* Fix long line errors in abci, crypto, and libs packages

* Fix long lines in p2p and rpc packages

* Fix long lines in abci, state, and tools packages

* Fix long lines in behaviour and blockchain packages

* Fix long lines in cmd and config packages

* Begin fixing long lines in consensus package

* Finish fixing long lines in consensus package

* Add lll exclusion for lines containing URLs

* Fix long lines in crypto package

* Fix long lines in evidence package

* Fix long lines in mempool and node packages

* Fix long lines in libs package

* Fix long lines in lite package

* Fix new long line in node package

* Fix long lines in p2p package

* Ignore gocritic warning

* Fix long lines in privval package

* Fix long lines in rpc package

* Fix long lines in scripts package

* Fix long lines in state package

* Fix long lines in tools package

* Fix long lines in types package

* Enable lll linter

* Fix maligned structs

* Fix interfacer errors

* Revert accidental go.mod and go.sum changes

* Revert P2PConfig struct maligned reorder

* Revert PeerRoundState struct maligned reordering

* Revert RoundState struct maligned reordering

* Reorder WSClient struct

* Revert accidental type change

* Clean up type change

* Clean up type changes

* Revert to types.ABCIApplicationServer in GRPCServer struct

* Revert maligned changes to BaseConfig struct

* Fix tests in io_test.go

* Fix client_test package tests

* Fix reactor tests in consensus package

* Fix new interfacer errors

* tm-monitor: tweaked formatting of start time and avg tx throughput.

* tm-monitor: update health when validator number is updated.

* Updated CHANGELOG_PENDING

* Added PR number to CHANGELOG_PENDING.

Improves `tm-monitor` formatting of start time (RFC1123 without unnecessary precision) and avg tx throughput (three decimal places). The old tx throughput display was confusing during local testing where the tx rate is low and displayed as 0.

Also updates the monitor health whenever the validator number changes. It otherwise starts with moderate health and fails to update this once it discovers the validators, leading to incorrect health reporting and invalid uptime statistics. Let me know if you would like me to submit this as a separate PR.

### Before:

```
2019-09-29 20:40:00.992834 +0200 CEST m=+0.024057059 up -92030989600.42%

Height: 2518
Avg block time: 1275.496 ms
Avg tx throughput: 0 per sec
Avg block latency: 2.464 ms
Active nodes: 4/4 (health: moderate) Validators: 4

NAME                HEIGHT     BLOCK LATENCY     ONLINE     VALIDATOR     
localhost:26657     2518       0.935 ms          true       true          
localhost:26660     2518       0.710 ms          true       true          
localhost:26662     2518       0.708 ms          true       true          
localhost:26664     2518       0.717 ms          true       true          
```

### After:

```
Sun, 29 Sep 2019 20:21:59 +0200 up 100.00%

Height: 2480
Avg block time: 1361.445 ms
Avg tx throughput: 0.735 per sec
Avg block latency: 4.232 ms
Active nodes: 4/4 (health: full) Validators: 4

NAME                HEIGHT     BLOCK LATENCY     ONLINE     VALIDATOR     
localhost:26657     2480       1.174 ms          true       true          
localhost:26660     2480       1.037 ms          true       true          
localhost:26662     2480       0.981 ms          true       true          
localhost:26664     2480       0.995 ms          true       true          
```

- in the makefile update `get_tools` was changed to just `tools`

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* Remove unnecessary type conversions

* Consolidate repeated strings into consts

* Clothe return statements

* Update blockchain/v1/reactor_fsm_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=unconvert
golangci-lint run --no-config --disable-all=true --enable=goconst
golangci-lint run --no-config --disable-all=true --enable=nakedret

