* Switch ports 466xx to be 266xx
This is done so the default ports aren't in the linux kernel's default ephemeral port range.
* Update ABCI import
* Bump cache on circleci
* Get more verbose output for debugging
* Bump abci dependency
* Fix accidental change of a block header's hash
* pin abci release
* `unsafe_reset_all` also resets addrbook.json
When executing `unsafe_reset_all` it also clear all IP addresses from
addrbook.json. This is the expected behaviour of `unsafe_reset_all`.
* Fix tests
* improve logging statements
* use correct file
This is a maintenance change to move the private validator package out
of the types and to a top-level location. There is no good reason to
keep it under the types and it will more clearly coommunicate where
additions related to the privval belong. It leaves the interface and the
mock in types for now as it would introduce circular dependency between
privval and types, this should be resolved eventually.
* mv priv_validator to privval pkg
* use consistent `privval` as import
Follow-up to #1255
* improve testnet cmd
* allow non-validators
* configurable prefix
* populating of persistent peers
* relax permissions
* cleanup output dir every time
* do not remove dir
* remove panic comments
* use increment and decrement operators.
* remove unnecessary else branches.
* fix package comment with leading space.
* fix receiver names.
* fix error strings.
* remove omittable code.
* remove redundant return statement.
* Revert changes (code is generated.)
* use cfg as receiver name for all config-related types.
* use lsi as the receiver name for the LastSignedInfo type.
Follow-up to feedback from #1286, this change simplifies the connection
handling in the SocketClient and makes the communication via TCP more
robust. It introduces the tcpTimeoutListener to encapsulate accept and
i/o timeout handling as well as connection keep-alive, this type could
likely be upgraded to handle more fine-grained tuning of the tcp stack
(linger, nodelay, etc.) according to the properties we desire. The same
methods should be applied to the RemoteSigner which will be overhauled
when the priv_val_server is fleshed out.
* require private key
* simplify connect logic
* break out conn upgrades to tcpTimeoutListener
* extend test coverage and simplify component setup
Noticed while investigating
https://github.com/tendermint/tendermint/issues/970
As reported by @zramsay, we'd get the warning
from tendermint/rpc/lib because we were passing in
scheme-less addresses, so by default use "tcp".
Also by default, "node" (nodeAddr) has been set to:
"tcp://localhost:46657"
instead of the bare:
"localhost:46657"
This change is just to clean up such warnings as
they spuriously would spook users for a package "lite"
that claims to be secure.
Follow-up to #1255 aligning with the expectation that the external
signing process connects to the node. The SocketClient will block on
start until one connection has been established, support for multiple
signers connected simultaneously is a planned future extension.
* SocketClient accepts connection
* PrivValSocketServer renamed to RemoteSigner
* extend tests
* expose AuthEnc in the P2P config
if AuthEnc is true, dialed peers must have a node ID in the address and
it must match the persistent pubkey from the secret handshake.
Refs #1157
* fixes after my own review
* fix docs
* fix build failure
```
p2p/pex/pex_reactor_test.go:288:88: cannot use seed.NodeInfo().NetAddress() (type *p2p.NetAddress) as type string in array or slice literal
```
* p2p: introduce peerConn to simplify peer creation
* Introduce `peerConn` containing the known fields of `peer`
* `peer` only created in `sw.addPeer` once handshake is complete and NodeInfo is checked
* Eliminates some mutable variables and makes the code flow better
* Simplifies the `newXxxPeer` funcs
* Use ID instead of PubKey where possible.
* SetPubKeyFilter -> SetIDFilter
* nodeInfo.Validate takes ID
* remove peer.PubKey()
* persistent node ids
* fixes from review
* test: use ip_plus_id.sh more
* fix invalid memory panic during fast_sync test
```
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: panic: runtime error: invalid memory address or nil pointer dereference
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: [signal SIGSEGV: segmentation violation code=0x1 addr=0x20 pc=0x98dd3e]
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]:
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: goroutine 3432 [running]:
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.newOutboundPeerConn(0xc423fd1380, 0xc420933e00, 0x1, 0x1239a60, 0
xc420128c40, 0x2, 0x42caf6, 0xc42001f300, 0xc422831d98, 0xc4227951c0, ...)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/peer.go:123 +0x31e
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).addOutboundPeerWithConfig(0xc4200ad040, 0xc423fd1380, 0
xc420933e00, 0xc423f48801, 0x28, 0x2)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:455 +0x12b
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).DialPeerWithAddress(0xc4200ad040, 0xc423fd1380, 0x1, 0x
0, 0x0)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:371 +0xdc
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: github.com/tendermint/tendermint/p2p.(*Switch).reconnectToPeer(0xc4200ad040, 0x123e000, 0xc42007bb00)
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:290 +0x25f
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: created by github.com/tendermint/tendermint/p2p.(*Switch).StopPeerForError
2018-02-21T06:30:05Z box887.localdomain docker/local_testnet_4[14907]: #011/go/src/github.com/tendermint/tendermint/p2p/switch.go:256 +0x1b7
```
Following ADDR 008 the node will connect to an external
process to handle signing requests. Operation of the external process is
left to the user.
* introduce alias for PrivValidator interface on socket client
* integrate socket client in node
* structure tests
* remove unnecessary flag
config: test the default file
docs: spiff up config
config: minor fixes & comments
config: simplify test
config; use a seperate config directory, #556
config: update docs & parameterize file paths
config: PR comments
config: use the default object
fix a rebase error
* cmd/tendermint: fix initialization file creation checks
Fixes#989.
The original initialization sequence started to inexplicably
fail
```shell
tendermint unsafe_reset_all
tendermint init
tendermint node --proxy_app=dummy
```
used to fail with
```shell
ERROR: Failed to create node: Couldn't read GenesisDoc file: open
/Users/emmanuelodeke/.tendermint/genesis.json: no such file or directory
```
because the initialization sequence always assumed that the
genesisDoc would only be set if the privValidator was generated.
However, `tendermint unsafe_reset_all` only created the
`priv_validator.json` file which would mean that then running
`tendermint init` would never create the `genesis.json` file
which if following the recommended sequence would then fail
since the `genesis.json` was absent.
* cmd/tendermint: Load PrivValidatorFS if existent, lest generate it
Feedback from @melekes
* change logging messages for init cmd
Refs #989
Dev Ojha
Adrian Brink
Alexander Simmerl
Zarko Milosevic
Anton Kaliaev
suyuhuang
Ethan Buchman
Jae Kwon
Thomas Corbière
Vladislav Dmitriyev
Tomoya Ishizaki
Emmanuel T Odeke
Emmanuel T Odeke
Admir Sabanovic
Zach
Petabyte Storage