time_iota_ms is intended to ensure that an honest validator always generates timestamps
with time increasing monotonically. For this purpose, it always suffices to have this parameter
set to `1ms`. Allowing users to choose different numbers increases bug surface area.
Thus the code now ignores the user provided time_iota_ms parameter (marking it as unused),
and uses 1ms internally.
This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog.
The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack.
The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely.
There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
Replace testing.T.Cleanup() with deferred function
calls in test helpers as those cleanup functions
need to be called once the helper returns and not
when the entire test ends.
This reverts a few of the changes introduced in #5723.
Thanks: @erikgrinaker for pointing this out.
Ref: #5732
`abci.Client`:
- Sync and Async methods now accept a context for cancellation
* grpc client uses context to cancel both Sync and Async requests
* local client ignores context parameter
* socket client uses context to cancel Sync requests and to drop Async requests before sending them if context was cancelled prior to that
- Async methods return an error
* socket client returns an error immediately if queue is full for Async requests
* local client always returns nil error
* grpc client returns an error if context was cancelled before we got response or the receiving queue had a space for response (do not confuse with the sending queue from the socket client)
- specify clients semantics in [doc.go](https://raw.githubusercontent.com/tendermint/tendermint/27112fffa62276bc016d56741f686f0f77931748/abci/client/doc.go)
`mempool.TxInfo`
- add optional `Context` to `TxInfo`, which can be used to cancel `CheckTx` request
Closes#5190
Replace defer with t.Cleanup().
Replace the combination of ioutil.TempDir, error checking
and defer os.RemoveAll() with Go testing.T's new TempDir()
helper.
Mark auxiliary functions as test helpers.
This fixes spurious `TestByzantinePrevoteEquivocation` failures by extending the block range and time spent waiting for evidence. I've seen many runs where the evidence isn't committed until e.g. height 27. Haven't looked into _why_ this happens, but as long as the evidence is committed eventually and the test doesn't spuriously fail I'm (mostly) happy. WDYT @cmwaters?
## Description
Part of the issue is to add metrics to the websocket connection. It seems this would require some moving around of things in the node pkg. I opted to not make this change now, and wait for when we do a node pkg refactor.
If someone disagrees with this appraoch please let me know, I can attempt to get metrics into the rpc layer.
There is not a need to update documentation as it already states this metric is a histogram..
Closes: #1791
## Description
Add missing metrics.
`Blockchain/v2` exposes metrics for events. I don't find these as something a node operator should utilize as it does not bring insight.
Closes: #XXX
## Description
This PR aims to make the crypto.PubKey interface more intuitive.
Changes:
- `VerfiyBytes` -> `VerifySignature`
Before `Bytes()` was amino encoded, now since it is the byte representation should we get rid of it entirely?
EDIT: decided to keep `Bytes()` as it is useful if you are using the interface instead of the concrete key
Closes: #XXX
Followup from #5227. Instead of checking `ResponseInitChain.app_hash` against the genesis doc app hash, we instead replace it. We should probably remove the genesis doc app hash completely, and rely solely on the one from `InitChain`, I'll open a separate issue to discuss this.
Adds a genesis parameter `initial_height` which specifies the initial block height, as well as ABCI `RequestInitChain.InitialHeight` to pass it to the ABCI application, and `State.InitialHeight` to keep track of the initial height throughout the code. Fixes#2543, based on [RFC-002](https://github.com/tendermint/spec/pull/119). Spec changes in https://github.com/tendermint/spec/pull/135.
## Description
Add test vectors for all reactors
- [x] state-sync
- [x] privval
- [x] mempool
- [x] p2p
- [x] evidence
- [ ] light?
this PR is primarily oriented at testvectors for things going over the wire. should we expand the testvectors into types as well?
Closes: #XXX
Fixes#5192.
@liamsi Can you verify that the test vectors match the Rust implementation? I updated `ProofsFromByteSlices()` as well, anything else that should be updated?
Solves #5138 in the way that if a validatorSet is nil or empty it will not try to transform it to protobug
Co-authored-by: Callum Michael Waters <cmwaters19@gmail.com>
## Description
This PR wraps the stdlib sync.(RW)Mutex & godeadlock.(RW)Mutex. This enables using go-deadlock via a build flag instead of using sed to replace sync with godeadlock in all files
Closes: #3242
Closes#5074
Old code does not work when --consensus.create_empty_blocks=false
(because it only calls tmos.Kill when ApplyBlock fails). New code is
listening ABCI clients for Quit and kills TM process if there were any
errors.
Closes#4926
The dump consensus state had this:
"last_commit": {
"votes": [
"Vote{0:04CBBF43CA3E 385085/00/2(Precommit) 1B73DA9FC4C8 42C97B86D89D @ 2020-05-27T06:46:51.042392895Z}",
"Vote{1:055799E028FA 385085/00/2(Precommit) 652B08AD61EA 0D507D7FA3AB @ 2020-06-28T04:57:29.20793209Z}",
"Vote{2:056024CFA910 385085/00/2(Precommit) 652B08AD61EA C8E95532A4C3 @ 2020-06-28T04:57:29.452696998Z}",
"Vote{3:0741C95814DA 385085/00/2(Precommit) 652B08AD61EA 36D567615F7C @ 2020-06-28T04:57:29.279788593Z}",
Note there's a precommit in there from the first val from May (2020-05-27) while the rest are from today (2020-06-28). It suggests there's a validator from an old instance of the network at this height (they're using the same chain-id!). Obviously a single bad validator shouldn't be an issue. But the Commit refactor work introduced a bug.
When we propose a block, we get the block.LastCommit by calling MakeCommit on the set of precommits we saw for the last height. This set may include precommits for a different block, and hence the block.LastCommit we propose may include precommits that aren't actually for the last block (but of course +2/3 will be). Before v0.33, we just skipped over these precommits during verification. But in v0.33, we expect all signatures for a blockID to be for the same block ID! Thus we end up proposing a block that we can't verify.
## Description
partially cleanup in preparation for errcheck
i ignored a bunch of defer errors in tests but with the update to go 1.14 we can use `t.Cleanup(func() { if err := <>; err != nil {..}}` to cover those errors, I will do this in pr number two of enabling errcheck.
ref #5059
Dev Ojha
Anton Kaliaev
Erik Grinaker
Tess Rinearson
Alessio Treglia
Marko
Callum Waters
QuantumExplorer
dongsam
