Closes: #4530
This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.
* rpc/client: do not pass height param if height ptr is nil
* rpc/core: validate incoming evidence!
* only accept ConflictingHeadersEvidence if one
of the headers is committed from this full node's perspective
This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.
* swap CommitSig with Vote in LunaticValidatorEvidence
Vote is needed to validate signature
* no need to embed client
http is a provider and should not be used as a client
Closes: #4695
Verify /block_results and /validators responses from an HTTP client using the light client.
Added count and total to /validators response.
Refs #3113
Add Has function, create better handling of errors when adding evidence, usage of error types.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* docs: update links to rpc
- links to rpc have not been updated. thank you @okwme
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* Update docs/app-dev/indexing-transactions.md
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* libs/common: Refactor libs/common 4
- move byte function out of cmn to its own pkg
- move tempfile out of cmn to its own pkg
- move throttletimer to its own pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix linting issues
implementation spec of Improved Trusted Peering ADR-050 by B-Harvest
- add unconditional_peer_ids and persistent_peers_max_dial_period to config
- add unconditionalPeerIDs map to Switch struct
default config value of persistent_peers_max_dial_period is 0s(disabled)
Refs #4072, #4053
https://www.jsonrpc.org/specification
What is done in this PR:
JSONRPCClient: validate that Response.ID matches Request.ID I wanted
to do the same for the WSClient, but since we're sending events as
responses, not notifications, checking IDs would require storing
them in memory indefinitely (and we won't be able to remove them
upon client unsubscribing because ID is different then).
Request.ID is now optional. Notification is a Request without an ID.
Previously "" or 0 were considered as notifications
Remove #event suffix from ID from an event response (partially fixes
#2949) ID must be either string, int or null AND must be equal to
request's ID. Now, because we've implemented events as responses, WS
clients are tripping when they see Response.ID("0#event") !=
Request.ID("0"). Implementing events as requests would require a lot
of time (~ 2 days to completely rewrite WS client and server)
generate unique ID for each request
switch to integer IDs instead of "json-client-XYZ"
id=0 method=/subscribe
id=0 result=...
id=1 method=/abci_query
id=1 result=...
> send events (resulting from /subscribe) as requests+notifications (not
responses)
this will require a lot of work. probably not worth it
* rpc: generate an unique ID for each request
in conformance with JSON-RPC spec
* WSClient: check for unsolicited responses
* fix golangci warnings
* save commit
* fix errors
* remove ID from responses from subscribe
Refs #2949
* clients are safe for concurrent access
* tm-bench: switch to int ID
* fixes after my own review
* comment out sentIDs in WSClient
see commit body for the reason
* remove body.Close
it will be closed automatically
* stop ws connection outside of write/read routines
also, use t.Rate in tm-bench indexer when calculating ID
fix gocritic issues
* update swagger.yaml
* Apply suggestions from code review
* fix stylecheck and golint linter warnings
* update changelog
* update changelog2
* Add pagination to /validators
- closes#3472
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add swagger params, default returns all
* address pr comments
* golint fix
* swagger default change, change to default in comment
* swagger.yaml: replace x-example with example
https://swagger.io/docs/specification/adding-examples/
* Revert "swagger.yaml: replace x-example with example"
This reverts commit 9df1b006de.
* update changelog and remove extra body close
## Issue:
Removed BlockMeta in ResultBlock in favor of BlockId for /block
Added block_size to BlockMeta this is reflected in /blockchain
fixes#3188
added breaking as some clients may be using header from blockmeta instead of block in /block
## Commits:
* cleanup block path
Remove duplication of data in `/block`
fixes#3188
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* Remove duplication of data in `/block`
- Created a secondary type to be used for /block
fixes#3188
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* remove commented out code
* fix ci
* add changelog_pending entry
* remove extra variable
* update swagger
* change int to uint for blocksize
* fix swagger
* remove extensive comments
* update changelog
* fix conflicts after merge
* use int for BlockSize and NumTxs in BlockMeta
- with 99.9% guarantee, the size of either will never reach int32
- most of the Go "Size" stdlib functions return int
BREAKING
Example response:
```json
{
"jsonrpc": "2.0",
"id": "",
"result": {
"height": "2109",
"txs_results": null,
"begin_block_events": null,
"end_block_events": null,
"validator_updates": null,
"consensus_param_updates": null
}
}
```
Old result consisted of ABCIResponses struct and height. Exposing
internal ABCI structures (which we store in state package) in RPC seems
bad to me for the following reasons:
1) high risk of breaking the API when somebody changes internal structs
(HAPPENED HERE!)
