When shutting down blocksync, it is observed that the process can hang completely. A dump of running goroutines reveals that this is due to goroutines not listening on the correct shutdown signal. Namely, the `poolRoutine` goroutine does not wait on `pool.Quit`. The `poolRoutine` does not receive any other shutdown signal during `OnStop` becuase it must stop before the `r.closeCh` is closed. Currently the `poolRoutine` listens in the `closeCh` which will not close until the `poolRoutine` stops and calls `poolWG.Done()`.
This change also puts the `requestRoutine()` in the `OnStart` method to make it more visible since it does not rely on anything that is spawned in the `poolRoutine`.
```
goroutine 183 [semacquire]:
sync.runtime_Semacquire(0xc0000d3bd8)
runtime/sema.go:56 +0x45
sync.(*WaitGroup).Wait(0xc0000d3bd0)
sync/waitgroup.go:130 +0x65
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStop(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:193 +0x47
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc0000d3a00, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/node.(*nodeImpl).OnStop(0xc00052c000)
github.com/tendermint/tendermint/node/node.go:758 +0xc62
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc00052c000, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/cmd/tendermint/commands.NewRunNodeCmd.func1.1()
github.com/tendermint/tendermint/cmd/tendermint/commands/run_node.go:143 +0x62
github.com/tendermint/tendermint/libs/os.TrapSignal.func1(0xc000df6d20, 0x7f04a68da900, 0xc0004a8930, 0xc0005a72d8)
github.com/tendermint/tendermint/libs/os/os.go:26 +0x102
created by github.com/tendermint/tendermint/libs/os.TrapSignal
github.com/tendermint/tendermint/libs/os/os.go:22 +0xe6
goroutine 161 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).poolRoutine(0xc0000d3a00, 0x0)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:464 +0x2b3
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:174 +0xf1
goroutine 162 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).processBlockSyncCh(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:310 +0x151
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:177 +0x54
goroutine 163 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).processPeerUpdates(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:363 +0x12b
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:178 +0x76
```
This test reliably gets hung up on network configuration, (which may
be a real issue,) but it's network setup is handcranked and we should
ensure that the test focuses on it's core assertions and doesn't fail for
test architecture reasons.
Fix the order of lines in docs/versions so that v0.34 is last (the current release).
Related changes:
- Update docs/DOCS_README.md to reflect the current state of how we publish the site.
- Fix the build-docs target in Makefile to not perturb the package-lock.json during the build.
- Fix the Makefile rule to not clobber package-lock.json.
I observed a couple of problems with the generator in some recent tests:
- there were a couple of hybrid test cases which did not have any
legacy nodes (randomness and all.) I change the probability to
produce more reliable results.
- added options to the generation to be able to add a max (to
compliment the earlier min) number of nodes for local testing.
- added an option to support reversing the sort order so "more
complex" networks were first, as well as tweaked some of the point
values.
- this refactored the generators cli parsing to be a bit more clear.
The main effect of this change is to flush the socket client and server message
encoding buffers immediately once the message is fully and correctly encoded.
This allows us to remove the timer and some other special cases, without
changing the observed behaviour of the system.
-- Background
The socket protocol client and server each use a buffered writer to encode
request and response messages onto the underlying connection. This reduces the
possibility of a single message being split across multiple writes, but has the
side-effect that a request may remain buffered for some time.
The implementation worked around this by keeping a ticker that occasionally
triggers a flush, and by flushing the writer in response to an explicit request
baked into the client/server protocol (see also #6994).
These workarounds are both unnecessary: Once a message has been dequeued for
sending and fully encoded in wire format, there is no real use keeping all or
part of it buffered locally. Moreover, using an asynchronous process to flush
the buffer makes the round-trip performance of the request unpredictable.
-- Benchmarks
Code: https://play.golang.org/p/0ChUOxJOiHt
I found no pre-existing performance benchmarks to justify the flush pattern,
but a natural question is whether this will significantly harm client/server
performance. To test this, I implemented a simple benchmark that transfers
randomly-sized byte buffers from a no-op "client" to a no-op "server" over a
Unix-domain socket, using a buffered writer, both with and without explicit
flushes after each write.
As the following data show, flushing every time (FLUSH=true) does reduce raw
throughput, but not by a significant amount except for very small request
sizes, where the transfer time is already trivial (1.9μs). Given that the
client is calibrated for 1MiB transactions, the overhead is not meaningful.
