This pull request merges in the changes for implementing Proposer-based timestamps into `master`. The power was primarily being done in the `wb/proposer-based-timestamps` branch, with changes being merged into that branch during development. This pull request represents an amalgamation of the changes made into that development branch. All of the changes that were placed into that branch have been cleanly rebased on top of the latest `master`. The changes compile and the tests pass insofar as our tests in general pass.
### Note To Reviewers
These changes have been extensively reviewed during development. There is not much new here. In the interest of making effective use of time, I would recommend against trying to perform a complete audit of the changes presented and instead examine for mistakes that may have occurred during the process of rebasing the changes. I gave the complete change set a first pass for any issues, but additional eyes would be very appreciated.
In sum, this change set does the following:
closes#6942
merges in #6849
This change has two main effects:
1. Remove most of the Async methods from the abci.Client interface.
Remaining are FlushAsync, CommitTxAsync, and DeliverTxAsync.
2. Rename the synchronous methods to remove the "Sync" suffix.
The rest of the change is updating the implementations, subsets, and mocks of
the interface, along with the call sites that point to them.
* Fix stringly-typed mock stubs.
* Rename helper method.
* build(deps): Bump github.com/adlio/schema from 1.1.15 to 1.2.2
Bumps [github.com/adlio/schema](https://github.com/adlio/schema) from 1.1.15 to 1.2.2.
- [Release notes](https://github.com/adlio/schema/releases)
- [Commits](https://github.com/adlio/schema/compare/v1.1.15...v1.2.2)
---
updated-dependencies:
- dependency-name: github.com/adlio/schema
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* Work around API changes in the migrator package.
A recent update inadvertently broke the API by changing the receiver types of
the methods without updating the constructor.
See: https://github.com/adlio/schema/issues/13
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
Some of our tests were creating a psql event sink and expecting
it to report (or not report) certain kinds of errors. These tests
were ill-founded in a couple of ways:
1. Tests that required the Postgres driver were not loading it.
This led to spurious successes on tests that wanted "some error"
from the sink constructor, but didn't exercise the right path.
2. Tests that wanted a Postgres sink to succeed without a database.
These tests "passed" because they weren't actually establishing a
connection to the database, but if they had would have failed for
the lack of one.
To fix this:
- Load the postgres driver in tests that need it.
- Verify connectivity before reporting successful creation of a PSQL event sink.
- Remove tests that wanted a psql sink without a database, since that case
is already tested elsewhere.
Rework the implementation of event query parsing and execution to
improve performance and reduce memory usage.
Previous memory and CPU profiles of the pubsub service showed query
processing as a significant hotspot. While we don't have evidence that
this is visibly hurting users, fixing it is fairly easy and self-contained.
Updates #6439.
Typical benchmark results comparing the original implementation (PEG) with the reworked implementation (Custom):
```
TEST TIME/OP BYTES/OP ALLOCS/OP SPEEDUP MEM SAVING
BenchmarkParsePEG-12 51716 ns 526832 27
BenchmarkParseCustom-12 2167 ns 4616 17 23.8x 99.1%
BenchmarkMatchPEG-12 3086 ns 1097 22
BenchmarkMatchCustom-12 294.2 ns 64 3 10.5x 94.1%
```
Components:
* Add a basic parsing benchmark.
* Move the original query implementation to a subdirectory.
* Add lexical scanner for Query expressions.
* Add a parser for Query expressions.
* Implement query compiler.
* Add test cases based on OpenAPI examples.
* Add MustCompile to replace the original MustParse, and update usage.
This is a very small change, but removes a method from the
`service.Service` interface (a win!) and forces callers to explicitly
pass loggers in to objects during construction rather than (later)
injecting them. There's not a real need for this kind of lazy
construction of loggers, and I think a decent potential for confusion
for mutable loggers.
The main concern I have is that this changes the constructor API for
ABCI clients. I think this is fine, and I suspect that as we plumb
contexts through, and make changes to the RPC services there'll be a
number of similar sorts of changes to various (quasi) public
interfaces, which I think we should welcome.
I think calling os.Exit at arbitrary points is _bad_ and is good to
delete. I think panics in the case of data courruption have a chance
of providing useful information.
This follows the same model as we did in the p2p package.
Rework the indexer service constructor to take a struct of arguments,
that makes it easier to construct the optional settings.
Deprecate but do not remove the existing constructor.
Clean up node initialization a little bit.
This is part of the work described by #7156.
Remove "unbuffered subscriptions" from the pubsub service.
Replace them with a dedicated blocking "observer" mechanism.
Use the observer mechanism for indexing.
Add a SubscribeWithArgs method and deprecate the old Subscribe
method. Remove SubscribeUnbuffered entirely (breaking).
Rework the Subscription interface to eliminate exposed channels.
Subscriptions now use a context to manage lifecycle notifications.
Internalize the eventbus package.
This PR adds an initial set of metrics for use ABCI. The initial metrics enable the calculation of timing histograms and call counts for each of the ABCI methods. The metrics are also labeled as either 'sync' or 'async' to determine if the method call was performed using ABCI's `*Async` methods.
An example of these metrics is included here for reference:
```
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0001"} 0
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0004"} 5
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.002"} 12
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.009"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.02"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.1"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.65"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="2"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="6"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="25"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="+Inf"} 13
tendermint_abci_connection_method_timing_sum{chain_id="ci",method="commit",type="sync"} 0.007802058000000001
tendermint_abci_connection_method_timing_count{chain_id="ci",method="commit",type="sync"} 13
```
These metrics can easily be graphed using prometheus's `histogram_quantile(...)` method to pick out a particular quantile to graph or examine. I chose buckets that were somewhat of an estimate of expected range of times for ABCI operations. They start at .0001 seconds and range to 25 seconds. The hope is that this range captures enough possible times to be useful for us and operators.
The code in the Tendermint repository makes heavy use of import aliasing.
This is made necessary by our extensive reuse of common base package names, and
by repetition of similar names across different subdirectories.
Unfortunately we have not been very consistent about which packages we alias in
various circumstances, and the aliases we use vary. In the spirit of the advice
in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports,
his change makes an effort to clean up and normalize import aliasing.
This change makes no API or behavioral changes. It is a pure cleanup intended
o help make the code more readable to developers (including myself) trying to
understand what is being imported where.
Only unexported names have been modified, and the changes were generated and
applied mechanically with gofmt -r and comby, respecting the lexical and
syntactic rules of Go. Even so, I did not fix every inconsistency. Where the
changes would be too disruptive, I left it alone.
The principles I followed in this cleanup are:
- Remove aliases that restate the package name.
- Remove aliases where the base package name is unambiguous.
- Move overly-terse abbreviations from the import to the usage site.
- Fix lexical issues (remove underscores, remove capitalization).
- Fix import groupings to more closely match the style guide.
- Group blank (side-effecting) imports and ensure they are commented.
- Add aliases to multiple imports with the same base package name.
We moved some files further down in the directory structure in #6964, which
caused the relative paths to the mockery wrapper to stop working.
There does not seem to be an obvious way to get the module root as a default
environment variable, so for now I just added the extra up-slashes.
mconcat
Marko
William Banfield
Sam Kleinman
M. J. Fromberger
dependabot[bot]
Callum Waters
Federico Kunze Küllmer
Sharad Chand