If we are low on addresses for peering, we need to discover more peers. The
previous behavior would query existing peers; however, if an existing peer
does not participate in peer exchange, then our node will not discover more peers.
This change consults both existing peers as well as seeds when there is a deficit
in address book addresses. This allows for discovering peers though existing channels
as well as via seeds if existing peers do not share addresses.
The node.NewNode method is pretty complex at the moment, an in order to address issues like #3156, we need to simplify the interface for partial node instantiation. In some places, we don't need to build up a full node (like in the node.TestCreateProposalBlock test), but the complexity of such partial instantiation needs to be reduced.
This PR aims to eventually make this easier/simpler.
See also this gist https://gist.github.com/thanethomson/56e1640d057a26186e38ad678a1d114c for some background work done when starting to refactor here.
## Commits:
* [WIP] Refactor node.NewNode to simplify
The `node.NewNode` method is pretty complex at the moment, an in order
to address issues like #3156, we need to simplify the interface for
partial node instantiation. In some places, we don't need to build up a
full node (like in the `node.TestCreateProposalBlock` test), but the
complexity of such partial instantiation needs to be reduced.
This PR aims to eventually make this easier/simpler.
* Refactor state loading and genesis doc provider into state package
* Refactor for clarity of return parameters
* Fix incorrect capitalization of error messages
* Simplify extracted functions' names
* Document optionally-prefixed functions
* Refactor optionallyFastSync for clarity of separation of concerns
* Restructure function for early return
* Restructure function for early return
* Remove dependence on deprecated panic functions
* refactor code a bit more
plus, expose PEXReactor on node
* align logger names
* add a changelog entry
* align logger names 2
* add a note about PEXReactor returning nil
* Remove deprecated PanicXXX functions from codebase
As per discussion over
[here](https://github.com/tendermint/tendermint/pull/3456#discussion_r278423492),
we need to remove these `PanicXXX` functions and eliminate our
dependence on them. In this PR, each and every `PanicXXX` function call
is replaced with a simple `panic` call.
* add a changelog entry
Should fix#3451, #2723 and #3317.
Test TestResetTimeoutPrecommitUponNewHeight is simplified so it reduces a risk of timeout failure. Furthermore, timeout we wait for TimeoutEvents is increased, and the timeout value is more precisely computed. This should hopefully decrease a chance of non-deterministic test failures.
This assertion is problematic to ensure consistently due to dependency on scheduler. On the other hand, if I am not wrong, order in which messages are read from the channel respects order in which messages are written. Therefore, process will receive 2f+1 precommits that are not all for v (one is for nil) so TriggeredTimeoutPrecommit would be set to true. So we don't need to assert it. I know that it would be better to still assert to it but I don't know how to do it without sleep and that is ugly and is causing us nondeterministic failures.
* check every block appHash
Fixes#3460
Not really needed, but it would detect if the app changed in a way it
shouldn't have.
* add a changelog entry
* no need to return an error if we panic
* rename methods
* rename methods once again
* add a test
* correct error msg
plus fix a few go-lint warnings
* better panic msg
Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213).
* Add JSON RPC batching for client and server
As per #3213, this adds support for [JSON RPC batch requests and
responses](https://www.jsonrpc.org/specification#batch).
* Add additional checks to ensure client responses are the same as results
* Fix case where a notification is sent and no response is expected
* Add test to check that JSON RPC notifications in a batch are left out in responses
* Update CHANGELOG_PENDING.md
* Update PR number now that PR has been created
* Make errors start with lowercase letter
* Refactor batch functionality to be standalone
This refactors the batching functionality to rather act in a standalone
way. In light of supporting concurrent goroutines making use of the same
client, it would make sense to have batching functionality where one
could create a batch of requests per goroutine and send that batch
without interfering with a batch from another goroutine.
