Co-authored-by: Emmanuel T Odeke <emmanuel@orijtech.com>
Closes#5907
- add init-corpus to blockchain reactor
- remove validator-set FromBytes test
now that we have proto, we don't need to test it! bye amino
- simplify mempool test
do we want to test remote ABCI app?
- do not recreate mux on every crash in jsonrpc test
- update p2p pex reactor test
- remove p2p/listener test
the API has changed + I did not understand what it's tested anyway
- update secretconnection test
- add readme and makefile
- list inputs in readme
- add nightly workflow
- remove blockchain fuzz test
EncodeMsg / DecodeMsg no longer exist
E2E tests often fail because validators miss signing or proposing blocks. Often this is because e.g. there's a lot of disruption in the network or it takes a long time to start up all the nodes.
This changes the test criteria to only check for 3 signed/proposed blocks, rather than a fraction of the expected blocks. This should be enough to catch most issues, apart from performance problems causing nodes to miss signing/proposing, but we may want separate tests for those sorts of things.
Conflicting votes are now sent to the evidence pool to form duplicate vote evidence only once
the height of the evidence is finished and the time of the block finalised.
blockchain/vX reactor priority was decreased because during the normal operation
(i.e. when the node is not fast syncing) blockchain priority can't be
the same as consensus reactor priority. Otherwise, it's theoretically possible to
slow down consensus by constantly requesting blocks from the node.
NOTE: ideally blockchain/vX reactor priority would be dynamic. e.g. when
the node is fast syncing, the priority is 10 (max), but when it's done
fast syncing - the priority gets decreased to 5 (only to serve blocks
for other nodes). But it's not possible now, therefore I decided to
focus on the normal operation (priority = 5).
evidence and consensus critical messages are more important than
the mempool ones, hence priorities are bumped by 1 (from 5 to 6).
statesync reactor priority was changed from 1 to 5 to be the same as
blockchain/vX priority.
Refs https://github.com/tendermint/tendermint/issues/5816
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
## Description
Hardcode ed25519 to dialTCPFn in e2e tests.
I will backport `DefaultRequestHandler` fixes
This will be replaced when grpc is implemented.
* Don't use state sync for nodes starting at initial height.
* Also remove stopped containers when cleaning up.
* Start nodes in order of startAt, mode, name to avoid full nodes starting before their seeds.
* Tweak network waiting to avoid halts caused by validator changes and perturbations.
* Disable most tests for seed nodes, which aren't always able to join consensus.
* Disable `blockchain/v2` due to known bugs.
In #5488 the E2E testnet generator changed to setting explicit `StartAt` heights for initial nodes. This broke the runner, which expected all initial nodes to have `StartAt: 0`, as well as validator set scheduling in the generator. Testnet loading now normalizes initial nodes to have `StartAt: 0`.
This also tweaks waiting for misbehavior heights to only use an additional wait if there actually is any misbehavior in the testnet, and to output information when waiting.
Closes#5291. Adds a randomized testnet generator. Nightly CI job will be submitted separately. A few of the testnets can be a bit flaky, even after disabling known-faulty behavior and making minor tweaks, and the larger networks may be too resource-intensive to run in CI - this will be optimized separately.
This was a missing test case from the old P2P tests removed in #5453, which makes sure that all nodes are able to peer with each other regardless of how they discover peers.
Fixes#2795, since the default CI testnet uses a combination of (partially meshed) persistent peers and PEX-based seed nodes.
Partial fix for #5291.
This adds a basic set of test cases for core network invariants. Although small, it is sufficient to replace and extend the current set of P2P tests. Further test cases can be added later.
Debian testing caused Docker image build failures:
```
The following packages have unmet dependencies:
libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
```
It does not appear that we actually need testing, so removing it.
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* Update makefile
- these two files were taken from the sdk with adjustments for usage in TM
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* .phony
* remove slate
* more tools
* circleci update 1/2
* fixed typo
* fixed bash error
* '<<' must be escaped in 2.1
* fixed invalid config
* removed golangci-lint from tools. runs as github app now
* one more issue in Circle config
* some more work on the Circle config
* minor changes
* fiddling with restore cache config
* fiddling with restore cache config
* added commands in circle config. makefile changes
* bash shenannigans
* bash shenannigans
* fighting the config demons
* fighting the config demons, v2
* fighting the config demons, v3
* updating p2p dockerfile
* updating p2p dockerfile
* updating p2p test
* updating p2p test
* testing circle config
* testing circle config
* remove dontcover command
* its the weekend, custom docker image
* Update to using go mod from dep
* Remove references to make get_vendor_deps
* Specify go version
* Set GO111MODULE=on and add -mod=readonly
* Fix exported env
* switch to using go1.12 everywhere
* Fix test scripts
* Typo:
* Prepend GO111MODULE=on
* remove dep cache
* Revert "remove dep cache"
This reverts commit 45117bda
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* bring back the dependency cache and change it to cache modules instead
of vendored deps; also:
- bump version for dependency cache
- bump version on pkg-cache (includes modules directory)
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* remove some more traces of dep:
- remove Gopkg.(toml | lock)
- update contributing guidlines
- set global default in circleci (GO111MODULE=on)
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* global var failed for `test_cover` with
`go: unknown environment setting GO111MODULE=true`
although the var was `GO111MODULE: on`
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Changelog pending entry
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Add bbolt dependency to go.mod
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* move -mod=readonly to build flags
* validate reactor messages
Refs #2683
* validate blockchain messages
Refs #2683
* validate evidence messages
Refs #2683
* todo
* check ProposalPOL and signature sizes
* add a changelog entry
* check addr is valid when we add it to the addrbook
* validate incoming netAddr (not just nil check!)
* fixes after Bucky's review
* check timestamps
* beef up block#ValidateBasic
* move some checks into bcBlockResponseMessage
* update Gopkg.lock
Fix
```
grouped write of manifest, lock and vendor: failed to export github.com/tendermint/go-amino: fatal: failed to unpack tree object 6dcc6ddc14
```
by running `dep ensure -update`
* bump year since now we check it
* generate test/p2p/data on the fly using tendermint testnet
* allow sync chains older than 1 year
* use full path when creating a testnet
* move testnet gen to test/docker/Dockerfile
* relax LastCommitRound check
Refs #2737
* fix conflicts after merge
* add small comment
* some ValidateBasic updates
* fixes
* AppHash length is not fixed
Anton Kaliaev
Marko
Erik Grinaker
Callum
Tess Rinearson
dongsam
Erik Grinaker
Erik Grinaker
Thane Thomson
Jack Zampolin
Zach