[docs] prefix IPs with node IDs

Refs #1429

docs/deploy-testnets.rst

@@ -11,26 +11,26 @@ Manual Deployments
 
 It's relatively easy to setup a Tendermint cluster manually. The only
 requirements for a particular Tendermint node are a private key for the
-validator, stored as ``priv_validator.json``, and a list of the public
-keys of all validators, stored as ``genesis.json``. These files should
-be stored in ``~/.tendermint/config``, or wherever the ``$TMHOME`` variable
-might be set to.
+validator, stored as ``priv_validator.json``, a node key, stored as
+``node_key.json`` and a list of the public keys of all validators, stored as
+``genesis.json``. These files should be stored in ``~/.tendermint/config``, or
+wherever the ``$TMHOME`` variable might be set to.
 
 Here are the steps to setting up a testnet manually:
 
 1) Provision nodes on your cloud provider of choice
 2) Install Tendermint and the application of interest on all nodes
-3) Generate a private key for each validator using
-   ``tendermint gen_validator``
+3) Generate a private key and a node key for each validator using
+   ``tendermint init``
 4) Compile a list of public keys for each validator into a
-   ``genesis.json`` file.
+   ``genesis.json`` file and replace the existing file with it.
 5) Run ``tendermint node --p2p.persistent_peers=< peer addresses >`` on each node,
    where ``< peer addresses >`` is a comma separated list of the IP:PORT
    combination for each node. The default port for Tendermint is
    ``46656``. Thus, if the IP addresses of your nodes were
    ``192.168.0.1, 192.168.0.2, 192.168.0.3, 192.168.0.4``, the command
    would look like:
-   ``tendermint node --p2p.persistent_peers=192.168.0.1:46656,192.168.0.2:46656,192.168.0.3:46656,192.168.0.4:46656``.
+   ``tendermint node --p2p.persistent_peers=96663a3dd0d7b9d17d4c8211b191af259621c693@192.168.0.1:46656, 429fcf25974313b95673f58d77eacdd434402665@192.168.0.2:46656, 0491d373a8e0fcf1023aaf18c51d6a1d0d4f31bd@192.168.0.3:46656, f9baeaa15fedf5e1ef7448dd60f46c01f1a9e9c4@192.168.0.4:46656``.
 
 After a few seconds, all the nodes should connect to each other and start
 making blocks! For more information, see the Tendermint Networks section

docs/examples/getting-started.md

@@ -2,8 +2,9 @@
 
 ## Overview
 
-This is a quick start guide. If you have a vague idea about how Tendermint works
-and want to get started right away, continue. Otherwise, [review the documentation](http://tendermint.readthedocs.io/en/master/)
+This is a quick start guide. If you have a vague idea about how Tendermint
+works and want to get started right away, continue. Otherwise, [review the
+documentation](http://tendermint.readthedocs.io/en/master/).
 
 ## Install
 
@@ -42,7 +43,7 @@ Confirm installation:
 
 ```
 $ tendermint version
-0.15.0-381fe19
+0.18.0-XXXXXXX
 ```
 
 ## Initialization
@@ -117,7 +118,9 @@ where the value is returned in hex.
 
 ## Cluster of Nodes
 
-First create four Ubuntu cloud machines. The following was tested on Digital Ocean Ubuntu 16.04 x64 (3GB/1CPU, 20GB SSD). We'll refer to their respective IP addresses below as IP1, IP2, IP3, IP4.
+First create four Ubuntu cloud machines. The following was tested on Digital
+Ocean Ubuntu 16.04 x64 (3GB/1CPU, 20GB SSD). We'll refer to their respective IP
+addresses below as IP1, IP2, IP3, IP4.
 
