package p2p import ( "errors" "sort" "github.com/gogo/protobuf/proto" "github.com/tendermint/tendermint/libs/log" ) // ============================================================================ // TODO: Types and business logic below are temporary and will be removed once // the legacy p2p stack is removed in favor of the new model. // // ref: https://github.com/tendermint/tendermint/issues/5670 // ============================================================================ var _ Reactor = (*ReactorShim)(nil) type ( messageValidator interface { Validate() error } // ReactorShim defines a generic shim wrapper around a BaseReactor. It is // responsible for wiring up legacy p2p behavior to the new p2p semantics // (e.g. proxying Envelope messages to legacy peers). ReactorShim struct { BaseReactor Name string PeerUpdates *PeerUpdatesCh Channels map[ChannelID]*ChannelShim } // ChannelShim defines a generic shim wrapper around a legacy p2p channel // and the new p2p Channel. It also includes the raw bi-directional Go channels // so we can proxy message delivery. ChannelShim struct { Descriptor *ChannelDescriptor Channel *Channel } // ChannelDescriptorShim defines a shim wrapper around a legacy p2p channel // and the proto.Message the new p2p Channel is responsible for handling. // A ChannelDescriptorShim is not contained in ReactorShim, but is rather // used to construct a ReactorShim. ChannelDescriptorShim struct { MsgType proto.Message Descriptor *ChannelDescriptor } ) func NewReactorShim(logger log.Logger, name string, descriptors map[ChannelID]*ChannelDescriptorShim) *ReactorShim { channels := make(map[ChannelID]*ChannelShim) for _, cds := range descriptors { chShim := NewChannelShim(cds, 0) channels[chShim.Channel.id] = chShim } rs := &ReactorShim{ Name: name, PeerUpdates: NewPeerUpdates(make(chan PeerUpdate)), Channels: channels, } rs.BaseReactor = *NewBaseReactor(name, rs) rs.SetLogger(logger) return rs } func NewChannelShim(cds *ChannelDescriptorShim, buf uint) *ChannelShim { return &ChannelShim{ Descriptor: cds.Descriptor, Channel: NewChannel( ChannelID(cds.Descriptor.ID), cds.MsgType, make(chan Envelope, buf), make(chan Envelope, buf), make(chan PeerError, buf), ), } } // proxyPeerEnvelopes iterates over each p2p Channel and starts a separate // go-routine where we listen for outbound envelopes sent during Receive // executions (or anything else that may send on the Channel) and proxy them to // the corresponding Peer using the To field from the envelope. func (rs *ReactorShim) proxyPeerEnvelopes() { for _, cs := range rs.Channels { go func(cs *ChannelShim) { for e := range cs.Channel.outCh { msg := proto.Clone(cs.Channel.messageType) msg.Reset() wrapper, ok := msg.(Wrapper) if ok { if err := wrapper.Wrap(e.Message); err != nil { rs.Logger.Error( "failed to proxy envelope; failed to wrap message", "ch_id", cs.Descriptor.ID, "msg", e.Message, "err", err, ) continue } } else { msg = e.Message } bz, err := proto.Marshal(msg) if err != nil { rs.Logger.Error( "failed to proxy envelope; failed to encode message", "ch_id", cs.Descriptor.ID, "msg", e.Message, "err", err, ) continue } switch { case e.Broadcast: rs.Switch.Broadcast(cs.Descriptor.ID, bz) case e.To != "": src := rs.Switch.peers.Get(e.To) if src == nil { rs.Logger.Debug( "failed to proxy envelope; failed to find peer", "ch_id", cs.Descriptor.ID, "msg", e.Message, "peer", e.To, ) continue } if !src.Send(cs.Descriptor.ID, bz) { rs.Logger.Error( "failed to proxy message to peer", "ch_id", cs.Descriptor.ID, "msg", e.Message, "peer", e.To, ) } default: rs.Logger.Error("failed to proxy envelope; missing peer ID", "ch_id", cs.Descriptor.ID, "msg", e.Message) } } }(cs) } } // handlePeerErrors iterates over each p2p Channel and starts a separate go-routine // where we listen for peer errors. For each peer error, we find the peer from // the legacy p2p Switch and execute a StopPeerForError call with the corresponding // peer error. func (rs *ReactorShim) handlePeerErrors() { for _, cs := range rs.Channels { go func(cs *ChannelShim) { for pErr := range cs.Channel.errCh { if pErr.PeerID != "" { peer := rs.Switch.peers.Get(pErr.PeerID) if peer == nil { rs.Logger.Error("failed to handle peer error; failed to find peer", "peer", pErr.PeerID) continue } rs.Switch.StopPeerForError(peer, pErr.Err) } } }(cs) } } // OnStart executes the reactor shim's OnStart hook where we start all the // necessary go-routines in order to proxy peer envelopes and errors per p2p // Channel. func (rs *ReactorShim) OnStart() error { if rs.Switch == nil { return errors.New("proxyPeerEnvelopes: reactor shim switch is nil") } // start envelope proxying and peer error handling in separate go routines