Ethermint currently has to maintain a map height-> block hash on the store (see here) as it needs to expose the eth_getBlockByHash JSON-RPC query for Web3 compatibility. This query is currently not supported by the tendermint RPC client.
Fixes the following test race condition:
```
=== RUN TestAppCalls
TestAppCalls: rpc_test.go:216:
Error Trace: rpc_test.go:216
Error: Expected value not to be nil.
Test: TestAppCalls
--- FAIL: TestAppCalls (2.20s)
```
Closes: #4530
This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.
* rpc/client: do not pass height param if height ptr is nil
* rpc/core: validate incoming evidence!
* only accept ConflictingHeadersEvidence if one
of the headers is committed from this full node's perspective
This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.
* swap CommitSig with Vote in LunaticValidatorEvidence
Vote is needed to validate signature
* no need to embed client
http is a provider and should not be used as a client
Closes: #4695
Verify /block_results and /validators responses from an HTTP client using the light client.
Added count and total to /validators response.
Refs #3113
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
* Rename Tag(s) to Event(s)
- tag was replaced with event, but in some places it still mentions tag, would be easier to understand if we tried to replace it with event to not confuse people.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more changes from tag -> event
* rename events to compositeKeys and keys
* Apply suggestions from code review
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* add minor documentation on how composite keys are constructed
* rename eventkey to compositekey
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* add changelog entry & add info to regenerate confid to changelog entry
https://www.jsonrpc.org/specification
What is done in this PR:
JSONRPCClient: validate that Response.ID matches Request.ID I wanted
to do the same for the WSClient, but since we're sending events as
responses, not notifications, checking IDs would require storing
them in memory indefinitely (and we won't be able to remove them
upon client unsubscribing because ID is different then).
Request.ID is now optional. Notification is a Request without an ID.
Previously "" or 0 were considered as notifications
Remove #event suffix from ID from an event response (partially fixes
#2949) ID must be either string, int or null AND must be equal to
request's ID. Now, because we've implemented events as responses, WS
clients are tripping when they see Response.ID("0#event") !=
Request.ID("0"). Implementing events as requests would require a lot
of time (~ 2 days to completely rewrite WS client and server)
generate unique ID for each request
switch to integer IDs instead of "json-client-XYZ"
id=0 method=/subscribe
id=0 result=...
id=1 method=/abci_query
id=1 result=...
> send events (resulting from /subscribe) as requests+notifications (not
responses)
this will require a lot of work. probably not worth it
* rpc: generate an unique ID for each request
in conformance with JSON-RPC spec
* WSClient: check for unsolicited responses
* fix golangci warnings
* save commit
* fix errors
* remove ID from responses from subscribe
Refs #2949
* clients are safe for concurrent access
* tm-bench: switch to int ID
* fixes after my own review
* comment out sentIDs in WSClient
see commit body for the reason
* remove body.Close
it will be closed automatically
* stop ws connection outside of write/read routines
also, use t.Rate in tm-bench indexer when calculating ID
fix gocritic issues
* update swagger.yaml
* Apply suggestions from code review
* fix stylecheck and golint linter warnings
* update changelog
* update changelog2
* Add pagination to /validators
- closes#3472
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add swagger params, default returns all
* address pr comments
* golint fix
* swagger default change, change to default in comment
* swagger.yaml: replace x-example with example
https://swagger.io/docs/specification/adding-examples/
* Revert "swagger.yaml: replace x-example with example"
This reverts commit 9df1b006de.
* update changelog and remove extra body close
## Issue:
Removed BlockMeta in ResultBlock in favor of BlockId for /block
Added block_size to BlockMeta this is reflected in /blockchain
fixes#3188
added breaking as some clients may be using header from blockmeta instead of block in /block
## Commits:
* cleanup block path
Remove duplication of data in `/block`
fixes#3188
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* Remove duplication of data in `/block`
- Created a secondary type to be used for /block
fixes#3188
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* remove commented out code
* fix ci
* add changelog_pending entry
* remove extra variable
* update swagger
* change int to uint for blocksize
* fix swagger
* remove extensive comments
* update changelog
* fix conflicts after merge
* use int for BlockSize and NumTxs in BlockMeta
- with 99.9% guarantee, the size of either will never reach int32
- most of the Go "Size" stdlib functions return int
BREAKING
Example response:
```json
{
"jsonrpc": "2.0",
"id": "",
"result": {
"height": "2109",
"txs_results": null,
"begin_block_events": null,
"end_block_events": null,
"validator_updates": null,
"consensus_param_updates": null
}
}
```
Old result consisted of ABCIResponses struct and height. Exposing
internal ABCI structures (which we store in state package) in RPC seems
bad to me for the following reasons:
1) high risk of breaking the API when somebody changes internal structs
(HAPPENED HERE!)
