Attempt to fix this the below test failure by waiting for the listener to get ready. I am not at all convinced that this is the correct fix - the below indicates that the TCP socket was closed after it was set up - but I'm unable to come up with an actionable hypothesis for what caused it.
```
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:44737: use of closed network connection
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:42589: use of closed network connection
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:40905: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:39847: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:39989: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:43587: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:35415: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:38657: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:38217: use of closed network connection
2020/05/14 17:25:13 Failed to accept conn: accept tcp 127.0.0.1:42247: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39705: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39491: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:37107: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39909: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:37987: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:41505: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39121: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:46569: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:45643: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:35289: use of closed network connection
--- FAIL: TestTransportMultiplexAcceptMultiple (0.43s)
transport_test.go:200: auth failure: handshake failed: EOF
FAIL
```
* p2p: log error in transport tests
* p2p: exit from fast peer only when handshake is done
TestTransportMultiplexAcceptNonBlocking
fixes panic: write to a closed channel
* p2p: increase timeout in TestTransportMultiplexConnFilterTimeout
Fixes https://github.com/tendermint/tendermint/issues/4854#issuecomment-630739200
* p2p: yield control to another goroutine manually
* increase timeout in TestTransportMultiplexAcceptNonBlocking
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Fixes#828. Adds state sync, as outlined in [ADR-053](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-053-state-sync-prototype.md). See related PRs in Cosmos SDK (https://github.com/cosmos/cosmos-sdk/pull/5803) and Gaia (https://github.com/cosmos/gaia/pull/327).
This is split out of the previous PR #4645, and branched off of the ABCI interface in #4704.
* Adds a new P2P reactor which exchanges snapshots with peers, and bootstraps an empty local node from remote snapshots when requested.
* Adds a new configuration section `[statesync]` that enables state sync and configures the light client. Also enables `statesync:info` logging by default.
* Integrates state sync into node startup. Does not support the v2 blockchain reactor, since it needs some reorganization to defer startup.
to prevent malicious nodes from sending us large messages (~21MB, which
is the default `RecvMessageCapacity`)
This allows us to remove unnecessary `maxMsgSize` check in `decodeMsg`. Since each channel has a msg capacity set to `maxMsgSize`, there's no need to check it again in `decodeMsg`.
Closes#1503
in TestPEXReactorDialsPeerUpToMaxAttemptsInSeedMode
Closes#4668
______
For contributor use:
- [x] Wrote tests
- [ ] ~~Updated CHANGELOG_PENDING.md~~
- [x] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.
- [ ] ~~Updated relevant documentation (`docs/`) and code comments~~
- [x] Re-reviewed `Files changed` in the Github PR explorer
* mark unsolicited and too frequent messaged as bad
* add tests
* update changelog and fix error
* revised error types
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* dep: update tm-db to 0.4.0
- update 0.4.0 as it is a breaking change and cannot be handled by depndabot
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more work towards error handling
* error and emtpy bytes handling
* work on tests
* add changelog entry, change some error handling
* address some pr comments
* panic in a few more places
* move error higher up
* redo some error handling
* fix some bz == nil to len(bz) == 0
* change statebytes
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* libs/common: Refactor libs/common 4
- move byte function out of cmn to its own pkg
- move tempfile out of cmn to its own pkg
- move throttletimer to its own pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix linting issues
* libs/common: refactor libs common 3
- move nil.go into types folder and make private
- move service & baseservice out of common into service pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
Erik Grinaker
Anton Kaliaev
Marko
Callum Waters
Tess Rinearson
mergify[bot]
Erik Grinaker