* Add examples for simple and batch HTTP client usage
* Check errors from writer and remove nolinter directives
* Make error strings start with lowercase letter
* Refactor examples to make them testable
* Use safer deferred shutdown for example Tendermint test node
* Recompose rpcClient interface from pre-existing interface components
* Rename WaitGroup for brevity
* Replace empty ID string with request ID
* Remove extraneous test case
* Convert first letter of errors.Wrap() messages to lowercase
* Remove extraneous function parameter
* Make variable declaration terse
* Reorder WaitGroup.Done call to help prevent race conditions in the face of failure
* Swap mutex to value representation and remove initialization
* Restore empty JSONRPC string ID in response to prevent nil
* Make JSONRPCBufferedRequest private
* Revert PR hard link in CHANGELOG_PENDING
* Add client ID for JSONRPCClient
This adds code to automatically generate a randomized client ID for the
JSONRPCClient, and adds a check of the IDs in the responses (if one was
set in the requests).
* Extract response ID validation into separate function
* Remove extraneous comments
* Reorder fields to indicate clearly which are protected by the mutex
* Refactor for loop to remove indexing
* Restructure and combine loop
* Flatten conditional block for better readability
* Make multi-variable declaration slightly more readable
* Change for loop style
* Compress error check statements
* Make function description more generic to show that we support different protocols
* Preallocate memory for request and result objects
* use dialPeer function in a seed mode
Fixes#3532
by storing a number of attempts we've tried to connect in-memory and
removing the address from addrbook when number of attempts > 16
What happened:
New code was supposed to fall back to last height changed when/if it
failed to find validators at checkpoint height (to make release
non-breaking).
But because we did not check if validator set is empty, the fall back
logic was never executed => resulting in LoadValidators returning an
empty validator set for cases where `lastStoredHeight` is checkpoint
height (i.e. almost all heights if the application does not change
validator set often).
How it was found:
one of our users - @sunboshan reported a bug here
https://github.com/tendermint/tendermint/pull/3537#issuecomment-482711833
* use last height changed in validator set is empty
* add a changelog entry
* rpc: store validator info periodly
* increase ValidatorSetStoreInterval
also
- unexpose it
- add a comment
- refactor code
- add a benchmark, which shows that 100000 results in ~ 100ms to get 100
validators
* make the change non-breaking
* expand comment
* rename valSetStoreInterval to valSetCheckpointInterval
* change the panic msg
* add a test and changelog entry
* update changelog entry
* update changelog entry
* add a link to PR
* fix test
* Update CHANGELOG_PENDING.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* update comment
* use MaxInt64 func
ListOfKnownAddresses is removed
panic if addrbook size is less than zero
CrawlPeers does not attempt to connect to existing or peers we're currently dialing
various perf. fixes
improved tests (though not complete)
move IsDialingOrExistingAddress check into DialPeerWithAddress (Fixes#2716)
* addrbook: preallocate memory when saving addrbook to file
* addrbook: remove oldestFirst struct and check for ID
* oldestFirst replaced with sort.Slice
* ID is now mandatory, so no need to check
* addrbook: remove ListOfKnownAddresses
GetSelection is used instead in seed mode.
* addrbook: panic if size is less than 0
* rewrite addrbook#saveToFile to not use a counter
* test AttemptDisconnects func
* move IsDialingOrExistingAddress check into DialPeerWithAddress
* save and cleanup crawl peer data
* get rid of DefaultSeedDisconnectWaitPeriod
* make linter happy
* fix TestPEXReactorSeedMode
* fix comment
* add a changelog entry
* Apply suggestions from code review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* rename ErrDialingOrExistingAddress to ErrCurrentlyDialingOrExistingAddress
* lowercase errors
* do not persist seed data
pros:
- no extra files
- less IO
cons:
- if the node crashes, seed might crawl a peer too soon
* fixes after Ethan's review
* add a changelog entry
* we should only consult Switch about peers
checking addrbook size does not make sense since only PEX reactor uses
it for dialing peers!
https://github.com/tendermint/tendermint/pull/3011#discussion_r270948875
* docs: fix broken links (#3482)
A bunch of links were broken in the documentation s they included the
`docs` prefix.