2) RPC is aware of ABCI, which I'm not sure we want
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* Remove unnecessary type conversions
* Consolidate repeated strings into consts
* Clothe return statements
* Update blockchain/v1/reactor_fsm_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=unconvert
golangci-lint run --no-config --disable-all=true --enable=goconst
golangci-lint run --no-config --disable-all=true --enable=nakedret
Contributes to #3262
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213).
* Add JSON RPC batching for client and server
As per #3213, this adds support for [JSON RPC batch requests and
responses](https://www.jsonrpc.org/specification#batch).
* Add additional checks to ensure client responses are the same as results
* Fix case where a notification is sent and no response is expected
* Add test to check that JSON RPC notifications in a batch are left out in responses
* Update CHANGELOG_PENDING.md
* Update PR number now that PR has been created
* Make errors start with lowercase letter
* Refactor batch functionality to be standalone
This refactors the batching functionality to rather act in a standalone
way. In light of supporting concurrent goroutines making use of the same
client, it would make sense to have batching functionality where one
could create a batch of requests per goroutine and send that batch
without interfering with a batch from another goroutine.
* Add examples for simple and batch HTTP client usage
* Check errors from writer and remove nolinter directives
* Make error strings start with lowercase letter
* Refactor examples to make them testable
* Use safer deferred shutdown for example Tendermint test node
* Recompose rpcClient interface from pre-existing interface components
* Rename WaitGroup for brevity
* Replace empty ID string with request ID
* Remove extraneous test case
* Convert first letter of errors.Wrap() messages to lowercase
* Remove extraneous function parameter
* Make variable declaration terse
* Reorder WaitGroup.Done call to help prevent race conditions in the face of failure
* Swap mutex to value representation and remove initialization
* Restore empty JSONRPC string ID in response to prevent nil
* Make JSONRPCBufferedRequest private
* Revert PR hard link in CHANGELOG_PENDING
* Add client ID for JSONRPCClient
This adds code to automatically generate a randomized client ID for the
JSONRPCClient, and adds a check of the IDs in the responses (if one was
set in the requests).
* Extract response ID validation into separate function
* Remove extraneous comments
* Reorder fields to indicate clearly which are protected by the mutex
* Refactor for loop to remove indexing
* Restructure and combine loop
* Flatten conditional block for better readability
* Make multi-variable declaration slightly more readable
* Change for loop style
* Compress error check statements
* Make function description more generic to show that we support different protocols
* Preallocate memory for request and result objects
* bound mempool memory usage
Closes#3079
* rename SizeBytes to TxsTotalBytes
and other small fixes after Zarko's review
* rename MaxBytes to MaxTxsTotalBytes
* make ErrMempoolIsFull more informative
* expose mempool's txs_total_bytes via RPC
* test full response
* fixes after Ethan's review
* config: rename mempool.size to mempool.max_txs
https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004
* test more cases
https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532
* simplify test
* Revert "config: rename mempool.size to mempool.max_txs"
This reverts commit 39bfa36961.
* rename count back to n_txs
to make a change non-breaking
* rename max_txs_total_bytes to max_txs_bytes
* format code
* fix TestWALPeriodicSync
The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.
* Apply suggestions from code review
* Validating that there are txs in the query results before loop throught the array
* Created tests to validate the error has been fixed
* Added comments
* Fixing misspeling
* check if the variable "skipCount" is bigger than zero. If it is not, we set it to 0. If it, we do not do anything.
* using function that validates the skipCount variable
* undo Gopkg.lock changes
Modify lookForHeight to return a height only there's a equal operator.
Previously, it was returning a height even for range conditions: "height
< 10000".
Fixes#2759
Marko
Anton Kaliaev
Federico Kunze
Erik Grinaker
Diep Pham
Gregory Terzian
Erik Grinaker
Peter Mrekaj
Aditya
Phil Salant
gracenoah
Thane Thomson
Gian Felipe
Daniil Lashin
Hleb Albau
Joon
Zach Ramsay
Alexander Simmerl
Liamsi