2) RPC is aware of ABCI, which I'm not sure we want
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* New lint version upgrade
- linter was upgraded
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* enable-a;; is deprecated
* minor change
* another try
* some more changes
* some more changes
* reenable prealloc
* add version till bot is fixed
- goimports is not used as a tool anymore
- correct me if wrong
- rename devtools folder to merely tools.mk
- remove slate_header.txt
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* Remove unnecessary type conversions
* Consolidate repeated strings into consts
* Clothe return statements
* Update blockchain/v1/reactor_fsm_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=unconvert
golangci-lint run --no-config --disable-all=true --enable=goconst
golangci-lint run --no-config --disable-all=true --enable=nakedret
Contributes to #3262
* Renamed wire.go to codec.go
- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* ide error
* rename amino.go to codec.go
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
## PR
This PR introduces a fundamental breaking change to the structure of ABCI response and tx tags and the way they're processed. Namely, the SDK can support more complex and aggregated events for distribution and slashing. In addition, block responses can include duplicate keys in events.
Implement new Event type. An event has a type and a list of KV pairs (ie. list-of-lists). Typical events may look like:
"rewards": [{"amount": "5000uatom", "validator": "...", "recipient": "..."}]
"sender": [{"address": "...", "balance": "100uatom"}]
The events are indexed by {even.type}.{even.attribute[i].key}/.... In this case a client would subscribe or query for rewards.recipient='...'
ABCI response types and related types now include Events []Event instead of Tags []cmn.KVPair.
PubSub logic now publishes/matches against map[string][]string instead of map[string]string to support duplicate keys in response events (from #1385). A match is successful if the value is found in the slice of strings.
closes: #1859closes: #2905
## Commits:
* Implement Event ABCI type and updates responses to use events
* Update messages_test.go
* Update kvstore.go
* Update event_bus.go
* Update subscription.go
* Update pubsub.go
* Update kvstore.go
* Update query logic to handle slice of strings in events
* Update Empty#Matches and unit tests
* Update pubsub logic
* Update EventBus#Publish
* Update kv tx indexer
* Update godocs
* Update ResultEvent to use slice of strings; update RPC
* Update more tests
* Update abci.md
* Check for key in validateAndStringifyEvents
* Fix KV indexer to skip empty keys
* Fix linting errors
* Update CHANGELOG_PENDING.md
* Update docs/spec/abci/abci.md
Co-Authored-By: Federico Kunze <31522760+fedekunze@users.noreply.github.com>
* Update abci/types/types.proto
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update docs/spec/abci/abci.md
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update libs/pubsub/query/query.go
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update match function to match if ANY value matches
* Implement TestSubscribeDuplicateKeys
* Update TestMatches to include multi-key test cases
* Update events.go
* Update Query interface godoc
* Update match godoc
* Add godoc for matchValue
* DRY-up tx indexing
* Return error from PublishWithEvents in EventBus#Publish
* Update PublishEventNewBlockHeader to return an error
* Fix build
* Update events doc in ABCI
* Update ABCI events godoc
* Implement TestEventBusPublishEventTxDuplicateKeys
* Update TestSubscribeDuplicateKeys to be table-driven
* Remove mod file
* Remove markdown from events godoc
* Implement TestTxSearchDeprecatedIndexing test
## Description
also
handle errors from DialPeersAsync
remove nil addr from log msg
fix TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
This is a follow-up from
#3593 (review)
Fixes most of the #3617, except #3593 (comment)
## Commits
* rpc: /dial_peers: only mark peers as persistent if flag is on
also
- handle errors from DialPeersAsync
- remove nil addr from log msg
- fix TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
This is a follow-up from
https://github.com/tendermint/tendermint/pull/3593#pullrequestreview-233556909
* remove a call to AddPersistentPeers
TestDialFail will trigger a reconnect
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
## Description
Previously only outbound peers can be persistent.