 Then, `ssh` into each machine, and execute [this script](https://git.io/vNLfY):
 
@@ -131,12 +134,16 @@ This will install `go` and other dependencies, get the Tendermint source code, t
 Next, `cd` into `docs/examples`. Each command below should be run from each node, in sequence:
 
 ```
-tendermint node --home ./node1 --proxy_app=kvstore --p2p.seeds IP1:46656,IP2:46656,IP3:46656,IP4:46656
-tendermint node --home ./node2 --proxy_app=kvstore --p2p.seeds IP1:46656,IP2:46656,IP3:46656,IP4:46656
-tendermint node --home ./node3 --proxy_app=kvstore --p2p.seeds IP1:46656,IP2:46656,IP3:46656,IP4:46656
-tendermint node --home ./node4 --proxy_app=kvstore --p2p.seeds IP1:46656,IP2:46656,IP3:46656,IP4:46656
+tendermint node --home ./node1 --proxy_app=kvstore --p2p.persistent_peers="3a558bd6f8c97453aa6c2372bb800e8b6ed8e6db@IP1:46656,ccf30d873fddda10a495f42687c8f33472a6569f@IP2:46656,9a4c3de5d6788a76c6ee3cd9ff41e3b45b4cfd14@IP3:46656,58e6f2ab297b3ceae107ba4c8c2898da5c009ff4@IP4:46656"
+tendermint node --home ./node2 --proxy_app=kvstore --p2p.persistent_peers="3a558bd6f8c97453aa6c2372bb800e8b6ed8e6db@IP1:46656,ccf30d873fddda10a495f42687c8f33472a6569f@IP2:46656,9a4c3de5d6788a76c6ee3cd9ff41e3b45b4cfd14@IP3:46656,58e6f2ab297b3ceae107ba4c8c2898da5c009ff4@IP4:46656"
+tendermint node --home ./node3 --proxy_app=kvstore --p2p.persistent_peers="3a558bd6f8c97453aa6c2372bb800e8b6ed8e6db@IP1:46656,ccf30d873fddda10a495f42687c8f33472a6569f@IP2:46656,9a4c3de5d6788a76c6ee3cd9ff41e3b45b4cfd14@IP3:46656,58e6f2ab297b3ceae107ba4c8c2898da5c009ff4@IP4:46656"
+tendermint node --home ./node4 --proxy_app=kvstore --p2p.persistent_peers="3a558bd6f8c97453aa6c2372bb800e8b6ed8e6db@IP1:46656,ccf30d873fddda10a495f42687c8f33472a6569f@IP2:46656,9a4c3de5d6788a76c6ee3cd9ff41e3b45b4cfd14@IP3:46656,58e6f2ab297b3ceae107ba4c8c2898da5c009ff4@IP4:46656"
 ```
 
-Note that after the third node is started, blocks will start to stream in because >2/3 of validators (defined in the `genesis.json`) have come online. Seeds can also be specified in the `config.toml`. See [this PR](https://github.com/tendermint/tendermint/pull/792) for more information about configuration options.
+Note that after the third node is started, blocks will start to stream in
+because >2/3 of validators (defined in the `genesis.json`) have come online.
+Seeds can also be specified in the `config.toml`. See [this
+PR](https://github.com/tendermint/tendermint/pull/792) for more information
+about configuration options.
 
 Transactions can then be sent as covered in the single, local node example above.

docs/examples/install_tendermint.sh

@@ -26,7 +26,7 @@ go get $REPO
 cd $GOPATH/src/$REPO
 
 ## build
-git checkout v0.17.0
+git checkout v0.18.0
 make get_tools
 make get_vendor_deps
 make install

docs/examples/node1/node_key.json

@@ -0,0 +1,6 @@
+{
+   "priv_key" : {
+      "data" : "DA9BAABEA7211A6D93D9A1986B4279EAB3021FAA1653D459D53E6AB4D1CFB4C69BF7D52E48CF00AC5779AA0A6D3C368955D5636A677F72370B8ED19989714CFC",
+      "type" : "ed25519"
+   }
+}

docs/examples/node2/node_key.json

@@ -0,0 +1,6 @@
+{
+   "priv_key" : {
+      "data" : "F7BCABA165DFC0DDD50AE563EFB285BAA236EA805D35612504238A36EFA105958756442B1D9F942D7ABD259F2D59671657B6378E9C7194342A7AAA47A66D1E95",
+      "type" : "ed25519"
+   }
+}

