A prior change to address accidental DNS lookups introduced the
SocketAddr on peer, which was then used to add it to the addressbook.
Which in turn swallowed the self reported port of the peer, which is
important on a reconnect. This change revives the NetAddress on NodeInfo
which the Peer carries, but now returns an error to avoid nil
dereferencing another issue observed in the past. Additionally we could
potentially address #3532, yet the original problem statemenf of that
issue stands.
As a drive-by optimisation `MarkAsGood` now takes only a `p2p.ID` which
makes it interface a bit stricter and leaner.
ListOfKnownAddresses is removed
panic if addrbook size is less than zero
CrawlPeers does not attempt to connect to existing or peers we're currently dialing
various perf. fixes
improved tests (though not complete)
move IsDialingOrExistingAddress check into DialPeerWithAddress (Fixes#2716)
* addrbook: preallocate memory when saving addrbook to file
* addrbook: remove oldestFirst struct and check for ID
* oldestFirst replaced with sort.Slice
* ID is now mandatory, so no need to check
* addrbook: remove ListOfKnownAddresses
GetSelection is used instead in seed mode.
* addrbook: panic if size is less than 0
* rewrite addrbook#saveToFile to not use a counter
* test AttemptDisconnects func
* move IsDialingOrExistingAddress check into DialPeerWithAddress
* save and cleanup crawl peer data
* get rid of DefaultSeedDisconnectWaitPeriod
* make linter happy
* fix TestPEXReactorSeedMode
* fix comment
* add a changelog entry
* Apply suggestions from code review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* rename ErrDialingOrExistingAddress to ErrCurrentlyDialingOrExistingAddress
* lowercase errors
* do not persist seed data
pros:
- no extra files
- less IO
cons:
- if the node crashes, seed might crawl a peer too soon
* fixes after Ethan's review
* add a changelog entry
* we should only consult Switch about peers
checking addrbook size does not make sense since only PEX reactor uses
it for dialing peers!
https://github.com/tendermint/tendermint/pull/3011#discussion_r270948875
* OriginalAddr -> SocketAddr
OriginalAddr records the originally dialed address for outbound peers,
rather than the peer's self reported address. For inbound peers, it was
nil. Here, we rename it to SocketAddr and for inbound peers, set it to
the RemoteAddr of the connection.
* use SocketAddr
Numerous places in the code call peer.NodeInfo().NetAddress().
However, this call to NetAddress() may perform a DNS lookup if the
reported NodeInfo.ListenAddr includes a name. Failure of this lookup
returns a nil address, which can lead to panics in the code.
Instead, call peer.SocketAddr() to return the static address of the
connection.
* remove nodeInfo.NetAddress()
Expose `transport.NetAddress()`, a static result determined
when the transport is created. Removing NetAddress() from the nodeInfo
prevents accidental DNS lookups.
* fixes from review
* linter
* fixes from review
* mempool: add a safety check, write tests for mempoolIDs
and document 65536 limit in the mempool reactor spec
follow-up to https://github.com/tendermint/tendermint/pull/2778
* rename the test
* fixes after Ismail's review
* close peer's connection to avoid fd leak
Fixes#2967
* rename peer#Addr to RemoteAddr
* fix test
* fixes after Ethan's review
* bring back the check
* changelog entry
* write a test for switch#acceptRoutine
* increase timeouts? :(
* remove extra assertNPeersWithTimeout
* simplify test
* assert number of peers (just to be safe)
* Cleanup in OnStop
* run tests with verbose flag on CircleCI
* spawn a reading routine to prevent connection from closing
* get port from the listener
random port is faster, but often results in
```
panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered]
panic: listen tcp 127.0.0.1:44068: bind: address already in use
goroutine 79 [running]:
testing.tRunner.func1(0xc0001bd600)
/usr/local/go/src/testing/testing.go:792 +0x387
panic(0x974d20, 0xc0001b0500)
/usr/local/go/src/runtime/panic.go:513 +0x1b9
github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...)
/home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28
github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed)
/home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9
github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0)
/home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c
github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600)
/home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58
testing.tRunner(0xc0001bd600, 0xb42038)
/usr/local/go/src/testing/testing.go:827 +0xbf
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:878 +0x353
exit status 2
FAIL github.com/tendermint/tendermint/p2p 0.350s
```
* p2p/conn: FlushStop. Use in pex. Closes#2092
In seed mode, we call StopPeer immediately after Send.
Since flushing msgs to the peer happens in the background,
the peer connection is often closed before the messages are
actually sent out. The new FlushStop method allows all msgs
to first be written and flushed out on the conn before it is closed.
* fix dummy peer
* typo
* fixes from review
* more comments
* ensure pex doesn't call FlushStop more than once
FlushStop is not safe to call more than once,
but we call it from Receive in a go-routine so Receive
doesn't block.
To ensure we only call it once, we use the lastReceivedRequests
map - if an entry already exists, then FlushStop should already have
been called and we can return.