* Update CHANGELOG_PENDING
* docs: switch to relative links for github compatitibility (#3482)
I think it's nice when the Client interface has all the methods. If someone does not need a particular method/set of methods, she can use individual interfaces (e.g. NetworkClient, MempoolClient) or write her own interface.
technically breaking
Fixes#3458
Closes#1798
This is done by making every mempool tx maintain a list of peers who its received the tx from. Instead of using the 20byte peer ID, it instead uses a local map from peerID to uint16 counter, so every peer adds 2 bytes. (Word aligned to probably make it 8 bytes)
This also required resetting the callback function on every CheckTx. This likely has performance ramifications for instruction caching. The actual setting operation isn't costly with the removal of defers in this PR.
* Make the mempool not gossip txs back to peers its received it from
* Fix adversarial memleak
* Don't break interface
* Update changelog
* Forgot to add a mtx
* forgot a mutex
* Update mempool/reactor.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Update mempool/mempool.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Use unknown peer ID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* fix compilation
* use next wait chan logic when skipping
* Minor fixes
* Add TxInfo
* Add reverse map
* Make activeID's auto-reserve 0
* 0 -> UnknownPeerID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Switch to making the normal case set a callback on the reqres object
The recheck case is still done via the global callback, and stats
are also set via global callback
* fix merge conflict
* Addres comments
* Add cache tests
* add cache tests
* minor fixes
* update metrics in reqResCb and reformat code
* goimport -w mempool/reactor.go
* mempool: update memTx senders
I had to introduce txsMap for quick mempoolTx lookups.
* change senders type from []uint16 to sync.Map
Fixes DATA RACE:
```
Read at 0x00c0013fcd3a by goroutine 183:
github.com/tendermint/tendermint/mempool.(*MempoolReactor).broadcastTxRoutine()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:195 +0x3c7
Previous write at 0x00c0013fcd3a by D[2019-02-27|10:10:49.058] Read PacketMsg switch=3 peer=35bc1e3558c182927b31987eeff3feb3d58a0fc5@127.0.0.1
:46552 conn=MConn{pipe} packet="PacketMsg{30:2B06579D0A143EB78F3D3299DE8213A51D4E11FB05ACE4D6A14F T:1}"
goroutine 190:
github.com/tendermint/tendermint/mempool.(*Mempool).CheckTxWithInfo()
/go/src/github.com/tendermint/tendermint/mempool/mempool.go:387 +0xdc1
github.com/tendermint/tendermint/mempool.(*MempoolReactor).Receive()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:134 +0xb04
github.com/tendermint/tendermint/p2p.createMConnection.func1()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:374 +0x25b
github.com/tendermint/tendermint/p2p/conn.(*MConnection).recvRoutine()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:599 +0xcce
Goroutine 183 (running) created at:
D[2019-02-27|10:10:49.058] Send switch=2 peer=1efafad5443abeea4b7a8155218e4369525d987e@127.0.0.1:46193 channel=48 conn=MConn{pipe} m
sgBytes=2B06579D0A146194480ADAE00C2836ED7125FEE65C1D9DD51049
github.com/tendermint/tendermint/mempool.(*MempoolReactor).AddPeer()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:105 +0x1b1
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:683 +0x13b
github.com/tendermint/tendermint/p2p.(*Switch).addPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:650 +0x585
github.com/tendermint/tendermint/p2p.(*Switch).addPeerWithConnection()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:145 +0x939
github.com/tendermint/tendermint/p2p.Connect2Switches.func2()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:109 +0x50
I[2019-02-27|10:10:49.058] Added good transaction validator=0 tx=43B4D1F0F03460BD262835C4AA560DB860CFBBE85BD02386D83DAC38C67B3AD7 res="&{CheckTx:gas_w
anted:1 }" height=0 total=375
Goroutine 190 (running) created at:
github.com/tendermint/tendermint/p2p/conn.(*MConnection).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:210 +0x313
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:179 +0x56
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).Start()
<autogenerated>:1 +0x43
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
```
* explain the choice of a map DS for senders
* extract ids pool/mapper to a separate struct
* fix literal copies lock value from senders: sync.Map contains sync.Mutex
* use sync.Map#LoadOrStore instead of Load
* fixes after Ismail's review
* rename resCbNormal to resCbFirstTime
* p2p: refactor Switch#Broadcast func
- call wg.Add only once
- do not call peers.List twice!
