in consensus/state.go, when calulating metrics, retrieve address (ergo, pubkey) once prior to iterating over validatorset to ensure we do not make excessive calls to signer.
Partially closes: #4865
Closes#4926
The dump consensus state had this:
"last_commit": {
"votes": [
"Vote{0:04CBBF43CA3E 385085/00/2(Precommit) 1B73DA9FC4C8 42C97B86D89D @ 2020-05-27T06:46:51.042392895Z}",
"Vote{1:055799E028FA 385085/00/2(Precommit) 652B08AD61EA 0D507D7FA3AB @ 2020-06-28T04:57:29.20793209Z}",
"Vote{2:056024CFA910 385085/00/2(Precommit) 652B08AD61EA C8E95532A4C3 @ 2020-06-28T04:57:29.452696998Z}",
"Vote{3:0741C95814DA 385085/00/2(Precommit) 652B08AD61EA 36D567615F7C @ 2020-06-28T04:57:29.279788593Z}",
Note there's a precommit in there from the first val from May (2020-05-27) while the rest are from today (2020-06-28). It suggests there's a validator from an old instance of the network at this height (they're using the same chain-id!). Obviously a single bad validator shouldn't be an issue. But the Commit refactor work introduced a bug.
When we propose a block, we get the block.LastCommit by calling MakeCommit on the set of precommits we saw for the last height. This set may include precommits for a different block, and hence the block.LastCommit we propose may include precommits that aren't actually for the last block (but of course +2/3 will be). Before v0.33, we just skipped over these precommits during verification. But in v0.33, we expect all signatures for a blockID to be for the same block ID! Thus we end up proposing a block that we can't verify.
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* test functions take time.Now and other minor changes
* updated remaining test files
* Update validation_test.go
* fix typo
* go fmt
* import time
Co-authored-by: Marko <marbar3778@yahoo.com>
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* prometheus/metrics: two new metrics for consensus
- add consensus_validator_power metric so if a node is a validator it can see its own power in prometheus
- add last_signed_height metric so if a node is a validator it can be aware of at which height the most recent time it signed.
- closes: #3773
- closes: #3083
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* check if signature is present
* minor change and check if sig is not absent
* add changelog entry
* Update consensus/state.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
* add label with validator address
* change address to vali_address
* add metric missed blocks
* add changelog entry for missed blocks metric
* address naming & add docs
also
- do not send any LastCommitInfo.Votes for 1st block.
- use cs.LastValidators (not cs.Validators) in recordMetrics when counting missing validators
note:
remember that the first LastCommit is intentionally empty, so it makes
sense for LastCommitInfo.Votes to also be empty. Because we can't really
tell if validator signed or not. Similar for ^ metrics, we can't say if
particular validator was missing or not.
Closes#4192
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* libs/common: Refactor libs/common 4
- move byte function out of cmn to its own pkg
- move tempfile out of cmn to its own pkg
- move throttletimer to its own pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix linting issues
* libs/common: refactor libs common 3
- move nil.go into types folder and make private
- move service & baseservice out of common into service pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
* Removal of TotalTx & NumTx
- Removed totalTx and numTx
closes#2521
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* abci proto changes
* proto number fix
* txfilter_test fix
* comments on PR
* further changes
* bring back metrics
* fix indexer
* fix TestBlockMaxDataBytes and TestBlockMaxDataBytesUnknownEvidence
* indexer service back to header
* statistics.go fix
* fix ci
* listen for blocks, not headers
to be able to record txs throughput
* fix TestNetworkNewBlock
* fix tests
* fix tests in types package
* fixes after Anton's review
* fix tests
* bring back `consensus_total_txs` metric
I mistakenly thought it was removed.
* improve changelog
* remove LastBlockTotalTx from state
* docs: remove getNumTxs from BeginBlock Java example
BREAKING
Example response:
```json
{
"jsonrpc": "2.0",
"id": "",
"result": {
"height": "2109",
"txs_results": null,
"begin_block_events": null,
"end_block_events": null,
"validator_updates": null,
"consensus_param_updates": null
}
}
```
Old result consisted of ABCIResponses struct and height. Exposing
internal ABCI structures (which we store in state package) in RPC seems
bad to me for the following reasons:
1) high risk of breaking the API when somebody changes internal structs
(HAPPENED HERE!)
