tendermint

Commit Graph

Author	SHA1	Message	Date
Sam Kleinman	6e921f6644	p2p: change default to use new stack (#6862 ) This is just a configuration change to default to using the new stack unless explicitly disabled (e.g. `UseLegacy`) this renames the configuration value and makes the configuration logic more clear. The legacy option is good to retain as a fallback if the new stack has issues operationally, but we should make sure that most of the time we're using the new stack.	3 years ago
William Banfield	bc2b529b95	inspect: add inspect mode for debugging crashed tendermint node (#6785 ) EDIT: Updated, see [comment below]( https://github.com/tendermint/tendermint/pull/6785#issuecomment-897793175) This change adds a sketch of the `Debug` mode. This change adds a `Debug` struct to the node package. This `Debug` struct is intended to be created and started by a command in the `cmd` directory. The `Debug` struct runs the RPC server on the data directories: both the state store and the block store. This change required a good deal of refactoring. Namely, a new `rpc.go` file was added to the `node` package. This file encapsulates functions for starting RPC servers used by nodes. A potential additional change is to further factor this code into shared code _in_ the `rpc` package. Minor API tweaks were also made that seemed appropriate such as the mechanism for fetching routes from the `rpc/core` package. Additional work is required to register the `Debug` service as a command in the `cmd` directory but I am looking for feedback on if this direction seems appropriate before diving much further. closes: #5908	3 years ago
Sam Kleinman	bf77c0c544	rpc: support new p2p infrastructure (#6820 )	3 years ago
Sam Kleinman	d56a44b884	node: minimize hardcoded service initialization (#6798 ) * node: minimize hardcoded service initialization * hacking * nil safety * reduce space * remove genesis state store * fix lint * fix pex * unwind some odering effects * fix tests * remove unused experiment	3 years ago
Callum Waters	6ff4c3139c	blockchain: rename to blocksync service (#6755 )	3 years ago
Callum Waters	91e277d7b7	enable pex reactor depending on config param (#6762 )	3 years ago
JayT106	e70445f942	statesync/event: emit statesync start/end event (#6700 )	3 years ago
JayT106	c4f77ab6d1	fastsync/event: emit fastsync status event when switching consensus/fastsync (#6619 ) closes #2498 solves part of #3365 Note: difficult to test the event emit in SwitchToFastSync part, might need to change `stateSyncReactor` to an interface in the `nodeImpl` struct	3 years ago
Marko	0e9bec1b53	pkg: expose p2p functions (#6627 ) ## Description Expose p2p functions for use in the sdk. These functions could also be copied over to the sdk. I dont have a preference of which is better.	3 years ago
Sam Kleinman	9ffa7e8a2b	types: move NodeInfo from p2p (#6618 )	3 years ago
JayT106	2cc872543b	rpc: add max peer block height into /status rpc call (#6610 ) use `maxPeerBlockHeight` information to show the current network's best height. Closes #3983 Relate to #3365 ref: the`highestBlock` in the response of `eth.isSyncing` call https://web3js.readthedocs.io/en/v1.3.4/web3-eth.html#issyncing	3 years ago
Sam Kleinman	ae5f98881b	p2p: make NodeID and NetAddress public (#6583 )	3 years ago
JayT106	2b0a3c151b	fastsync: update the metrics during fast-sync (#6590 ) Closes #3507	3 years ago
Callum Waters	6e238b5b9d	statesync: make fetching chunks more robust (#6587 )	3 years ago
Sam Kleinman	a6b30faf35	libs/time: move types/time into libs (#6595 )	3 years ago
Callum Waters	c0f7fb08c0	config: add root dir to priv validator (#6585 )	3 years ago
Aleksandr Bezobchuk	7d961b55b2	state sync: tune request timeout and chunkers (#6566 )	3 years ago