* p2p: NodeInfo is an interface
* (squash) fixes from review
* (squash) more fixes from review
* p2p: remove peerConn.HandshakeTimeout
* p2p: NodeInfo is two interfaces. Remove String()
* fixes from review
* remove test code from peer.RemoteIP()
* p2p: remove peer.OriginalAddr(). See #2618
* use a mockPeer in peer_set_test.go
* p2p: fix testNodeInfo naming
* p2p: remove unused var
* remove testRandNodeInfo
* fix linter
* fix retry dialing self
* fix rpc
We are swapping the exisiting listener implementation with the newly
introduced Transport and its default implementation MultiplexTransport,
removing a large chunk of old connection setup and handling scattered
over the Peer and Switch code. The Switch requires a Transport now and
handles externally passed Peer filters.
* p2p/pex: Allow configured seed nodes to be offline
Previously you couldn't startup tendermint if a seed node was offline.
This now allows you to startup tendermint, as long as all seed node addresses
are formatted correctly. In the event that all seed nodes are down,
and the address book is empty, then it crashes with an informative error msg.
(This case doesn't occur if no seeds were specified)
Closes#1716
* (Squash this) Address melekes' comments
* (squash this) fix package imports
* (squash this) fix pex_reactor comment
* (squash this) add a test case
This is to reduce wait times when initially connecting. This still runs checks
such as whether you still want additional peers.
A test case has been created, which fails if this change is not included.
Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.
Ref discussion: https://github.com/tendermint/tendermint/pull/1966Closes#1956
* new config option for external address to advertise
* if blank, defaults to best guess from listener
* if laddr ip address is also blank, default to IPv4
* config: rename skip_upnp to upnp
Change default option to enable upnp.
Closes#1806
* doc updates
- fix comment and set UPNP to false in TestP2PConfig
- add UPNP to config template
- update changelog
As both configs are concerned with the p2p packaage and PeerConfig is
only used inside of the package there is no good reason to keep the
couple of fields separate, therefore it is collapsed into the more
general P2PConifg. This is a stepping stone towards a setup where the
components inside of p2p do not have any knowledge about the config.
follow-up to #1325
In order to improve the operator experience we want the node to dial
seeds immediately if there are no peers to connect to. Until now the
routine responsible for ensuring peers are connected to would wait
a random amount of time up to 30s (if not configured otherwise).
* expose AuthEnc in the P2P config
if AuthEnc is true, dialed peers must have a node ID in the address and
it must match the persistent pubkey from the secret handshake.
Refs #1157
* fixes after my own review
* fix docs
* fix build failure
```
p2p/pex/pex_reactor_test.go:288:88: cannot use seed.NodeInfo().NetAddress() (type *p2p.NetAddress) as type string in array or slice literal
```
* p2p: introduce peerConn to simplify peer creation
* Introduce `peerConn` containing the known fields of `peer`
* `peer` only created in `sw.addPeer` once handshake is complete and NodeInfo is checked
* Eliminates some mutable variables and makes the code flow better
* Simplifies the `newXxxPeer` funcs
* Use ID instead of PubKey where possible.
* SetPubKeyFilter -> SetIDFilter
* nodeInfo.Validate takes ID
* remove peer.PubKey()
* persistent node ids
* fixes from review
* test: use ip_plus_id.sh more
* fix invalid memory panic during fast_sync test
```
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: panic: runtime error: invalid memory address or nil pointer dereference
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: [signal SIGSEGV: segmentation violation code=0x1 addr=0x20 pc=0x98dd3e]
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]:
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: goroutine 3432 [running]:
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.newOutboundPeerConn(0xc423fd1380, 0xc420933e00, 0x1, 0x1239a60, 0
xc420128c40, 0x2, 0x42caf6, 0xc42001f300, 0xc422831d98, 0xc4227951c0, ...)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/peer.go:123 +0x31e
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).addOutboundPeerWithConfig(0xc4200ad040, 0xc423fd1380, 0
xc420933e00, 0xc423f48801, 0x28, 0x2)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:455 +0x12b
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).DialPeerWithAddress(0xc4200ad040, 0xc423fd1380, 0x1, 0x
0, 0x0)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:371 +0xdc
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).reconnectToPeer(0xc4200ad040, 0x123e000, 0xc42007bb00)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:290 +0x25f
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: created by github.com/tendermint/tendermint/p2p.(*Switch).StopPeerForError
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:256 +0x1b7
```
https://play.golang.org/p/gN21yO9IRs3
```
func waitWithCancel(f func() *clist.CElement, ctx context.Context) *clist.CElement {
el := make(chan *clist.CElement, 1)
select {
case el <- f():
```
will just run f() blockingly, so this doesn't change much in terms of behavior.
Alexander Simmerl
Anton Kaliaev
Ethan Buchman
Dev Ojha
ValarDragon
Jeremiah Andrews
Zach Ramsay
Liamsi
idoor88
Vladislav Dmitriyev
Jae Kwon