The race occurred as a result of a goroutine launched by `processPeerUpdate` racing with the `OnStop` method. The `processPeerUpdates` goroutine deletes from the map as `OnStop` is reading from it. This change updates the `OnStop` method to wait for the peer updates channel to be done before closing the peers. It also copies the map contents to a new map so that it will not conflict with the view of the map that the goroutine created in `processPeerUpdate` sees.
This change aims to keep versions of mockery consistent across developer laptops.
This change adds mockery to the `tools.go` file so that its version can be managed consistently in the `go.mod` file.
Additionally, this change temporarily disables adding mockery's version number to generated files. There is an outstanding issue against the mockery project related to the version string behavior when running from `go get`. I have created a pull request to fix this issue in the mockery project.
see: https://github.com/vektra/mockery/issues/397
closes#2498
solves part of #3365
Note: difficult to test the event emit in SwitchToFastSync part, might need to change `stateSyncReactor` to an interface in the `nodeImpl` struct
## Description
Internalize some libs. This reduces the amount ot public API tendermint is supporting. The moved libraries are mainly ones that are used within Tendermint-core.
blockchain/vX reactor priority was decreased because during the normal operation
(i.e. when the node is not fast syncing) blockchain priority can't be
the same as consensus reactor priority. Otherwise, it's theoretically possible to
slow down consensus by constantly requesting blocks from the node.
NOTE: ideally blockchain/vX reactor priority would be dynamic. e.g. when
the node is fast syncing, the priority is 10 (max), but when it's done
fast syncing - the priority gets decreased to 5 (only to serve blocks
for other nodes). But it's not possible now, therefore I decided to
focus on the normal operation (priority = 5).
evidence and consensus critical messages are more important than
the mempool ones, hence priorities are bumped by 1 (from 5 to 6).
statesync reactor priority was changed from 1 to 5 to be the same as
blockchain/vX priority.
Refs https://github.com/tendermint/tendermint/issues/5816
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
Adds a genesis parameter `initial_height` which specifies the initial block height, as well as ABCI `RequestInitChain.InitialHeight` to pass it to the ABCI application, and `State.InitialHeight` to keep track of the initial height throughout the code. Fixes#2543, based on [RFC-002](https://github.com/tendermint/spec/pull/119). Spec changes in https://github.com/tendermint/spec/pull/135.
## Description
This PR wraps the stdlib sync.(RW)Mutex & godeadlock.(RW)Mutex. This enables using go-deadlock via a build flag instead of using sed to replace sync with godeadlock in all files
Closes: #3242
LastCommitRound should always be >= 0 for heights > 1.
In State.updateToState, last precommit is computed only when round
greater than -1 and has votes. But "LastCommit" is always updated
regardless of the condition. If there's no last precommit, "LastCommit"
is set to (*types.VoteSet)(nil). That's why "LastCommit" can be -1 for
heights > 1.
To fix it, only update State.RoundState.LastCommit when there is last
precommit.
Fixes#2737
Co-authored-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Fixes#828. Adds state sync, as outlined in [ADR-053](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-053-state-sync-prototype.md). See related PRs in Cosmos SDK (https://github.com/cosmos/cosmos-sdk/pull/5803) and Gaia (https://github.com/cosmos/gaia/pull/327).
This is split out of the previous PR #4645, and branched off of the ABCI interface in #4704.
* Adds a new P2P reactor which exchanges snapshots with peers, and bootstraps an empty local node from remote snapshots when requested.
* Adds a new configuration section `[statesync]` that enables state sync and configures the light client. Also enables `statesync:info` logging by default.
* Integrates state sync into node startup. Does not support the v2 blockchain reactor, since it needs some reorganization to defer startup.
to prevent malicious nodes from sending us large messages (~21MB, which
is the default `RecvMessageCapacity`)
This allows us to remove unnecessary `maxMsgSize` check in `decodeMsg`. Since each channel has a msg capacity set to `maxMsgSize`, there's no need to check it again in `decodeMsg`.
Closes#1503
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
William Banfield
Sam Kleinman
Callum Waters
JayT106
Aleksandr Bezobchuk
Marko
Anton Kaliaev
Tess Rinearson
Erik Grinaker
Erik Grinaker
Greg Zaitsev