Callum Waters	74af343f28	statesync: tune backfill process (#6565 ) This PR make some tweaks to backfill after running e2e tests: - Separates sync and backfill as two distinct processes that the node calls. The reason is because if sync fails then the node should fail but if backfill fails it is still possible to proceed. - Removes peers who don't have the block at a height from the local peer list. As the process goes backwards if a node doesn't have a block at a height they're likely pruning blocks and thus they won't have any prior ones either. - Sleep when we've run out of peers, then try again.	3 years ago
JayT106	a456b71f1f	state: move pruneBlocks from consensus/state to state/execution (#6541 ) state: move pruneBlocks function from consensus/state to state/execution Closes #5414	3 years ago
Callum Waters	32bc399bdd	node: fix genesis on start up (#6563 )	3 years ago
Callum Waters	d6b4bc267b	node/tests: clean up use of genesis doc and surrounding tests (#6554 )	3 years ago
Callum Waters	6f6ac5c04e	state sync: reverse sync implementation (#6463 )	3 years ago
Sam Kleinman	a855f96946	p2p: renames for reactors and routing layer internal moves (#6547 )	3 years ago
Sam Kleinman	00c284d9d7	node: change package interface (#6540 )	4 years ago
Aleksandr Bezobchuk	1e4bc04cd6	mempool: v1 implementation (#6466 )	4 years ago
Sam Kleinman	7bf84d9d7f	config: seperate priv validator config into seperate section (#6462 ) Addresses a beginning component of #6255	4 years ago
JayT106	711a718162	config/indexer: custom event indexing (#6411 )	4 years ago
Sam Kleinman	d9134063e7	rpc: add chunked rpc interface (#6445 )	4 years ago
Sam Kleinman	fa891c5a4b	node: cleanup pex initialization (#6467 )	4 years ago
Callum Waters	c320eb1407	split out initializers into setup.go (#6446 )	4 years ago
Callum Waters	64e7b5efea	p2p: add channel descriptors to open channel (#6440 )	4 years ago
JayT106	e334555393	node/state: graceful shutdown in the consensus state (#6370 )	4 years ago
Sam Kleinman	0b0914b3df	rpc: remove global environment (#6426 )	4 years ago
Callum Waters	ec5e3b0b02	p2p: wire pex v2 reactor to router (#6407 )	4 years ago
Aleksandr Bezobchuk	bc643b19c4	p2p: support private peer IDs in new p2p stack (#6409 ) Pass a set of private peer ids to the `PeerManager` and any node that exists in this set is not returned in the `Advertise` method. closes: #6405	4 years ago
Sam Kleinman	8eccaf9535	mempool: remove vestigal mempool wal (#6396 )	4 years ago
Callum Waters	9efc20c963	p2p: improve PEX reactor (#6305 )	4 years ago
Callum Waters	36d8cb09df	config: create `BootstrapPeers` p2p config parameter (#6372 )	4 years ago
JayT106	43eacd159f	state/indexer: reconstruct indexer, move txindex into the indexer package (#6382 )	4 years ago
Callum Waters	8e8de2b2fb	node: use db provider instead of mem db (#6362 )	4 years ago
Aleksandr Bezobchuk	47b28fd6aa	p2p: minor cleanup + update router options (#6353 )	4 years ago
Nate Williams	b517dd5685	Expose getter for txIndexer (#6327 )	4 years ago
Sam Kleinman	0f41f7465c	p2p: extend e2e tests for new p2p framework (#6323 )	4 years ago
Sam Kleinman	6d9372bd39	test: improve cleanup for data and disk use (#6311 )	4 years ago
Sam Kleinman	d0b513c182	p2p: filter peers by IP address and ID (#6300 )	4 years ago
Sam Kleinman	3ed8f14bf9	p2p: connect max inbound peers configuration to new router (#6296 )	4 years ago
Aleksandr Bezobchuk	a554005136	p2p: revised router message scheduling (#6126 )	4 years ago
Aleksandr Bezobchuk	003f394512	rpc: index block events to support block event queries (#6226 )	4 years ago
Callum Waters	9f7051d38a	node: implement tendermint modes (#6241 ) Co-authored-by: dongsam <dongsamb@gmail.com> Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com> Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>	4 years ago
Marko	efd2fde474	privval: add ctx to privval interface (#6240 ) ## Description - Add `context.Context` to Privval interface This pr does not introduce context into our custom privval connection protocol because this will be removed in the next release. When this pr is released.	4 years ago

1 2 3 4 5 ...

506 Commits (f858ebeb882f7cc8e73136d972187bd52ddebb1b)