rs.proxyPeerEnvelopes() rs.handlePeerErrors() return nil } // GetChannel returns a p2p Channel reference for a given ChannelID. If no // Channel exists, nil is returned. func (rs *ReactorShim) GetChannel(cID ChannelID) *Channel { channelShim, ok := rs.Channels[cID] if ok { return channelShim.Channel } return nil } // GetChannels implements the legacy Reactor interface for getting a slice of all // the supported ChannelDescriptors. func (rs *ReactorShim) GetChannels() []*ChannelDescriptor { sortedChIDs := make([]ChannelID, 0, len(rs.Channels)) for cID := range rs.Channels { sortedChIDs = append(sortedChIDs, cID) } sort.Slice(sortedChIDs, func(i, j int) bool { return sortedChIDs[i] < sortedChIDs[j] }) descriptors := make([]*ChannelDescriptor, len(rs.Channels)) for i, cID := range sortedChIDs { descriptors[i] = rs.Channels[cID].Descriptor } return descriptors } // AddPeer sends a PeerUpdate with status PeerStatusUp on the PeerUpdateCh. // The embedding reactor must be sure to listen for messages on this channel to // handle adding a peer. func (rs *ReactorShim) AddPeer(peer Peer) { select { case rs.PeerUpdates.updatesCh <- PeerUpdate{PeerID: peer.ID(), Status: PeerStatusUp}: rs.Logger.Debug("sent peer update", "reactor", rs.Name, "peer", peer.ID(), "status", PeerStatusUp) case <-rs.PeerUpdates.Done(): // NOTE: We explicitly DO NOT close the PeerUpdatesCh's updateCh go channel. // This is because there may be numerous spawned goroutines that are // attempting to send on the updateCh go channel and when the reactor stops // we do not want to preemptively close the channel as that could result in // panics sending on a closed channel. This also means that reactors MUST // be certain there are NO listeners on the updateCh channel when closing or // stopping. } } // RemovePeer sends a PeerUpdate with status PeerStatusDown on the PeerUpdateCh. // The embedding reactor must be sure to listen for messages on this channel to // handle removing a peer. func (rs *ReactorShim) RemovePeer(peer Peer, reason interface{}) { select { case rs.PeerUpdates.updatesCh <- PeerUpdate{PeerID: peer.ID(), Status: PeerStatusDown}: rs.Logger.Debug( "sent peer update", "reactor", rs.Name, "peer", peer.ID(), "reason", reason, "status", PeerStatusDown, ) case <-rs.PeerUpdates.Done(): // NOTE: We explicitly DO NOT close the PeerUpdatesCh's updateCh go channel. // This is because there may be numerous spawned goroutines that are // attempting to send on the updateCh go channel and when the reactor stops // we do not want to preemptively close the channel as that could result in // panics sending on a closed channel. This also means that reactors MUST // be certain there are NO listeners on the updateCh channel when closing or // stopping. } } // Receive implements a generic wrapper around implementing the Receive method // on the legacy Reactor p2p interface. If the reactor is running, Receive will // find the corresponding new p2p Channel, create and decode the appropriate // proto.Message from the msgBytes, execute any validation and finally construct // and send a p2p Envelope on the appropriate p2p Channel. func (rs *ReactorShim) Receive(chID byte, src Peer, msgBytes []byte) { if !rs.IsRunning() { return } cID := ChannelID(chID) channelShim, ok := rs.Channels[cID] if !ok { rs.Logger.Error("unexpected channel", "peer", src, "ch_id", chID) return } msg := proto.Clone(channelShim.Channel.messageType) msg.Reset() if err := proto.Unmarshal(msgBytes, msg); err != nil { rs.Logger.Error("error decoding message", "peer", src, "ch_id", cID, "msg", msg, "err", err) rs.Switch.StopPeerForError(src, err) return } validator, ok := msg.(messageValidator) if ok { if err := validator.Validate(); err != nil { rs.Logger.Error("invalid message", "peer", src, "ch_id", cID, "msg", msg, "err", err) rs.Switch.StopPeerForError(src, err) return } } wrapper, ok := msg.(Wrapper) if ok { var err error msg, err = wrapper.Unwrap() if err != nil { rs.Logger.Error("failed to unwrap message", "peer", src, "ch_id", chID, "msg", msg, "err", err) return } } select { case channelShim.Channel.inCh <- Envelope{From: src.ID(), Message: msg}: rs.Logger.Debug("proxied envelope", "reactor", rs.Name, "ch_id", cID, "peer", src.ID()) case <-channelShim.Channel.Done(): // NOTE: We explicitly DO NOT close the p2p Channel's inbound go channel. // This is because there may be numerous spawned goroutines that are // attempting to send on the inbound channel and when the reactor stops we // do not want to preemptively close the channel as that could result in // panics sending on a closed channel. This also means that reactors MUST // be certain there are NO listeners on the inbound channel when closing or // stopping. } }