Add Has function, create better handling of errors when adding evidence, usage of error types.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* mark unsolicited and too frequent messaged as bad
* add tests
* update changelog and fix error
* revised error types
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Closes: #4537
Uses SignedHeaderBefore to find header before unverified header and then bisection to verify the header. Only when header is between first and last trusted header height else if before the first trusted header height then regular backwards verification is used.
* proto: use docker to generate stubs
- provide an option to developers to use docker to generate proto stubs
closes#4579
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
Closes: #4546
The algorithm uses an array to store the headers and validators and populates it at every bisection (which is an unsuccessful verification). When a successful verification finally occurs it updates the new trusted header, trims that header from the cache (the array) and sets the depth pointer back to 0. Instead of retrieving new headers it will use the cached headers, incrementing in depth until it reaches the end of the cache which by then it will start to retrieve new headers from the provider.
Mathematically, this method doesn't properly bisect after the first round but it will always choose a pivot header that is within 1/8th of the upper header's height. I.e. if we are trying to jump 128 headers, the maximum offset from bisection height (64) is 64 + 16(128/8) = 80, therefore a better heuristic would be to obtain the new pivot header height as the middle of these two numbers which would therefore mean to multiply it by 9/16ths instead of 1/2 (sorry this might be a bit more complicated in writing but I can try better explain if someone is interested). Therefore I would also, upon consensus, propose that we change the pivot height to 9/16th's of the previous height
* rc1/v0.33.2
- release candiadte for 0.33.2
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Using the WebSocket server, when the same client calls multiple time the subscribe method, only the last subscription receives all the events of the previous ones.
example:
subscription1 = tm.event = 'NewBlock'
subscription2 = tm.event = 'Tx'
In this case, subscription2 will receive the new blocks but subscription1 will not.
This came from the WebSocket handler that had the declaration of the rpcrequest moved and so overridden for every request and given in the JSONReq client context (so the id of the subscription was not the right one).
This fixes the issue by simply declaring the rpcrequest inside the loop so every request will create a new object without overwriting the previous one.
* proto: add buf and protogen script
- add buf with minimal changes
- add protogen script to easier generate proto files
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add protoc needs
* add some needed shell cmds
* remove buf from tools as it is not needed everytime
* add proto lint and breakage to ci
* add section in changelog and upgrading files
* address pr comments
* remove space in circle config
* remove spaces in makefile comment
* add section on contributing on how to work with proto
* bump buf to 0.7
* test bufbuild image
* test install make in bufbuild image
* revert to tendermintdev image
* Update Makefile
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* dep: update tm-db to 0.4.0
- update 0.4.0 as it is a breaking change and cannot be handled by depndabot
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more work towards error handling
* error and emtpy bytes handling
* work on tests
* add changelog entry, change some error handling
* address some pr comments
* panic in a few more places
* move error higher up
* redo some error handling
* fix some bz == nil to len(bz) == 0
* change statebytes
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* prometheus/metrics: two new metrics for consensus
- add consensus_validator_power metric so if a node is a validator it can see its own power in prometheus
- add last_signed_height metric so if a node is a validator it can be aware of at which height the most recent time it signed.
- closes: #3773
- closes: #3083
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* check if signature is present
* minor change and check if sig is not absent
* add changelog entry
* Update consensus/state.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
* add label with validator address
* change address to vali_address
* add metric missed blocks
* add changelog entry for missed blocks metric
* address naming & add docs
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
## Issue
Implement a new subcommand: tendermint debug. This subcommand itself has two subcommands:
$ tendermint debug kill <pid> </path/to/out.zip> --home=</path/to/app.d>
Writes debug info into a compressed archive. The archive will contain the following:
├── config.toml
├── consensus_state.json
├── net_info.json
├── stacktrace.out
├── status.json
└── wal
The Tendermint process will be killed.
$ tendermint debug dump </path/to/out> --home=</path/to/app.d>
This command will perform similar to kill except it only polls the node and dumps debugging data every frequency seconds to a compressed archive under a given destination directory. Each archive will contain:
├── consensus_state.json
├── goroutine.out
├── heap.out
├── net_info.json
├── status.json
└── wal
Note:
goroutine.out and heap.out will only be written if a profile address is provided and is operational.
This command is blocking and will log any error.
replaces: #3327closes: #3249
## Commits:
* Implement debug tool command stubs
* Implement net getters and zip logic
* Update zip dir API and add home flag
* Add simple godocs for kill aux functions
* Move IO util to new file and implement copy WAL func
* Implement copy config function
* Implement killProc
* Remove debug fmt
* Validate output file input
* Direct STDERR to file
* Godoc updates
* Sleep prior to killing tail proc
* Minor cleanup of godocs
* Move debug command and add make target
* Rename command handler function
* Add example to command long descr
* Move current implementation to cmd/tendermint/commands/debug
* Update kill cmd long description
* Implement dump command
* Add pending log entry
* Add gosec nolint
* Add error check for Mkdir
* Add os.IsNotExist(err)
* Add to debugging section in running-in-prod doc
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* libs/common: Refactor libs/common 4
- move byte function out of cmn to its own pkg
- move tempfile out of cmn to its own pkg
- move throttletimer to its own pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix linting issues
* libs/common: refactor libs common 3
- move nil.go into types folder and make private
- move service & baseservice out of common into service pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
* libs/common: Refactor libs/common 01
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* regenerate proto files, move intslice to where its used
* update kv.KVPair(s) to kv.Pair(s)
* add changelog entry
* make intInSlice private
Callum Waters
Erik Grinaker
Anton Kaliaev
Yongwoo Lee
Marko
Tess Rinearson
Greg Szabo
Erik Grinaker
Michael FIG
Alessio Treglia
Anthony
Peter Mrekaj
Prince Sinha
Alexander Bezobchuk
Cuong Manh Le