2) RPC is aware of ABCI, which I'm not sure we want
* crypto: expose MaxAunts for documentation purposes
* types: update godoc for new maxes
* docs: make hard-coded limits more explicit
* wal: add todo to clarify max size
* shorten lines in test
* cs: panic only when WAL#WriteSync fails
- modify WAL#Write and WAL#WriteSync to return an error
* fix test
* types: validate Part#Proof
add ValidateBasic to crypto/merkle/SimpleProof
* cs: limit max bit array size and block parts count
* cs: test new limits
* cs: only assert important stuff
* update changelog and bump version to 0.32.7
* fixes after Ethan's review
* align max wal msg and max consensus msg sizes
* fix tests
* fix test
* add change log for 31.11
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* New lint version upgrade
- linter was upgraded
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* enable-a;; is deprecated
* minor change
* another try
* some more changes
* some more changes
* reenable prealloc
* add version till bot is fixed
* Pin range scope vars
* Don't disable scopelint
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint
Contributes to #3262
* cs: check for SkipTimeoutCommit or wait timeout in handleTxsAvailable
Previously, if create_empty_blocks was set to false, TM sometimes could
create 2 consecutive blocks without actually waiting for timeoutCommit
(1 sec. by default).
```
I[2019-08-29|07:32:43.874] Executed block module=state height=47 validTxs=10 invalidTxs=0
I[2019-08-29|07:32:43.876] Committed state module=state height=47 txs=10 appHash=F88C010000000000
I[2019-08-29|07:32:44.885] Executed block module=state height=48 validTxs=2 invalidTxs=0
I[2019-08-29|07:32:44.887] Committed state module=state height=48 txs=2 appHash=FC8C010000000000
I[2019-08-29|07:32:44.908] Executed block module=state height=49 validTxs=8 invalidTxs=0
I[2019-08-29|07:32:44.909] Committed state module=state height=49 txs=8 appHash=8C8D010000000000
I[2019-08-29|07:32:45.886] Executed block module=state height=50 validTxs=2 invalidTxs=0
I[2019-08-29|07:32:45.895] Committed state module=state height=50 txs=2 appHash=908D010000000000
I[2019-08-29|07:32:45.908] Executed block module=state height=51 validTxs=8 invalidTxs=0
I[2019-08-29|07:32:45.909] Committed state module=state height=51 txs=8 appHash=A08D010000000000
```
This commit fixes that by adding a check to handleTxsAvailable.
Fixes#3908
* update changelog
* schedule timeoutCommit if StartTime is in the future
or SkipTimeoutCommit=true && we DON'T have all the votes
* fix TestReactorCreatesBlockWhenEmptyBlocksFalse
by checking if we have LastCommit or not
* address Ethan's comments
* Remove unnecessary type conversions
* Consolidate repeated strings into consts
* Clothe return statements
* Update blockchain/v1/reactor_fsm_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=unconvert
golangci-lint run --no-config --disable-all=true --enable=goconst
golangci-lint run --no-config --disable-all=true --enable=nakedret
Contributes to #3262
* Add test for bcBlockRequestMessage ValidateBasic method
* Add test for bcNoBlockResponseMessage ValidateBasic method
* Add test for bcStatusRequestMessage ValidateBasic method
* Add test for bcStatusResponseMessage ValidateBasic method
* Add blockchain v1 reactor ValidateBasic tests
* Add test for NewRoundStepMessage ValidateBasic method
* Add test for NewValidBlockMessage ValidateBasic method
* Test BlockParts Size
* Import cmn package
* Add test for ProposalPOLMessage ValidateBasic method
* Add test for BlockPartMessage ValidateBasic method
* Add test for HasVoteMessage ValidateBasic method
* Add test for VoteSetMaj23Message ValidateBasic method
* Add test for VoteSetBitsMessage ValidateBasic method
* Fix linter errors
* Improve readability
* Add test for BaseConfig ValidateBasic method
* Add test for RPCConfig ValidateBasic method
* Add test for P2PConfig ValidateBasic method
* Add test for MempoolConfig ValidateBasic method
* Add test for FastSyncConfig ValidateBasic method
* Add test for ConsensusConfig ValidateBasic method
* Add test for InstrumentationConfig ValidateBasic method
* Add test for BlockID ValidateBasic method
* Add test for SignedHeader ValidateBasic method
* Add test for MockGoodEvidence and MockBadEvidence ValidateBasic methods
* Remove debug logging
Co-Authored-By: Marko <marbar3778@yahoo.com>
* Update MempoolConfig field
* Test a single struct field at a time, for maintainability
Fixes#2740
Anton Kaliaev
Joe Bowman
Tess Rinearson
Erik Grinaker
Marko
Shivani Joshi
Erik Grinaker
tau3
Prince Sinha
Cuong Manh Le
Black3HDF
Greg Zaitsev
Ethan Buchman
Phil Salant