Fixes#5899 by renaming a bunch of P2P Protobuf entities (while maintaining wire compatibility):
* `Message` to `PexMessage` (as it's only used for PEX messages).
* `PexAddrs` to `PexResponse`.
* `PexResponse.Addrs` to `PexResponse.Addresses`.
* `NetAddress` to `PexAddress` (as it's only used by PEX).
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
## Description
Add test vectors for all reactors
- [x] state-sync
- [x] privval
- [x] mempool
- [x] p2p
- [x] evidence
- [ ] light?
this PR is primarily oriented at testvectors for things going over the wire. should we expand the testvectors into types as well?
Closes: #XXX
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
to prevent malicious nodes from sending us large messages (~21MB, which
is the default `RecvMessageCapacity`)
This allows us to remove unnecessary `maxMsgSize` check in `decodeMsg`. Since each channel has a msg capacity set to `maxMsgSize`, there's no need to check it again in `decodeMsg`.
Closes#1503
* mark unsolicited and too frequent messaged as bad
* add tests
* update changelog and fix error
* revised error types
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* libs/common: refactor libs common 3
- move nil.go into types folder and make private
- move service & baseservice out of common into service pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
implementation spec of Improved Trusted Peering ADR-050 by B-Harvest
- add unconditional_peer_ids and persistent_peers_max_dial_period to config
- add unconditionalPeerIDs map to Switch struct
default config value of persistent_peers_max_dial_period is 0s(disabled)
Refs #4072, #4053
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* New lint version upgrade
- linter was upgraded
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* enable-a;; is deprecated
* minor change
* another try
* some more changes
* some more changes
* reenable prealloc
* add version till bot is fixed
* Do not write 'Couldn't connect to any seeds' if there are no seeds
* changelog
* remove privValUpgrade
* Fix typo in changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: Marko <marbar3778@yahoo.com>
I'm setting up all peers dynamically by calling dial_peers, so p2p.seeds in configs is empty, and I'm seeing error log a lot in logs.
* p2p: extract ID validation into a separate func
- NewNetAddress panics if ID is invalid
- NetAddress#Valid returns an error
- remove ErrAddrBookInvalidAddrNoID
Fixes#2722
* p2p: remove repetitive check in ReceiveAddrs
* fix netaddress test
Calling ensurePeers outside of ensurePeersRoutine can lead to nodes
disconnecting from us due to "sent next PEX request too soon" error.
Solution is to just dial addrs we got from src instead of calling
ensurePeers.
Refs #2093Fixes#3338
Fixes#3521
The function NewNetAddressStringWithOptionalID is from a time when peer
IDs were optional. They're not anymore. So this should be renamed to
NewNetAddressString and should ensure the ID is provided.
* update changelog
* use NewNetAddress in transport tests
* use NewNetAddress in TestTransportMultiplexAcceptMultiple
* fix peer state init to late
Peer does not have a state yet. We set it in AddPeer.
We need an new interface before mconnection is started
* pex message to soon
fix reconnection pex send too fast,
error is caused lastReceivedRequests is still
not deleted when a peer reconnected
* add test case for initpeer
* add prove case
* remove potentially infinite loop
* Update consensus/reactor.go
Co-Authored-By: guagualvcha <baifudong@lancai.cn>
* Update consensus/reactor_test.go
Co-Authored-By: guagualvcha <baifudong@lancai.cn>
* document Reactor interface better
* refactor TestReactorReceiveDoesNotPanicIfAddPeerHasntBeenCalledYet
* fix merge conflicts
* blockchain: remove peer's ID from the pool in InitPeer
Refs #3338
* pex: resetPeersRequestsInfo both upon InitPeer and RemovePeer
* ensure RemovePeer is always called before InitPeer
by removing the peer from the switch last (after we've stopped it and
removed from all reactors)
* add some comments for ConsensusReactor#InitPeer
* fix pex reactor
* format code
* fix spelling
* update changelog
* remove unused methods
* do not clear lastReceivedRequests upon error
only in RemovePeer
* call InitPeer before we start the peer!
* add a comment to InitPeer
* write a test
* use waitUntilSwitchHasAtLeastNPeers func
* bring back timeouts
* Test to ensure Receive panics if InitPeer has not been called
* p2p/pex: consult seeds in crawlPeersRoutine
This changeset alters the startup behavior for crawlPeersRoutine. Previously
the routine would crawl a random selection of peers on startup. For a
new seed node, there are no peers. As a result, new seed nodes are unable
to bootstrap themselves with a list of peers until another node with a list
of peers connects to the seed. If this node relies on the seed node for peers,
then the two will not discover more peers.
This changeset makes the startup behavior for crawlPeersRoutine connect to
any seed nodes. Upon connecting, a request for peers will be sent to the seed node
thus helping bootstrap our seed node.
* p2p/pex: Adjust error message for no peers
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
## Description
Previously only outbound peers can be persistent.
Now, even if the peer is inbound, if it's marked as persistent, when/if conn is lost,
Tendermint will try to reconnect. This part is actually optional and can be reverted.
