no proposal, since no privValidator") } } // a validator should not timeout of the prevote round (TODO: unless the block is really big!) func TestStateEnterProposeYesPrivValidator(t *testing.T) { cs, _ := randConsensusState(1) height, round := cs.Height, cs.Round // Listen for propose timeout event timeoutCh := subscribe(cs.eventBus, types.EventQueryTimeoutPropose) proposalCh := subscribe(cs.eventBus, types.EventQueryCompleteProposal) cs.enterNewRound(height, round) cs.startRoutines(3) <-proposalCh // Check that Proposal, ProposalBlock, ProposalBlockParts are set. rs := cs.GetRoundState() if rs.Proposal == nil { t.Error("rs.Proposal should be set") } if rs.ProposalBlock == nil { t.Error("rs.ProposalBlock should be set") } if rs.ProposalBlockParts.Total() == 0 { t.Error("rs.ProposalBlockParts should be set") } // if we're a validator, enterPropose should not timeout ticker := time.NewTicker(ensureProposeTimeout(cs.config.TimeoutPropose)) select { case <-timeoutCh: panic("Expected EnterPropose not to timeout") case <-ticker.C: } } func TestStateBadProposal(t *testing.T) { cs1, vss := randConsensusState(2) height, round := cs1.Height, cs1.Round vs2 := vss[1] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) voteCh := subscribe(cs1.eventBus, types.EventQueryVote) propBlock, _ := cs1.createProposalBlock() //changeProposer(t, cs1, vs2) // make the second validator the proposer by incrementing round round = round + 1 incrementRound(vss[1:]...) // make the block bad by tampering with statehash stateHash := propBlock.AppHash if len(stateHash) == 0 { stateHash = make([]byte, 32) } stateHash[0] = byte((stateHash[0] + 1) % 255) propBlock.AppHash = stateHash propBlockParts := propBlock.MakePartSet(partSize) proposal := types.NewProposal(vs2.Height, round, propBlockParts.Header(), -1, types.BlockID{}) if err := vs2.SignProposal(config.ChainID(), proposal); err != nil { t.Fatal("failed to sign bad proposal", err) } // set the proposal block if err := cs1.SetProposalAndBlock(proposal, propBlock, propBlockParts, "some peer"); err != nil { t.Fatal(err) } // start the machine startTestRound(cs1, height, round) // wait for proposal <-proposalCh // wait for prevote <-voteCh validatePrevote(t, cs1, round, vss[0], nil) // add bad prevote from vs2 and wait for it signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2) <-voteCh // wait for precommit <-voteCh validatePrecommit(t, cs1, round, 0, vss[0], nil, nil) signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2) } //---------------------------------------------------------------------------------------------------- // FullRoundSuite // propose, prevote, and precommit a block func TestStateFullRound1(t *testing.T) { cs, vss := randConsensusState(1) height, round := cs.Height, cs.Round // NOTE: buffer capacity of 0 ensures we can validate prevote and last commit // before consensus can move to the next height (and cause a race condition) cs.eventBus.Stop() eventBus := types.NewEventBusWithBufferCapacity(0) eventBus.SetLogger(log.TestingLogger().With("module", "events")) cs.SetEventBus(eventBus) eventBus.Start() voteCh := subscribe(cs.eventBus, types.EventQueryVote) propCh := subscribe(cs.eventBus, types.EventQueryCompleteProposal) newRoundCh := subscribe(cs.eventBus, types.EventQueryNewRound) startTestRound(cs, height, round) <-newRoundCh // grab proposal re := <-propCh propBlockHash := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState).ProposalBlock.Hash() <-voteCh // wait for prevote validatePrevote(t, cs, round, vss[0], propBlockHash) <-voteCh // wait for precommit // we're going to roll right into new height <-newRoundCh validateLastPrecommit(t, cs, vss[0], propBlockHash) } // nil is proposed, so prevote and precommit nil func TestStateFullRoundNil(t *testing.T) { cs, vss := randConsensusState(1) height, round := cs.Height, cs.Round voteCh := subscribe(cs.eventBus, types.EventQueryVote) cs.enterPrevote(height, round) cs.startRoutines(4) <-voteCh // prevote <-voteCh // precommit // should prevote and precommit nil validatePrevoteAndPrecommit(t, cs, round, 0, vss[0], nil, nil) } // run through propose, prevote, precommit commit with two validators // where the first validator has to wait for votes from the second func TestStateFullRound2(t *testing.T) { cs1, vss := randConsensusState(2) vs2 := vss[1] height, round := cs1.Height, cs1.Round voteCh := subscribe(cs1.eventBus, types.EventQueryVote) newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlock) // start round and wait for propose and prevote startTestRound(cs1, height, round) <-voteCh // prevote // we should be stuck in limbo waiting for more prevotes rs := cs1.GetRoundState() propBlockHash, propPartsHeader := rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header() // prevote arrives from vs2: signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propPartsHeader, vs2) <-voteCh <-voteCh //precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 0, 0, vss[0], propBlockHash, propBlockHash) // we should be stuck in limbo waiting for more precommits // precommit arrives from vs2: signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash, propPartsHeader, vs2) <-voteCh // wait to finish commit, propose in next height <-newBlockCh } //------------------------------------------------------------------------------------------ // LockSuite // two validators, 4 rounds. // two vals take turns proposing. val1 locks on first one, precommits nil on everything else func TestStateLockNoPOL(t *testing.T) { cs1, vss := randConsensusState(2) vs2 := vss[1] height := cs1.Height partSize := cs1.state.ConsensusParams.BlockPartSizeBytes timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) voteCh := subscribe(cs1.eventBus, types.EventQueryVote) proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) /* Round1 (cs1, B) // B B // B B2 */ // start round and wait for prevote cs1.enterNewRound(height, 0) cs1.startRoutines(0) re := <-proposalCh rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) theBlockHash := rs.ProposalBlock.Hash() <-voteCh // prevote // we should now be stuck in limbo forever, waiting for more prevotes // prevote arrives from vs2: signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2) <-voteCh // prevote <-voteCh // precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash) // we should now be stuck in limbo forever, waiting for more precommits // lets add one for a different block // NOTE: in practice we should never get to a point where there are precommits for different blocks at the same round hash := make([]byte, len(theBlockHash)) copy(hash, theBlockHash) hash[0] = byte((hash[0] + 1) % 255) signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2) <-voteCh // precommit // (note we're entering precommit for a second time this round) // but with invalid args. then we enterPrecommitWait, and the timeout to new round <-timeoutWaitCh /// <-newRoundCh t.Log("#### ONTO ROUND 1") /* Round2 (cs1, B) // B B2 */ incrementRound(vs2) // now we're on a new round and not the proposer, so wait for timeout re = <-timeoutProposeCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) if rs.ProposalBlock != nil { panic("Expected proposal block to be nil") } // wait to finish prevote <-voteCh // we should have prevoted our locked block validatePrevote(t, cs1, 1, vss[0], rs.LockedBlock.Hash()) // add a conflicting prevote from the other validator signAddVotes(cs1, types.VoteTypePrevote, hash, rs.LockedBlock.MakePartSet(partSize).Header(), vs2) <-voteCh // now we're going to enter prevote again, but with invalid args // and then prevote wait, which should timeout. then wait for precommit <-timeoutWaitCh <-voteCh // precommit // the proposed block should still be locked and our precommit added // we should precommit nil and be locked on the proposal validatePrecommit(t, cs1, 1, 0, vss[0], nil, theBlockHash) // add conflicting precommit from vs2 // NOTE: in practice we should never get to a point where there are precommits for different blocks at the same round signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.LockedBlock.MakePartSet(partSize).Header(), vs2) <-voteCh // (note we're entering precommit for a second time this round, but with invalid args // then we enterPrecommitWait and timeout into NewRound <-timeoutWaitCh <-newRoundCh t.Log("#### ONTO ROUND 2") /* Round3 (vs2, _) // B, B2 */ incrementRound(vs2) re = <-proposalCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) // now we're on a new round and are the proposer if !bytes.Equal(rs.ProposalBlock.Hash(), rs.LockedBlock.Hash()) { panic(cmn.Fmt("Expected proposal block to be locked block. Got %v, Expected %v", rs.ProposalBlock, rs.LockedBlock)) } <-voteCh // prevote validatePrevote(t, cs1, 2, vss[0], rs.LockedBlock.Hash()) signAddVotes(cs1, types.VoteTypePrevote, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2) <-voteCh <-timeoutWaitCh // prevote wait <-voteCh // precommit validatePrecommit(t, cs1, 2, 0, vss[0], nil, theBlockHash) // precommit nil but be locked on proposal signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlock.MakePartSet(partSize).Header(), vs2) // NOTE: conflicting precommits at same height <-voteCh <-timeoutWaitCh // before we time out into new round, set next proposal block prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1) if prop == nil || propBlock == nil { t.Fatal("Failed to create proposal block with vs2") } incrementRound(vs2) <-newRoundCh t.Log("#### ONTO ROUND 3") /* Round4 (vs2, C) // B C // B C */ // now we're on a new round and not the proposer // so set the proposal block if err := cs1.SetProposalAndBlock(prop, propBlock, propBlock.MakePartSet(partSize), ""); err != nil { t.Fatal(err) } <-proposalCh <-voteCh // prevote // prevote for locked block (not proposal) validatePrevote(t, cs1, 0, vss[0], cs1.LockedBlock.Hash()) signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2) <-voteCh <-timeoutWaitCh <-voteCh validatePrecommit(t, cs1, 2, 0, vss[0], nil, theBlockHash) // precommit nil but locked on proposal signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2) // NOTE: conflicting precommits at same height <-voteCh } // 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka func TestStateLockPOLRelock(t *testing.T) { cs1, vss := randConsensusState(4) vs2, vs3, vs4 := vss[1], vss[2], vss[3] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) voteCh := subscribe(cs1.eventBus, types.EventQueryVote) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlockHeader) // everything done from perspective of cs1 /* Round1 (cs1, B) // B B B B// B nil B nil eg. vs2 and vs4 didn't see the 2/3 prevotes */ // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) theBlockHash := rs.ProposalBlock.Hash() <-voteCh // prevote signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2, vs3, vs4) // prevotes discardFromChan(voteCh, 3) <-voteCh // our precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash) // add precommits from the rest signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4) signAddVotes(cs1, types.VoteTypePrecommit, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs3) // precommites discardFromChan(voteCh, 3) // before we timeout to the new round set the new proposal prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1) propBlockParts := propBlock.MakePartSet(partSize) propBlockHash := propBlock.Hash() incrementRound(vs2, vs3, vs4) // timeout to new round <-timeoutWaitCh //XXX: this isnt guaranteed to get there before the timeoutPropose ... if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil { t.Fatal(err) } <-newRoundCh t.Log("### ONTO ROUND 1") /* Round2 (vs2, C) // B C C C // C C C _) cs1 changes lock! */ // now we're on a new round and not the proposer // but we should receive the proposal select { case <-proposalCh: case <-timeoutProposeCh: <-proposalCh } // go to prevote, prevote for locked block (not proposal), move on <-voteCh validatePrevote(t, cs1, 0, vss[0], theBlockHash) // now lets add prevotes from everyone else for the new block signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propBlockParts.Header(), vs2, vs3, vs4) // prevotes discardFromChan(voteCh, 3) // now either we go to PrevoteWait or Precommit select { case <-timeoutWaitCh: // we're in PrevoteWait, go to Precommit // XXX: there's no guarantee we see the polka, this might be a precommit for nil, // in which case the test fails! <-voteCh case <-voteCh: // we went straight to Precommit } // we should have unlocked and locked on the new block validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash, propBlockHash) signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash, propBlockParts.Header(), vs2, vs3) discardFromChan(voteCh, 2) be := <-newBlockCh b := be.