Contributes to #3262

Refs #3262

cleanup to add linter

    grpc change:
        https://godoc.org/google.golang.org/grpc#WithContextDialer
        https://godoc.org/google.golang.org/grpc#WithDialer
        grpc/grpc-go#2627
    prometheous change:
        due to UninstrumentedHandler, being deprecated in the future
    empty branch = empty if or else statement
        didn't delete them entirely but commented
        couldn't find a reason to have them
    could not replicate the issue #3406
        but if want to keep it commented then we should comment out the if statement as well

* Renamed wire.go to codec.go

- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* ide error

* rename amino.go to codec.go

* Fix rpc handle for tm-monitor

Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>

* go imports file

Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>

* go imports file

Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>

* fix RPCUnmonitor too

Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>

- build docker needs go111module on
- switch to golang:1.12 to have git available

Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>

* Update to using go mod from dep

* Remove references to make get_vendor_deps

* Specify go version

* Set GO111MODULE=on and add -mod=readonly

* Fix exported env

* switch to using go1.12 everywhere

* Fix test scripts

* Typo:

* Prepend GO111MODULE=on

* remove dep cache

* Revert "remove dep cache"

This reverts commit 45117bda

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* bring back the dependency cache and change it to cache modules instead
of vendored deps; also:

 - bump version for dependency cache
 - bump version on pkg-cache (includes modules directory)

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* remove some more traces of dep:
 - remove Gopkg.(toml | lock)
 - update contributing guidlines
 - set global default in circleci (GO111MODULE=on)

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* global var failed for `test_cover` with
`go: unknown environment setting GO111MODULE=true`
although the var was `GO111MODULE: on`

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* Changelog pending entry

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* Add bbolt dependency to go.mod

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* move -mod=readonly to build flags

* Make sure config.TimeoutBroadcastTxCommit < rpcserver.WriteTimeout()

* remove redundant comment

* libs/rpc/http_server: move Read/WriteTimeout into Config

* increase defaults for read/write timeouts

Based on this article
https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration

* WriteTimeout should be larger than TimeoutBroadcastTxCommit

* set a deadline for subscribing to txs

* extract duration into const

* add two changelog entries

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* 12 -> 10

* changelog

* changelog

* libs/common: TrapSignal accepts logger as a first parameter

 and does not block anymore
* previously it was dumping "captured ..." msg to os.Stdout
* TrapSignal should not be responsible for blocking thread of execution

Refs #3238

* exit with zero (0) code upon receiving SIGTERM/SIGINT

Refs #3238

* fix formatting in docs/app-dev/abci-cli.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* fix formatting in docs/app-dev/abci-cli.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* make govet linter pass

Refs #3262

* close PipeReader and check for err

in the attempt to fix https://circleci.com/gh/tendermint/tendermint/43165

also

    code is simplified by running gofmt -s .
    remove unused vars
    enable linters we're currently passing
    remove deprecated linters

Because there's nothing worse than having to copy/paste a link from a
web page to navigate to it 😁

As per conversation here: https://github.com/tendermint/tendermint/pull/3218#discussion_r251364041

This is the result of running the following code on the repo:

```bash
find . -name '*.go' | grep -v 'vendor/' | xargs -n 1 goimports -w
```

This commit makes both EventNewBlock and EventNewBlockHeader emit tags
on the event bus, so subscribers can use them in queries.

* Decouple StartHTTP{,AndTLS}Server from Listen()

This should help solve cosmos/cosmos-sdk#2715

* Fix small mistake

* Update StartGRPCServer

* s/rpc/rpcserver/

* Start grpccore.StartGRPCServer in a goroutine

* Reinstate l.Close()

* Fix rpc/lib/test/main.go

* Update code comment

* update changelog and comments

* fix tm-monitor. more comments

Refs #2693

bump alpine version to 3.8

* lean up Makefile and remove LICENSE file
* remove k8s and build LICENSE files
* remove non-existing target

Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.

Ref discussion: https://github.com/tendermint/tendermint/pull/1966

Closes #1956

make BlockMeta Header a non-pointer

Refs #693

fixes for tools repo merge (#1943)