See #5936 and #5938 for background.
The plan was initially to have `DialNext()` and `EvictNext()` return a channel. However, implementing this became unnecessarily complicated and error-prone. As an example, the channel would be both consumed and populated (via method calls) by the same driving method (e.g. `Router.dialPeers()`) which could easily cause deadlocks where a method call blocked while sending on the channel that the caller itself was responsible for consuming (but couldn't since it was busy making the method call). It would also require a set of goroutines in the peer manager that would interact with the goroutines in the router in non-obvious ways, and fully populating the channel on startup could cause deadlocks with other startup tasks. Several issues like these made the solution hard to reason about.
I therefore simply made `DialNext()` and `EvictNext()` block until the next peer was available, using internal triggers to wake these methods up in a non-blocking fashion when any relevant state changes occurred. This proved much simpler to reason about, since there are no goroutines in the peer manager (except for trivial retry timers), nor any blocking channel sends, and it instead relies entirely on the existing goroutine structure of the router for concurrency. This also happens to be the same pattern used by the `Transport.Accept()` API, following Go stdlib conventions, so all router goroutines end up using a consistent pattern as well.
Co-authored-by: Emmanuel T Odeke <emmanuel@orijtech.com>
Closes#5907
- add init-corpus to blockchain reactor
- remove validator-set FromBytes test
now that we have proto, we don't need to test it! bye amino
- simplify mempool test
do we want to test remote ABCI app?
- do not recreate mux on every crash in jsonrpc test
- update p2p pex reactor test
- remove p2p/listener test
the API has changed + I did not understand what it's tested anyway
- update secretconnection test
- add readme and makefile
- list inputs in readme
- add nightly workflow
- remove blockchain fuzz test
EncodeMsg / DecodeMsg no longer exist
Fixes#5941.
Not entirely sure that this will fix the problem (couldn't reproduce), but in any case this is an artifact of a hack in the P2P transport refactor to make it work with the legacy P2P stack, and will be removed when the refactor is done anyway.
The `proto-gen-docker` target didn't pull an updated Docker image, and would use a local image if present which could be outdated and produce wrong results.
This improves the prototype peer manager by:
* Exporting `PeerManager`, making it accessible by e.g. reactors.
* Replacing `Router.SubscribePeerUpdates()` with `PeerManager.Subscribe()`.
* Tracking address/peer connection statistics, and retrying dial failures with exponential backoff.
* Prioritizing peers, with persistent peers configuration.
* Limiting simultaneous connections.
* Evicting peers and upgrading to higher-priority peers.
* Tracking peer heights, as a workaround for legacy shared peer state APIs.
This is getting to a point where we need to determine precise semantics and implement tests, so we should figure out whether it's a reasonable abstraction that we want to use. The main questions are around the API model (i.e. synchronous method calls with the router polling the manager, vs. an event-driven model using channels, vs. the peer manager calling methods on the router to connect/disconnect peers), and who should have the responsibility of managing actual connections (currently the router, while the manager only tracks peer state).
Conflicting votes are now sent to the evidence pool to form duplicate vote evidence only once
the height of the evidence is finished and the time of the block finalised.
This adds a prototype peer lifecycle manager, `peerManager`, which stores peer data in an internal `peerStore`. The overall idea here is to have methods for peer lifecycle events which exchange a very narrow subset of peer data, and to keep all of the peer metadata (i.e. the `peerInfo` struct) internal, to decouple this from the router and simplify concurrency control. See `peerManager` GoDoc for more information.
The router is still responsible for actually dialing and accepting peer connections, and routing messages across them, but the peer manager is responsible for determining which peers to dial next, preventing multiple connections being established for the same peer (e.g. both inbound and outbound), and making sure we don't dial the same peer several times in parallel. Later it will also track retries and exponential backoff, as well as peer and address quality. It also assumes responsibility for peer updates subscriptions.
It's a bit unclear to me whether we want the peer manager to take on the responsibility of actually dialing and accepting connections as well, or if it should only be tracking peer state for the router while the router is responsible for all transport concerns. Let's revisit this later.
Bumps [vuepress-theme-cosmos](https://github.com/cosmos/vuepress-theme-cosmos) from 1.0.179 to 1.0.180.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a href="https://github.com/cosmos/vuepress-theme-cosmos/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Bumps [github.com/stretchr/testify](https://github.com/stretchr/testify) from 1.6.1 to 1.7.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/stretchr/testify/releases">github.com/stretchr/testify's releases</a>.</em></p>
<blockquote>
<h2>Minor improvements and bug fixes</h2>
<p>Minor feature improvements and bug fixes</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="acba37e5db"><code>acba37e</code></a> Only use repeatability if no repeatability left</li>
<li><a href="eb8c41ec07"><code>eb8c41e</code></a> Add more tests to mock package</li>
<li><a href="a5830c56d3"><code>a5830c5</code></a> Extract method to evaluate closest match</li>
<li><a href="1962448488"><code>1962448</code></a> Use Repeatability as tie-breaker for closest match</li>
<li><a href="92707c0b2d"><code>92707c0</code></a> Fixed the link to not point to assert only</li>
<li><a href="05dd0b2b35"><code>05dd0b2</code></a> Updated the readme to point to pkg.dev</li>
<li><a href="c26b7f39f8"><code>c26b7f3</code></a> Update assertions.go</li>
<li><a href="8fb4b2442e"><code>8fb4b24</code></a> [Fix] The most recent changes to golang/protobuf breaks the spew Circular dat...</li>
<li><a href="dc8af7208c"><code>dc8af72</code></a> add generated code for positive/negative assertion</li>
<li><a href="1544508911"><code>1544508</code></a> add assert positive/negative</li>
<li>Additional commits viewable in <a href="https://github.com/stretchr/testify/compare/v1.6.1...v1.7.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Early but functional prototype of the new `p2p.Router`, see its GoDoc comment for details on how it works. Expect much of this logic to change and improve as we evolve the new P2P stack.
There is a simple test that sets up an in-memory network of four routers with reactors and passes messages between them, but otherwise no exhaustive tests since this is very much a work-in-progress.
E2E tests often fail due to fast sync stalls causing the validator to miss signing blocks. This increases the tolerance for missed signatures to 2/3 to allow validators to spend more time starting up.
#5852 fixed an issue with error propagation in `os.EnsureDir()`. However, this function is basically identical to `os.MkdirAll()`, and can be replaced entirely with a call to it. We keep the function for backwards compatibility.
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Marko
Anton Kaliaev
Erik Grinaker
odidev
Aleksandr Bezobchuk
Jack Yeh
Tess Rinearson
Callum
dependabot[bot]