Closes: #4530
This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.
* rpc/client: do not pass height param if height ptr is nil
* rpc/core: validate incoming evidence!
* only accept ConflictingHeadersEvidence if one
of the headers is committed from this full node's perspective
This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.
* swap CommitSig with Vote in LunaticValidatorEvidence
Vote is needed to validate signature
* no need to embed client
http is a provider and should not be used as a client
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* proto: minor linting
minor linting after working with the proto files in the sdk.
there is no logic change just spacing fixes
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* hardcore linting
* proto: add buf and protogen script
- add buf with minimal changes
- add protogen script to easier generate proto files
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add protoc needs
* add some needed shell cmds
* remove buf from tools as it is not needed everytime
* add proto lint and breakage to ci
* add section in changelog and upgrading files
* address pr comments
* remove space in circle config
* remove spaces in makefile comment
* add section on contributing on how to work with proto
* bump buf to 0.7
* test bufbuild image
* test install make in bufbuild image
* revert to tendermintdev image
* Update Makefile
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* libs/common: Refactor libs/common 01
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* regenerate proto files, move intslice to where its used
* update kv.KVPair(s) to kv.Pair(s)
* add changelog entry
* make intInSlice private
Fixes#3986
This pull request is prefixing all the types in proto to avoid conflict.
When a go application is using Tendermint as a library and also define similar types in gogo proto some conflicts might occur (as types is a common package in go).
By prefixing the types with tendermint, this highly reduces the risk of conflicts.
BREAKING CHANGE.
This modification breaks the ABCI Application endpoint.
What was accessible before with `/types.ABCIApplication/Flush` is now accessible with `/tendermint.abci.types.ABCIApplication/Flush`.
* Removal of TotalTx & NumTx
- Removed totalTx and numTx
closes#2521
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* abci proto changes
* proto number fix
* txfilter_test fix
* comments on PR
* further changes
* bring back metrics
* fix indexer
* fix TestBlockMaxDataBytes and TestBlockMaxDataBytesUnknownEvidence
* indexer service back to header
* statistics.go fix
* fix ci
* listen for blocks, not headers
to be able to record txs throughput
* fix TestNetworkNewBlock
* fix tests
* fix tests in types package
* fixes after Anton's review
* fix tests
* bring back `consensus_total_txs` metric
I mistakenly thought it was removed.
* improve changelog
* remove LastBlockTotalTx from state
* docs: remove getNumTxs from BeginBlock Java example
As per #2127, this refactors the RequestCheckTx ProtoBuf struct to allow for a flag indicating whether a query is a recheck or not (and allows for possible future, more nuanced states).
In order to pass this extended information through to the ABCI app, the proxy.AppConnMempool (and, for consistency, the proxy.AppConnConsensus) interface seems to need to be refactored along with abcicli.Client.
And, as per this comment, I've made the following modification to the protobuf definition for the RequestCheckTx structure:
enum CheckTxType {
New = 0;
Recheck = 1;
}
message RequestCheckTx {
bytes tx = 1;
CheckTxType type = 2;
}
* Refactor ABCI CheckTx to notify of recheck
As per #2127, this refactors the `RequestCheckTx` ProtoBuf struct to allow for:
1. a flag indicating whether a query is a recheck or not (and allows for
possible future, more nuanced states)
2. an `additional_data` bytes array to provide information for those more
nuanced states.
In order to pass this extended information through to the ABCI app, the
`proxy.AppConnMempool` (and, for consistency, the
`proxy.AppConnConsensus`) interface seems to need to be refactored.
Commits:
* Fix linting issue
* Add CHANGELOG_PENDING entry
* Remove extraneous explicit initialization
* Update ABCI spec doc to include new CheckTx params
* Rename method param for consistency
* Rename CheckTxType enum values and remove additional_data param
## PR
This PR introduces a fundamental breaking change to the structure of ABCI response and tx tags and the way they're processed. Namely, the SDK can support more complex and aggregated events for distribution and slashing. In addition, block responses can include duplicate keys in events.
Implement new Event type. An event has a type and a list of KV pairs (ie. list-of-lists). Typical events may look like:
"rewards": [{"amount": "5000uatom", "validator": "...", "recipient": "..."}]
"sender": [{"address": "...", "balance": "100uatom"}]
The events are indexed by {even.type}.{even.attribute[i].key}/.... In this case a client would subscribe or query for rewards.recipient='...'