* bad for perfomance
* peers list can change in between calls!
Refs #3306
* p2p: use time.Ticker instead of RepeatTimer
no need in RepeatTimer since we don't Reset them
Refs #3306
* libs/common: remove RepeatTimer (also TimerMaker and Ticker interface)
"ancient code that’s caused no end of trouble" Ethan
I believe there's much simplier way to write a ticker than can be reset
https://medium.com/@arpith/resetting-a-ticker-in-go-63858a2c17ec
* limit number of /subscribe clients and queries per client
Add the following config variables (under [rpc] section):
* max_subscription_clients
* max_subscriptions_per_client
* timeout_broadcast_tx_commit
Fixes#2826
new HTTPClient interface for subscriptions
finalize HTTPClient events interface
remove EventSubscriber
fix data race
```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0
Previous write at 0x00c000a36060 by goroutine 132:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 129 (running) created at:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 132 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
==================
```
lite client works (tested manually)
godoc comments
httpclient: do not close the out channel
use TimeoutBroadcastTxCommit
no timeout for unsubscribe
but 1s Local (5s HTTP) timeout for resubscribe
format code
change Subscribe#out cap to 1
and replace config vars with RPCConfig
TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout
rpc: Context as first parameter to all functions
reformat code
fixes after my own review
fixes after Ethan's review
add test stubs
fix config.toml
* fixes after manual testing
- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed
* fixes after Ismail's review
* Update rpc/grpc/grpc_test.go
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
Also
- init substructures to avoid panic in pb2tm.ConsensusParams
Before: if csp.Block is nil and we later try to access/write to it,
we'll panic.
After: if csp.Block is nil and we later try to access/write to it,
there'll be no panic.
Fixes: #3378
* Add stats to cleveldb implementation
* update changelog
* remote TODO
also
- sort keys
- preallocate memory
* fix const initializer []string literal is not a constant
* add test
* make BlockTimeIota a consensus parameter, not a locally configurable option
Refs #2920
* make TimeIota int64 ms
Refs #2920
* update Gopkg.toml
* fixes after Ethan's review
* fix TestRemoteSignerProposalSigningFailed
* update changelog
* libs/common: TrapSignal accepts logger as a first parameter
and does not block anymore
* previously it was dumping "captured ..." msg to os.Stdout
* TrapSignal should not be responsible for blocking thread of execution
Refs #3238
* exit with zero (0) code upon receiving SIGTERM/SIGINT
Refs #3238
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* bound mempool memory usage
Closes#3079
* rename SizeBytes to TxsTotalBytes
and other small fixes after Zarko's review
* rename MaxBytes to MaxTxsTotalBytes
* make ErrMempoolIsFull more informative
* expose mempool's txs_total_bytes via RPC
* test full response
* fixes after Ethan's review
* config: rename mempool.size to mempool.max_txs
https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004
* test more cases
https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532
* simplify test
* Revert "config: rename mempool.size to mempool.max_txs"
This reverts commit 39bfa36961.
* rename count back to n_txs
to make a change non-breaking
* rename max_txs_total_bytes to max_txs_bytes
* format code
* fix TestWALPeriodicSync
The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.
