This is just a configuration change to default to using the new stack
unless explicitly disabled (e.g. `UseLegacy`) this renames the
configuration value and makes the configuration logic more clear.
The legacy option is good to retain as a fallback if the new stack has
issues operationally, but we should make sure that most of the time
we're using the new stack.
## Description
Expose p2p functions for use in the sdk.
These functions could also be copied over to the sdk. I dont have a preference of which is better.
Conflicting votes are now sent to the evidence pool to form duplicate vote evidence only once
the height of the evidence is finished and the time of the block finalised.
The `NodeInfo` interface does not appear to serve any purpose at all, so I removed it and renamed the `DefaultNodeInfo` struct to `NodeInfo` (including the Protobuf representations). Let me know if this is actually needed for anything.
Only the Protobuf rename is listed in the changelog, since we do not officially support API stability of the `p2p` package (according to `README.md`). The on-wire protocol remains compatible.
## Description
partially cleanup in preparation for errcheck
i ignored a bunch of defer errors in tests but with the update to go 1.14 we can use `t.Cleanup(func() { if err := <>; err != nil {..}}` to cover those errors, I will do this in pr number two of enabling errcheck.
ref #5059
Closes: #4530
This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.
* rpc/client: do not pass height param if height ptr is nil
* rpc/core: validate incoming evidence!
* only accept ConflictingHeadersEvidence if one
of the headers is committed from this full node's perspective
This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.
* swap CommitSig with Vote in LunaticValidatorEvidence
Vote is needed to validate signature
* no need to embed client
http is a provider and should not be used as a client
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
This PR is related to #3107 and a continuation of #3351
It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction.
Given two hosts A and B:
Host A is listener/client
Host B is dialer/server (contains the secret key)
When A requires a signature, it needs to wait for B to dial in before it can issue a request.
A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect.
The original rationale behind this design was based on security.
Host B only allows outbound connections to a list of whitelisted hosts.
It is not possible to reach B unless B dials in. There are no listening/open ports in B.
This PR results in the following changes:
Refactors ping/heartbeat to avoid previously existing race conditions.
Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow.
Unifies and abstracts away the differences between unix and tcp sockets.
A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj)
The signer request handler (server side) is customizable to increase testability.
Updates and extends unit tests
A high level overview of the classes is as follows:
Transport (endpoints): The following classes take care of establishing a connection
SignerDialerEndpoint
SignerListeningEndpoint
SignerEndpoint groups common functionality (read/write/timeouts/etc.)
Signing (client/server): The following classes take care of exchanging request/responses
SignerClient
SignerServer
This PR also closes#3601
Commits:
* refactoring - work in progress
* reworking unit tests
* Encapsulating and fixing unit tests
* Improve tests
* Clean up
* Fix/improve unit tests
* clean up tests
* Improving service endpoint
* fixing unit test
* fix linter issues
* avoid invalid cache values (improve later?)
* complete implementation
* wip
* improved connection loop
* Improve reconnections + fixing unit tests
* addressing comments
* small formatting changes
* clean up
* Update node/node.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* check during initialization
* dropping connecting when writing fails
* removing break
* use t.log instead
* unifying and using cmn.GetFreePort()
* review fixes
* reordering and unifying drop connection
* closing instead of signalling
* refactored service loop
* removed superfluous brackets
* GetPubKey can return errors
* Revert "GetPubKey can return errors"
This reverts commit 68c06f19b4.
* adding entry to changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* updating node.go
* review fixes
* fixes linter
* fixing unit test
* small fixes in comments
* addressing review comments
* addressing review comments 2
* reverting suggestion
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* do not expose brokenSignerDialerEndpoint
* clean up logging
* unifying methods
shorten test time
signer also drops
* reenabling pings
* improving testability + unit test
* fixing go fmt + unit test
* remove unused code
* Addressing review comments
* simplifying connection workflow
* fix linter/go import issue
* using base service quit
* updating comment
* Simplifying design + adjusting names
* fixing linter issues
* refactoring test harness + fixes
* Addressing review comments
* cleaning up
* adding additional error check
* node: allow replacing existing p2p.Reactor(s)
using [`CustomReactors`
option](https://godoc.org/github.com/tendermint/tendermint/node#CustomReactors).
Warning: beware of accidental name clashes. Here is the list of existing
reactors: MEMPOOL, BLOCKCHAIN, CONSENSUS, EVIDENCE, PEX.
* check the absence of "CUSTOM" prefix
* merge 2 tests
* add doc.go to node package
Sam Kleinman
Callum Waters
JayT106
Marko
Aleksandr Bezobchuk
Erik Grinaker
Anton Kaliaev
Erik Grinaker
Juan Leni