ABCI response types and related types now include Events []Event instead of Tags []cmn.KVPair.
PubSub logic now publishes/matches against map[string][]string instead of map[string]string to support duplicate keys in response events (from #1385). A match is successful if the value is found in the slice of strings.
closes: #1859closes: #2905
## Commits:
* Implement Event ABCI type and updates responses to use events
* Update messages_test.go
* Update kvstore.go
* Update event_bus.go
* Update subscription.go
* Update pubsub.go
* Update kvstore.go
* Update query logic to handle slice of strings in events
* Update Empty#Matches and unit tests
* Update pubsub logic
* Update EventBus#Publish
* Update kv tx indexer
* Update godocs
* Update ResultEvent to use slice of strings; update RPC
* Update more tests
* Update abci.md
* Check for key in validateAndStringifyEvents
* Fix KV indexer to skip empty keys
* Fix linting errors
* Update CHANGELOG_PENDING.md
* Update docs/spec/abci/abci.md
Co-Authored-By: Federico Kunze <31522760+fedekunze@users.noreply.github.com>
* Update abci/types/types.proto
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update docs/spec/abci/abci.md
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update libs/pubsub/query/query.go
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update match function to match if ANY value matches
* Implement TestSubscribeDuplicateKeys
* Update TestMatches to include multi-key test cases
* Update events.go
* Update Query interface godoc
* Update match godoc
* Add godoc for matchValue
* DRY-up tx indexing
* Return error from PublishWithEvents in EventBus#Publish
* Update PublishEventNewBlockHeader to return an error
* Fix build
* Update events doc in ABCI
* Update ABCI events godoc
* Implement TestEventBusPublishEventTxDuplicateKeys
* Update TestSubscribeDuplicateKeys to be table-driven
* Remove mod file
* Remove markdown from events godoc
* Implement TestTxSearchDeprecatedIndexing test
Also
- init substructures to avoid panic in pb2tm.ConsensusParams
Before: if csp.Block is nil and we later try to access/write to it,
we'll panic.
After: if csp.Block is nil and we later try to access/write to it,
there'll be no panic.
* make BlockTimeIota a consensus parameter, not a locally configurable option
Refs #2920
* make TimeIota int64 ms
Refs #2920
* update Gopkg.toml
* fixes after Ethan's review
* fix TestRemoteSignerProposalSigningFailed
* update changelog
* types: add Version to Header
* abci: add Version to Header
* state: add Version to State
* node: check software and state protocol versions match
* update changelog
* docs/spec: update for versions
* state: more tests
* remove TODOs
* remove empty test
* follow up to removing some consensus params Refs #2382
* change args type to int64 in state#makeParams
* make valsCount and evidenceCount ints again
* MaxEvidenceBytesPerBlock: include magic number in godoc
* [spec] creating a proposal
* test state#TxFilter
* panic if MaxDataBytes is less than 0
* fixes after review
* use amino#UvarintSize to calculate overhead
0c74291f3b/encoder.go (L85-L90)
* avoid cyclic imports
* you can do better Go, come on
* remove testdouble package
* remove ConsensusParams.TxSize and ConsensusParams.BlockGossip
Refs #2347
* block part size is now fixed
Refs #2347
* use max data size, not max bytes for tx limit
Refs #2347
Now that Tendermint Amino will be compatible with proto3, the Header in ABCI
should exactly match the Tendermint header - they will then be encoded
identically in ABCI and in Tendermint Core.
Refs #265
This PR changes ABCI time format from int64 (Unix seconds) to WKT (WellKnownType) google.protobuf.Timestamp.
Refs #1857
Reasons:
better precision
standard DT for proto
* update Gopkg.lock
* [makefile] remove extra grep
- go list excludes vendor by default now
* proto3 timestamp
* [docs/abci-spec] note about serialisation format
* make time non-nullable
Refs #1861
We don't use the fee field and its likely just confusing.
We can add backwards compatible priority (instead of fee) later.
Note priority is better than fee because it lets the app do the math on how to rank order transactions, rather than forcing that into tendermint (ie. if we return fee, priority would be fee/gas)
Diep Pham
Anton Kaliaev
Erik Grinaker
Marko
Anthony
Thane Thomson
Alexander Bezobchuk
Dev Ojha
Ethan Buchman
Joon
Silas Davis
Zach Ramsay