docs/examples/node3/node_key.json

@@ -0,0 +1,6 @@
+{
+   "priv_key" : {
+      "data" : "95136FCC97E4446B3141EDF9841078107ECE755E99925D79CCBF91085492680B3CA1034D9917DF1DED4E4AB2D9BC225919F6CB2176F210D2368697CC339DF4E7",
+      "type" : "ed25519"
+   }
+}

docs/examples/node4/node_key.json

@@ -0,0 +1,6 @@
+{
+   "priv_key" : {
+      "data" : "8895D6C9A1B46AB83A8E2BAE2121B8C3E245B9E9126EBD797FEAC5058285F2F64FDE2E8182C88AD5185A49D837C581465D57BD478C41865A66D7D9742D8AEF57",
+      "type" : "ed25519"
+   }
+}

docs/using-tendermint.rst

@@ -81,13 +81,13 @@ We can see the chain's status at the ``/status`` end-point:
 
 ::
 
-    curl http://localhost:46657/status |  jsonpp
+    curl http://localhost:46657/status | jsonpp
 
 and the ``latest_app_hash`` in particular:
 
 ::
 
-    curl http://localhost:46657/status |  jsonpp | grep app_hash
+    curl http://localhost:46657/status | jsonpp | grep app_hash
 
 Visit http://localhost:46657 in your browser to see the list of other
 endpoints. Some take no arguments (like ``/status``), while others
@@ -185,7 +185,7 @@ once per second, it is possible to disable empty blocks or set a block creation
 interval. In the former case, blocks will be created when there are new
 transactions or when the AppHash changes.
 
-To configure Tendermint to not produce empty blocks unless there are 
+To configure Tendermint to not produce empty blocks unless there are
 transactions or the app hash changes, run Tendermint with this additional flag:
 
 ::
@@ -334,14 +334,14 @@ For instance,
 
 ::
 
-    tendermint node --p2p.seeds "1.2.3.4:46656,5.6.7.8:46656"
+    tendermint node --p2p.seeds "f9baeaa15fedf5e1ef7448dd60f46c01f1a9e9c4@1.2.3.4:46656,0491d373a8e0fcf1023aaf18c51d6a1d0d4f31bd@5.6.7.8:46656"
 
 Alternatively, you can use the ``/dial_seeds`` endpoint of the RPC to
 specify seeds for a running node to connect to:
 
 ::
 
-    curl 'localhost:46657/dial_seeds?seeds=\["1.2.3.4:46656","5.6.7.8:46656"\]'
+    curl 'localhost:46657/dial_seeds?seeds=\["f9baeaa15fedf5e1ef7448dd60f46c01f1a9e9c4@1.2.3.4:46656","0491d373a8e0fcf1023aaf18c51d6a1d0d4f31bd@5.6.7.8:46656"\]'
 
 Note, if the peer-exchange protocol (PEX) is enabled (default), you should not
 normally need seeds after the first start. Peers will be gossipping about known
@@ -355,8 +355,8 @@ core instance.
 
 ::
 
-    tendermint node --p2p.persistent_peers "10.11.12.13:46656,10.11.12.14:46656"
-    curl 'localhost:46657/dial_peers?persistent=true&peers=\["1.2.3.4:46656","5.6.7.8:46656"\]'
+    tendermint node --p2p.persistent_peers "429fcf25974313b95673f58d77eacdd434402665@10.11.12.13:46656,96663a3dd0d7b9d17d4c8211b191af259621c693@10.11.12.14:46656"
+    curl 'localhost:46657/dial_peers?persistent=true&peers=\["429fcf25974313b95673f58d77eacdd434402665@10.11.12.13:46656","96663a3dd0d7b9d17d4c8211b191af259621c693@10.11.12.14:46656"\]'
 
 Adding a Non-Validator
 ~~~~~~~~~~~~~~~~~~~~~~