The percentage in each section is the speedup for flushing only when the buffer
is full, relative to flushing every block. The benchmark uses the default
buffer size (4096 bytes), which is the same value used by the socket client and
server implementation:
FLUSH NBLOCKS MAX AVG TOTAL ELAPSED TIME/BLOCK
false 3957471 512 255 1011165416 2.00018873s 505ns
true 1068568 512 255 273064368 2.000217051s 1.871µs
(73%)
false 536096 4096 2048 1098066401 2.000229108s 3.731µs
true 477911 4096 2047 978746731 2.000177825s 4.185µs
(10.8%)
false 124595 16384 8181 1019340160 2.000235086s 16.053µs
true 120995 16384 8179 989703064 2.000329349s 16.532µs
(2.9%)
false 2114 1048576 525693 1111316541 2.000479928s 946.3µs
true 2083 1048576 526379 1096449173 2.001817137s 961.025µs
(1.5%)
Note also that the FLUSH=false baseline is actually faster than the production
code, which flushes more often than is required by the buffer filling up.
Moreover, the timer slows down the overall transaction rate of the client and
server, indepenedent of how fast the socket transfer is, so the loss on a real
workload is probably much less.
I've been noticing that there are a number of situations where the
statesync reactor blocks waiting for peers (or similar,) I've moved
things around to improve outcomes in local tests.
In the last run, there were two problems at the RPC layer returned
from light nodes' RPC end points. I think exercising the light client
proxy RPC system is something that can/should be done via unit
testing, and that likely these errors are (in production) transient
and (in CI) very likely to fail for test environment issues.
The code in the Tendermint repository makes heavy use of import aliasing.
This is made necessary by our extensive reuse of common base package names, and
by repetition of similar names across different subdirectories.
Unfortunately we have not been very consistent about which packages we alias in
various circumstances, and the aliases we use vary. In the spirit of the advice
in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports,
his change makes an effort to clean up and normalize import aliasing.
This change makes no API or behavioral changes. It is a pure cleanup intended
o help make the code more readable to developers (including myself) trying to
understand what is being imported where.
Only unexported names have been modified, and the changes were generated and
applied mechanically with gofmt -r and comby, respecting the lexical and
syntactic rules of Go. Even so, I did not fix every inconsistency. Where the
changes would be too disruptive, I left it alone.
The principles I followed in this cleanup are:
- Remove aliases that restate the package name.
- Remove aliases where the base package name is unambiguous.
- Move overly-terse abbreviations from the import to the usage site.
- Fix lexical issues (remove underscores, remove capitalization).
- Fix import groupings to more closely match the style guide.
- Group blank (side-effecting) imports and ensure they are commented.
- Add aliases to multiple imports with the same base package name.
We moved some files further down in the directory structure in #6964, which
caused the relative paths to the mockery wrapper to stop working.
There does not seem to be an obvious way to get the module root as a default
environment variable, so for now I just added the extra up-slashes.
This package is not used in the tendermint repository since 31e7cdee.
Note that this is not the same package as rpc/client/mock (N.B. singular) which
is still used in some tests.
A search of GitHub turns up only 11 uses, all of which are in clones of the
tendermint repo at old commits..
* rpc: Strip down the base RPC client interface.
Prior to this change, the RPC client interface requires implementing the entire
Service interface, but most of the methods of Service are not needed by the
concrete clients. Dissociate the Client interface from the Service interface.
- Extract only those methods of Service that are necessary to make the existing
clients work.
- Update the clients to combine Start/Onstart and Stop/OnStop. This does not
change what the clients do to start or stop. Only the websocket clients make
use of this functionality anyway.
The websocket implementation uses some plumbing from the BaseService helper.
We should be able to excising that entirely, but the current interface
dependencies among the clients would require a much larger change, and one
that leaks into other (non-RPC) packages.
As a less-invasive intermediate step, preserve the existing client behaviour
(and tests) by extracting the necessary subset of the BaseService
functionality to an analogous RunState helper for clients. I plan to obsolete
that type in a future PR, but for now this makes a useful waypoint.
Related:
- Clean up client implementations.
- Update mocks.
## Description
- Add deprecated to config values in toml
- update config in configuration doc
- explain how to set up a node with the new network
- add sentence about not needing to fork tendermint for built-in tutorial
- closes#6865
- add note to use a released version of tendermint with the tutorials. This is to avoid unknown issues prior to a release.
William Banfield
Tess Rinearson
Sam Kleinman
M. J. Fromberger
lklimek
dependabot[bot]
Callum Waters
Marko
Daria K
JayT106