Now, even if the peer is inbound, if it's marked as persistent, when/if conn is lost,
Tendermint will try to reconnect. This part is actually optional and can be reverted.
Plus, seed won't disconnect from inbound peer if it's marked as
persistent. Fixes#3362
## Commits
* make persistent prop independent of conn direction
Previously only outbound peers can be persistent. Now, even if the peer
is inbound, if it's marked as persistent, when/if conn is lost,
Tendermint will try to reconnect.
Plus, seed won't disconnect from inbound peer if it's marked as
persistent. Fixes#3362
* fix TestPEXReactorDialPeer test
* add a changelog entry
* update changelog
* add two tests
* reformat code
* test UnsafeDialPeers and UnsafeDialSeeds
* add TestSwitchDialPeersAsync
* spec: update p2p/config spec
* fixes after Ismail's review
* Apply suggestions from code review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* fix merge conflict
* remove sleep from TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
We don't need it actually.
* OriginalAddr -> SocketAddr
OriginalAddr records the originally dialed address for outbound peers,
rather than the peer's self reported address. For inbound peers, it was
nil. Here, we rename it to SocketAddr and for inbound peers, set it to
the RemoteAddr of the connection.
* use SocketAddr
Numerous places in the code call peer.NodeInfo().NetAddress().
However, this call to NetAddress() may perform a DNS lookup if the
reported NodeInfo.ListenAddr includes a name. Failure of this lookup
returns a nil address, which can lead to panics in the code.
Instead, call peer.SocketAddr() to return the static address of the
connection.
* remove nodeInfo.NetAddress()
Expose `transport.NetAddress()`, a static result determined
when the transport is created. Removing NetAddress() from the nodeInfo
prevents accidental DNS lookups.
* fixes from review
* linter
* fixes from review
* Make sure config.TimeoutBroadcastTxCommit < rpcserver.WriteTimeout()
* remove redundant comment
* libs/rpc/http_server: move Read/WriteTimeout into Config
* increase defaults for read/write timeouts
Based on this article
https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration
* WriteTimeout should be larger than TimeoutBroadcastTxCommit
* set a deadline for subscribing to txs
* extract duration into const
* add two changelog entries
* Update CHANGELOG_PENDING.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* 12 -> 10
* changelog
* changelog
* limit number of /subscribe clients and queries per client
Add the following config variables (under [rpc] section):
* max_subscription_clients
* max_subscriptions_per_client
* timeout_broadcast_tx_commit
Fixes#2826
new HTTPClient interface for subscriptions
finalize HTTPClient events interface
remove EventSubscriber
fix data race
```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0
Previous write at 0x00c000a36060 by goroutine 132:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 129 (running) created at:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 132 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
==================
```
lite client works (tested manually)
godoc comments
httpclient: do not close the out channel
use TimeoutBroadcastTxCommit
no timeout for unsubscribe
but 1s Local (5s HTTP) timeout for resubscribe
format code
change Subscribe#out cap to 1
and replace config vars with RPCConfig
TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout
rpc: Context as first parameter to all functions
reformat code
fixes after my own review
fixes after Ethan's review
add test stubs
fix config.toml
* fixes after manual testing
- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed
* fixes after Ismail's review
* Update rpc/grpc/grpc_test.go
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
Refs #3262
This fixes two small bugs:
1) lite/dbprovider: return `ok` instead of true in parse* functions. It's weird that we're ignoring `ok` value before.
2) consensus/state: previously because of the shadowing we almost never output "Error with msg". Now we declare both `added` and `err` in the beginning of the function, so there's no shadowing.
Anton Kaliaev
Callum Waters
Erik Grinaker
Yongwoo Lee
Marko
Michael FIG
Gregory Terzian
Erik Grinaker
Prince Sinha
dongsamb
Phil Salant
Alexander Bezobchuk
Ethan Buchman
Ismail Khoffi