The MTU (Maximum Transmission Unit) for Ethernet is 1500 bytes.
The IP header and the TCP header take up 20 bytes each at least (unless
optional header fields are used) and thus the max for (non-Jumbo frame)
Ethernet is 1500 - 20 -20 = 1460
Source: https://stackoverflow.com/a/3074427/820520
While debugging the mempool issue (#5796), I've noticed we're spending
quite a bit of time encoding blobs of data, which never get printed! The
reason is filtering occurs on the level below, so Go runtime rightfully
evaluates function arguments.
I think it's okay to not format raw bytes.
The `NodeInfo` interface does not appear to serve any purpose at all, so I removed it and renamed the `DefaultNodeInfo` struct to `NodeInfo` (including the Protobuf representations). Let me know if this is actually needed for anything.
Only the Protobuf rename is listed in the changelog, since we do not officially support API stability of the `p2p` package (according to `README.md`). The on-wire protocol remains compatible.
This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog.
The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack.
The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely.
There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
closes: #5770closes: #5769
also, include node ID in the output (#5769) and modify NodeKey to use
value semantics (it makes perfect sense for NodeKey to not be a
pointer).
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
*testing.T.TempDir() causes test cases to fail when
it is unable to remove the temporary directory once
the test case execution terminates. This seems to
happen often with pex reactor test cases.
Replace defer with t.Cleanup().
Replace the combination of ioutil.TempDir, error checking
and defer os.RemoveAll() with Go testing.T's new TempDir()
helper.
Mark auxiliary functions as test helpers.
Removes `p2p.FuzzedConnection`, since it does not appear to be in use. While these sorts of test wrappers may be useful, they should be injected directly instead of bleeding through into the main application configuration. We'll implement something similar if and when necessary, for the new P2P abstractions in #2067.
## Description
When downloading mockery I ran into an issue where we were using the old version. This PR updates to a more recent version.
changelog?
Closes: #XXX
## Description
Remove secp256k1 as discussed in the tendermint dev call. The implementation has been moved to the [Cosmos-SDK](443e0c1f89/crypto/keys/secp256k1)
Closes: #XXX
## Description
This PR aims to make the crypto.PubKey interface more intuitive.
Changes:
- `VerfiyBytes` -> `VerifySignature`
Before `Bytes()` was amino encoded, now since it is the byte representation should we get rid of it entirely?
EDIT: decided to keep `Bytes()` as it is useful if you are using the interface instead of the concrete key
Closes: #XXX
## Description
Add test vectors for all reactors
- [x] state-sync
- [x] privval
- [x] mempool
- [x] p2p
- [x] evidence
- [ ] light?
this PR is primarily oriented at testvectors for things going over the wire. should we expand the testvectors into types as well?
Closes: #XXX
While working on tendermint my colleague @jinmannwong fixed a few of the unit tests that we found to be flaky in our CI. We thought that you might find this useful, see below for comments.
Closes#1581
This fixes the error in #1581, and also documents the purpose of this line. It ensures that if a peer tells us an address we know about, whose ID is the same as our current ID, we ignore it.
This removes the previous case where the ID's matched, but the IP's did not, which could yield a potential overwrite of the IP associated with the address later on. (This then would yield an eclipse attack)
This was not a vulnerability before though, thanks to a defensive check here 95fc7e58ee/p2p/pex/addrbook.go (L522))
## Description
This PR wraps the stdlib sync.(RW)Mutex & godeadlock.(RW)Mutex. This enables using go-deadlock via a build flag instead of using sed to replace sync with godeadlock in all files
Closes: #3242
- drop Height & Base from StatusRequest
It does not make sense nor it's used anywhere currently. Also, there
seem to be no trace of these fields in the ADR-40 (blockchain reactor
v2).
- change PacketMsg#EOF type from int32 to bool
## Description
partially cleanup in preparation for errcheck
i ignored a bunch of defer errors in tests but with the update to go 1.14 we can use `t.Cleanup(func() { if err := <>; err != nil {..}}` to cover those errors, I will do this in pr number two of enabling errcheck.
ref #5059
Migrates the p2p connections to Protobuf. Supersedes #4800.
gogoproto's `NewDelimitedReader()` uses an internal buffer, which makes it unsuitable for reading individual messages from a shared reader (since any remaining data in the buffer will be discarded). We therefore add a new `protoio` package with an unbuffered `NewDelimitedReader()`. Additionally, the `NewDelimitedWriter()` returns the number of bytes written, and we've added `MarshalDelimited()` and `UnmarshalDelimited()`, to ease migration of existing code.
Attempt to fix this the below test failure by waiting for the listener to get ready. I am not at all convinced that this is the correct fix - the below indicates that the TCP socket was closed after it was set up - but I'm unable to come up with an actionable hypothesis for what caused it.
```
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:44737: use of closed network connection
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:42589: use of closed network connection
2020/05/14 17:25:11 Failed to accept conn: accept tcp 127.0.0.1:40905: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:39847: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:39989: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:43587: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:35415: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:38657: use of closed network connection
2020/05/14 17:25:12 Failed to accept conn: accept tcp 127.0.0.1:38217: use of closed network connection
2020/05/14 17:25:13 Failed to accept conn: accept tcp 127.0.0.1:42247: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39705: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39491: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:37107: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39909: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:37987: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:41505: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:39121: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:46569: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:45643: use of closed network connection
2020/05/14 17:25:16 Failed to accept conn: accept tcp 127.0.0.1:35289: use of closed network connection
--- FAIL: TestTransportMultiplexAcceptMultiple (0.43s)
transport_test.go:200: auth failure: handshake failed: EOF
FAIL
```
Erik Grinaker
Anton Kaliaev
Aleksandr Bezobchuk
Tess Rinearson
Alessio Treglia
Marko
Callum Waters
n-hutton
Dev Ojha