(types.EventDataNewBlockHeader) re = <-newRoundCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) if rs.Height != 2 { panic("Expected height to increment") } if !bytes.Equal(b.Header.Hash(), propBlockHash) { panic("Expected new block to be proposal block") } } // 4 vals, one precommits, other 3 polka at next round, so we unlock and precomit the polka func TestStateLockPOLUnlock(t *testing.T) { cs1, vss := randConsensusState(4) vs2, vs3, vs4 := vss[1], vss[2], vss[3] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) unlockCh := subscribe(cs1.eventBus, types.EventQueryUnlock) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // everything done from perspective of cs1 /* Round1 (cs1, B) // B B B B // B nil B nil eg. didn't see the 2/3 prevotes */ // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) theBlockHash := rs.ProposalBlock.Hash() <-voteCh // prevote signAddVotes(cs1, types.VoteTypePrevote, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs2, vs3, vs4) <-voteCh //precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 0, 0, vss[0], theBlockHash, theBlockHash) rs = cs1.GetRoundState() // add precommits from the rest signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4) signAddVotes(cs1, types.VoteTypePrecommit, cs1.ProposalBlock.Hash(), cs1.ProposalBlockParts.Header(), vs3) // before we time out into new round, set next proposal block prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1) propBlockParts := propBlock.MakePartSet(partSize) incrementRound(vs2, vs3, vs4) // timeout to new round re = <-timeoutWaitCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) lockedBlockHash := rs.LockedBlock.Hash() //XXX: this isnt guaranteed to get there before the timeoutPropose ... if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil { t.Fatal(err) } <-newRoundCh t.Log("#### ONTO ROUND 1") /* Round2 (vs2, C) // B nil nil nil // nil nil nil _ cs1 unlocks! */ // now we're on a new round and not the proposer, // but we should receive the proposal select { case <-proposalCh: case <-timeoutProposeCh: <-proposalCh } // go to prevote, prevote for locked block (not proposal) <-voteCh validatePrevote(t, cs1, 0, vss[0], lockedBlockHash) // now lets add prevotes from everyone else for nil (a polka!) signAddVotes(cs1, types.VoteTypePrevote, nil, types.PartSetHeader{}, vs2, vs3, vs4) // the polka makes us unlock and precommit nil <-unlockCh <-voteCh // precommit // we should have unlocked and committed nil // NOTE: since we don't relock on nil, the lock round is 0 validatePrecommit(t, cs1, 1, 0, vss[0], nil, nil) signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3) <-newRoundCh } // 4 vals // a polka at round 1 but we miss it // then a polka at round 2 that we lock on // then we see the polka from round 1 but shouldn't unlock func TestStateLockPOLSafety1(t *testing.T) { cs1, vss := randConsensusState(4) vs2, vs3, vs4 := vss[1], vss[2], vss[3] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) propBlock := rs.ProposalBlock <-voteCh // prevote validatePrevote(t, cs1, 0, vss[0], propBlock.Hash()) // the others sign a polka but we don't see it prevotes := signVotes(types.VoteTypePrevote, propBlock.Hash(), propBlock.MakePartSet(partSize).Header(), vs2, vs3, vs4) // before we time out into new round, set next proposer // and next proposal block /* _, v1 := cs1.Validators.GetByAddress(vss[0].Address) v1.VotingPower = 1 if updated := cs1.Validators.Update(v1); !updated { panic("failed to update validator") }*/ t.Logf("old prop hash %v", fmt.Sprintf("%X", propBlock.Hash())) // we do see them precommit nil signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3, vs4) prop, propBlock := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1) propBlockHash := propBlock.Hash() propBlockParts := propBlock.MakePartSet(partSize) incrementRound(vs2, vs3, vs4) //XXX: this isnt guaranteed to get there before the timeoutPropose ... if err := cs1.SetProposalAndBlock(prop, propBlock, propBlockParts, "some peer"); err != nil { t.Fatal(err) } <-newRoundCh t.Log("### ONTO ROUND 1") /*Round2 // we timeout and prevote our lock // a polka happened but we didn't see it! */ // now we're on a new round and not the proposer, // but we should receive the proposal select { case re = <-proposalCh: case <-timeoutProposeCh: re = <-proposalCh } rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) if rs.LockedBlock != nil { panic("we should not be locked!") } t.Logf("new prop hash %v", fmt.Sprintf("%X", propBlockHash)) // go to prevote, prevote for proposal block <-voteCh validatePrevote(t, cs1, 1, vss[0], propBlockHash) // now