Plus, seed won't disconnect from inbound peer if it's marked as
persistent. Fixes#3362
## Commits
* make persistent prop independent of conn direction
Previously only outbound peers can be persistent. Now, even if the peer
is inbound, if it's marked as persistent, when/if conn is lost,
Tendermint will try to reconnect.
Plus, seed won't disconnect from inbound peer if it's marked as
persistent. Fixes#3362
* fix TestPEXReactorDialPeer test
* add a changelog entry
* update changelog
* add two tests
* reformat code
* test UnsafeDialPeers and UnsafeDialSeeds
* add TestSwitchDialPeersAsync
* spec: update p2p/config spec
* fixes after Ismail's review
* Apply suggestions from code review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* fix merge conflict
* remove sleep from TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
We don't need it actually.
If we are low on addresses for peering, we need to discover more peers. The
previous behavior would query existing peers; however, if an existing peer
does not participate in peer exchange, then our node will not discover more peers.
This change consults both existing peers as well as seeds when there is a deficit
in address book addresses. This allows for discovering peers though existing channels
as well as via seeds if existing peers do not share addresses.
* use dialPeer function in a seed mode
Fixes#3532
by storing a number of attempts we've tried to connect in-memory and
removing the address from addrbook when number of attempts > 16
A prior change to address accidental DNS lookups introduced the
SocketAddr on peer, which was then used to add it to the addressbook.
Which in turn swallowed the self reported port of the peer, which is
important on a reconnect. This change revives the NetAddress on NodeInfo
which the Peer carries, but now returns an error to avoid nil
dereferencing another issue observed in the past. Additionally we could
potentially address #3532, yet the original problem statemenf of that
issue stands.
As a drive-by optimisation `MarkAsGood` now takes only a `p2p.ID` which
makes it interface a bit stricter and leaner.
ListOfKnownAddresses is removed
panic if addrbook size is less than zero
CrawlPeers does not attempt to connect to existing or peers we're currently dialing
various perf. fixes
improved tests (though not complete)
move IsDialingOrExistingAddress check into DialPeerWithAddress (Fixes#2716)
* addrbook: preallocate memory when saving addrbook to file
* addrbook: remove oldestFirst struct and check for ID
* oldestFirst replaced with sort.Slice
* ID is now mandatory, so no need to check
* addrbook: remove ListOfKnownAddresses
GetSelection is used instead in seed mode.
* addrbook: panic if size is less than 0
* rewrite addrbook#saveToFile to not use a counter
* test AttemptDisconnects func
* move IsDialingOrExistingAddress check into DialPeerWithAddress
* save and cleanup crawl peer data
* get rid of DefaultSeedDisconnectWaitPeriod
* make linter happy
* fix TestPEXReactorSeedMode
* fix comment
* add a changelog entry
* Apply suggestions from code review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* rename ErrDialingOrExistingAddress to ErrCurrentlyDialingOrExistingAddress
* lowercase errors
* do not persist seed data
pros:
- no extra files
- less IO
cons:
- if the node crashes, seed might crawl a peer too soon
* fixes after Ethan's review
* add a changelog entry
* we should only consult Switch about peers
checking addrbook size does not make sense since only PEX reactor uses
it for dialing peers!
https://github.com/tendermint/tendermint/pull/3011#discussion_r270948875
* OriginalAddr -> SocketAddr
OriginalAddr records the originally dialed address for outbound peers,
rather than the peer's self reported address. For inbound peers, it was
nil. Here, we rename it to SocketAddr and for inbound peers, set it to
the RemoteAddr of the connection.
* use SocketAddr
Numerous places in the code call peer.NodeInfo().NetAddress().
However, this call to NetAddress() may perform a DNS lookup if the
reported NodeInfo.ListenAddr includes a name. Failure of this lookup
returns a nil address, which can lead to panics in the code.
Instead, call peer.SocketAddr() to return the static address of the
connection.
* remove nodeInfo.NetAddress()
Expose `transport.NetAddress()`, a static result determined
when the transport is created. Removing NetAddress() from the nodeInfo
prevents accidental DNS lookups.
* fixes from review
* linter
* fixes from review
* p2p/conn: FlushStop. Use in pex. Closes#2092
In seed mode, we call StopPeer immediately after Send.
Since flushing msgs to the peer happens in the background,
the peer connection is often closed before the messages are
actually sent out. The new FlushStop method allows all msgs
to first be written and flushed out on the conn before it is closed.
* fix dummy peer
* typo
* fixes from review
* more comments
* ensure pex doesn't call FlushStop more than once
FlushStop is not safe to call more than once,
but we call it from Receive in a go-routine so Receive
doesn't block.
To ensure we only call it once, we use the lastReceivedRequests
map - if an entry already exists, then FlushStop should already have
been called and we can return.
* Require addressbook to only store addresses with valid ID
* Do not shut down peer immediately after sending pex addrs in SeedMode
* p2p: fix#2773
* seed mode: use go-routine to sleep before stopping peer
Sam Kleinman
Ismail Khoffi
Aleksandr Bezobchuk
Callum Waters
Erik Grinaker
Tess Rinearson
Anton Kaliaev
Marko
dongsamb
Hongmin
Phil Salant
folex
Roman Shtylman
Alexander Simmerl
Ethan Buchman
Jae Kwon