* Apply suggestions from code review
* reject the shared secret if is all zeros in case the blacklist was not
sufficient
* Add test that verifies lower order pub-keys are rejected at the DH step
* Update changelog
* fix typo in test-comment
* green pubsub tests :OK:
* get rid of clientToQueryMap
* Subscribe and SubscribeUnbuffered
* start adapting other pkgs to new pubsub
* nope
* rename MsgAndTags to Message
* remove TagMap
it does not bring any additional benefits
* bring back EventSubscriber
* fix test
* fix data race in TestStartNextHeightCorrectly
```
Write at 0x00c0001c7418 by goroutine 796:
github.com/tendermint/tendermint/consensus.TestStartNextHeightCorrectly()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:1296 +0xad
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Previous read at 0x00c0001c7418 by goroutine 858:
github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1631 +0x1366
github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1476 +0x8f
github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg()
/go/src/github.com/tendermint/tendermint/consensus/state.go:667 +0xa1e
github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine()
/go/src/github.com/tendermint/tendermint/consensus/state.go:628 +0x794
Goroutine 796 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
testing.runTests.func1()
/usr/local/go/src/testing/testing.go:1119 +0xa8
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
testing.runTests()
/usr/local/go/src/testing/testing.go:1117 +0x4ee
testing.(*M).Run()
/usr/local/go/src/testing/testing.go:1034 +0x2ee
main.main()
_testmain.go:214 +0x332
Goroutine 858 (running) created at:
github.com/tendermint/tendermint/consensus.(*ConsensusState).startRoutines()
/go/src/github.com/tendermint/tendermint/consensus/state.go:334 +0x221
github.com/tendermint/tendermint/consensus.startTestRound()
/go/src/github.com/tendermint/tendermint/consensus/common_test.go:122 +0x63
github.com/tendermint/tendermint/consensus.TestStateFullRound1()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:255 +0x397
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
```
* fixes after my own review
* fix formatting
* wait 100ms before kicking a subscriber out
+ a test for indexer_service
* fixes after my second review
* no timeout
* add changelog entries
* fix merge conflicts
* fix typos after Thane's review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* reformat code
* rewrite indexer service in the attempt to fix failing test
https://github.com/tendermint/tendermint/pull/3227/#issuecomment-462316527
* Revert "rewrite indexer service in the attempt to fix failing test"
This reverts commit 0d9107a098.
* another attempt to fix indexer
* fixes after Ethan's review
* use unbuffered channel when indexing transactions
Refs https://github.com/tendermint/tendermint/pull/3227#discussion_r258786716
* add a comment for EventBus#SubscribeUnbuffered
* format code
ref: [#3010 (comment)](https://github.com/tendermint/tendermint/issues/3010#issuecomment-464287627)
> I tried searching for code where we authenticate a peer against its NetAddress.ID and couldn't find it. I don't see a reason to switch to Noise, but a need to ensure that the node's ID is authenticated e.g. after dialing from the address book.
* p2p: check secret conn id matches dialed id
* Fix all p2p tests & make code compile
* add simple test for dialing with wrong ID
* update changelog
* address review comments
* yet another place where to use IDAddressString and fix
testSetupMultiplexTransport
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* rpc/net_info: change RemoteIP type from net.IP to String
Before:
"AAAAAAAAAAAAAP//rB8ktw=="
which is amino-encoded net.IP byte slice
After:
"192.0.2.1"
Fixes#3251
* rpc/net_info: non-empty response in docs
Ivan Kushmantsev
JamesRay
Roman Shtylman
Thane Thomson
Zarko Milosevic
Greg Hill
Anton Kaliaev
Ismail Khoffi
Ethan Buchman
zjubfd
Greg Szabo
Sean Braithwaite
Dev Ojha
srmo
mircea-c
Jack Zampolin
Alessio Treglia
Alexander Bezobchuk