we see the others prevote for it, so we should lock on it signAddVotes(cs1, types.VoteTypePrevote, propBlockHash, propBlockParts.Header(), vs2, vs3, vs4) <-voteCh // precommit // we should have precommitted validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash, propBlockHash) signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs3) <-timeoutWaitCh incrementRound(vs2, vs3, vs4) <-newRoundCh t.Log("### ONTO ROUND 2") /*Round3 we see the polka from round 1 but we shouldn't unlock! */ // timeout of propose <-timeoutProposeCh // finish prevote <-voteCh // we should prevote what we're locked on validatePrevote(t, cs1, 2, vss[0], propBlockHash) newStepCh := subscribe(cs1.eventBus, types.EventQueryNewRoundStep) // add prevotes from the earlier round addVotes(cs1, prevotes...) t.Log("Done adding prevotes!") ensureNoNewStep(newStepCh) } // 4 vals. // polka P0 at R0, P1 at R1, and P2 at R2, // we lock on P0 at R0, don't see P1, and unlock using P2 at R2 // then we should make sure we don't lock using P1 // What we want: // dont see P0, lock on P1 at R1, dont unlock using P0 at R2 func TestStateLockPOLSafety2(t *testing.T) { cs1, vss := randConsensusState(4) vs2, vs3, vs4 := vss[1], vss[2], vss[3] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutProposeCh := subscribe(cs1.eventBus, types.EventQueryTimeoutPropose) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) unlockCh := subscribe(cs1.eventBus, types.EventQueryUnlock) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // the block for R0: gets polkad but we miss it // (even though we signed it, shhh) _, propBlock0 := decideProposal(cs1, vss[0], cs1.Height, cs1.Round) propBlockHash0 := propBlock0.Hash() propBlockParts0 := propBlock0.MakePartSet(partSize) // the others sign a polka but we don't see it prevotes := signVotes(types.VoteTypePrevote, propBlockHash0, propBlockParts0.Header(), vs2, vs3, vs4) // the block for round 1 prop1, propBlock1 := decideProposal(cs1, vs2, vs2.Height, vs2.Round+1) propBlockHash1 := propBlock1.Hash() propBlockParts1 := propBlock1.MakePartSet(partSize) propBlockID1 := types.BlockID{propBlockHash1, propBlockParts1.Header()} incrementRound(vs2, vs3, vs4) cs1.updateRoundStep(0, cstypes.RoundStepPrecommitWait) t.Log("### ONTO Round 1") // jump in at round 1 height := cs1.Height startTestRound(cs1, height, 1) <-newRoundCh if err := cs1.SetProposalAndBlock(prop1, propBlock1, propBlockParts1, "some peer"); err != nil { t.Fatal(err) } <-proposalCh <-voteCh // prevote signAddVotes(cs1, types.VoteTypePrevote, propBlockHash1, propBlockParts1.Header(), vs2, vs3, vs4) <-voteCh // precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 1, 1, vss[0], propBlockHash1, propBlockHash1) // add precommits from the rest signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2, vs4) signAddVotes(cs1, types.VoteTypePrecommit, propBlockHash1, propBlockParts1.Header(), vs3) incrementRound(vs2, vs3, vs4) // timeout of precommit wait to new round <-timeoutWaitCh // in round 2 we see the polkad block from round 0 newProp := types.NewProposal(height, 2, propBlockParts0.Header(), 0, propBlockID1) if err := vs3.SignProposal(config.ChainID(), newProp); err != nil { t.Fatal(err) } if err := cs1.SetProposalAndBlock(newProp, propBlock0, propBlockParts0, "some peer"); err != nil { t.Fatal(err) } // Add the pol votes addVotes(cs1, prevotes...) <-newRoundCh t.Log("### ONTO Round 2") /*Round2 // now we see the polka from round 1, but we shouldnt unlock */ select { case <-timeoutProposeCh: <-proposalCh case <-proposalCh: } select { case <-unlockCh: panic("validator unlocked using an old polka") case <-voteCh: // prevote our locked block } validatePrevote(t, cs1, 2, vss[0], propBlockHash1) } //------------------------------------------------------------------------------------------ // SlashingSuite // TODO: Slashing /* func TestStateSlashingPrevotes(t *testing.T) { cs1, vss := randConsensusState(2) vs2 := vss[1] proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh <-voteCh // prevote rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) // we should now be stuck in limbo forever, waiting for more prevotes // add one for a different block should cause us to go into prevote wait hash := rs.ProposalBlock.Hash() hash[0] = byte(hash[0]+1) % 255 signAddVotes(cs1, types.VoteTypePrevote, hash, rs.ProposalBlockParts.Header(), vs2) <-timeoutWaitCh // NOTE: we have to send the vote for different block first so we don't just go into precommit round right // away and ignore more prevotes (and thus fail to slash!) // add the conflicting vote signAddVotes(cs1, types.VoteTypePrevote, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2) // XXX: Check for existence of Dupeout info } func TestStateSlashingPrecommits(t *testing.T) { cs1, vss := randConsensusState(2) vs2 := vss[1] proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh <-voteCh // prevote // add prevote from vs2 signAddVotes(cs1, types.VoteTypePrevote, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2) <-voteCh // precommit // we should now be stuck in limbo forever, waiting for more prevotes // add one for a different block should cause us to go into prevote wait hash := rs.ProposalBlock.Hash() hash[0] = byte(hash[0]+1) % 255 signAddVotes(cs1, types.VoteTypePrecommit, hash, rs.ProposalBlockParts.Header(), vs2) // NOTE: we have to send the vote for different block first so we don't just go into precommit round right // away and ignore more prevotes (and thus fail to slash!) // add precommit from vs2 signAddVotes(cs1, types.VoteTypePrecommit, rs.ProposalBlock.Hash(), rs.ProposalBlockParts.Header(), vs2) // XXX: Check for existence of Dupeout info } */ //------------------------------------------------------------------------------------------ // CatchupSuite //------------------------------------------------------------------------------------------ // HaltSuite // 4 vals. // we receive a final precommit after going into next round, but others might have gone to commit already! func TestStateHalt1(t *testing.T) { cs1, vss := randConsensusState(4) vs2, vs3, vs4 := vss[1], vss[2], vss[3] partSize := cs1.state.ConsensusParams.BlockPartSizeBytes proposalCh := subscribe(cs1.eventBus, types.EventQueryCompleteProposal) timeoutWaitCh := subscribe(cs1.eventBus, types.EventQueryTimeoutWait) newRoundCh := subscribe(cs1.eventBus, types.EventQueryNewRound) newBlockCh := subscribe(cs1.eventBus, types.EventQueryNewBlock) voteCh := subscribeToVoter(cs1, cs1.privValidator.GetAddress()) // start round and wait for propose and prevote startTestRound(cs1, cs1.Height, 0) <-newRoundCh re := <-proposalCh rs := re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) propBlock := rs.ProposalBlock propBlockParts := propBlock.MakePartSet(partSize) <-voteCh // prevote signAddVotes(cs1, types.VoteTypePrevote, propBlock.Hash(), propBlockParts.Header(), vs3, vs4) <-voteCh // precommit // the proposed block should now be locked and our precommit added validatePrecommit(t, cs1, 0, 0, vss[0], propBlock.Hash(), propBlock.Hash()) // add precommits from the rest signAddVotes(cs1, types.VoteTypePrecommit, nil, types.PartSetHeader{}, vs2) // didnt receive proposal signAddVotes(cs1, types.VoteTypePrecommit, propBlock.Hash(), propBlockParts.Header(), vs3) // we receive this later, but vs3 might receive it earlier and with ours will go to commit! precommit4 := signVote(vs4, types.VoteTypePrecommit, propBlock.Hash(), propBlockParts.Header()) incrementRound(vs2, vs3, vs4) // timeout to new round <-timeoutWaitCh re = <-newRoundCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) t.Log("### ONTO ROUND 1") /*Round2 // we timeout and prevote our lock // a polka happened but we didn't see it! */ // go to prevote, prevote for locked block <-voteCh // prevote validatePrevote(t, cs1, 0, vss[0], rs.LockedBlock.Hash()) // now we receive the precommit from the previous round addVotes(cs1, precommit4) // receiving that precommit should take us straight to commit <-newBlockCh re = <-newRoundCh rs = re.(types.EventDataRoundState).RoundState.(*cstypes.RoundState) if rs.Height != 2 { panic("expected height to increment") } } // subscribe subscribes test client to the given query and returns a channel with cap = 1. func subscribe(eventBus *types.EventBus, q tmpubsub.Query) <-chan interface{} { out := make(chan interface{}, 1) err := eventBus.Subscribe(context.Background(), testSubscriber, q, out) if err != nil { panic(fmt.Sprintf("failed to subscribe %s to %v", testSubscriber, q)) } return out } // discardFromChan reads n values from the channel. func discardFromChan(ch <-chan interface{}, n int) { for i := 0; i < n; i++ { <-ch } }