From 4462e2697ca057a3ad3471dcf7ca8148e72ea560 Mon Sep 17 00:00:00 2001
From: Erik Grinaker <erik@interchain.berlin>
Date: Mon, 5 Oct 2020 17:52:01 +0200
Subject: [PATCH] test: remove P2P tests (#5453)

---
 .circleci/config.yml                 |  44 +++-------
 .github/workflows/net.yml            |  28 ------
 scripts/localnet-blocks-test.sh      |  41 ---------
 test/README.md                       |   6 --
 test/p2p/README.md                   |  66 --------------
 test/p2p/address.sh                  |  28 ------
 test/p2p/atomic_broadcast/test.sh    |  76 ----------------
 test/p2p/basic/test.sh               |  76 ----------------
 test/p2p/circleci.sh                 |  55 ------------
 test/p2p/client.sh                   |  26 ------
 test/p2p/dsrr/check_peer.sh          |  64 --------------
 test/p2p/dsrr/test.sh                |  13 ---
 test/p2p/dsrr/test_peer.sh           |  65 --------------
 test/p2p/fast_sync/check_peer.sh     |  44 ----------
 test/p2p/fast_sync/test.sh           |  15 ----
 test/p2p/fast_sync/test_peer.sh      |  39 ---------
 test/p2p/kill_all/check_peers.sh     |  50 -----------
 test/p2p/kill_all/test.sh            |  31 -------
 test/p2p/local_testnet_start.sh      |  27 ------
 test/p2p/local_testnet_stop.sh       |  12 ---
 test/p2p/peer.sh                     |  53 ------------
 test/p2p/persistent_peers.sh         |  12 ---
 test/p2p/pex/check_peer.sh           |  18 ----
 test/p2p/pex/dial_peers.sh           |  22 -----
 test/p2p/pex/test.sh                 |  14 ---
 test/p2p/pex/test_addrbook.sh        |  67 ---------------
 test/p2p/pex/test_dial_peers.sh      |  38 --------
 test/p2p/test.sh                     |  45 ----------
 test/persist/test_failure_indices.sh | 124 ---------------------------
 test/persist/test_simple.sh          |  70 ---------------
 test/persist/txs.sh                  |  23 -----
 tests.mk                             |  43 ----------
 32 files changed, 10 insertions(+), 1325 deletions(-)
 delete mode 100644 .github/workflows/net.yml
 delete mode 100755 scripts/localnet-blocks-test.sh
 delete mode 100644 test/p2p/README.md
 delete mode 100755 test/p2p/address.sh
 delete mode 100644 test/p2p/atomic_broadcast/test.sh
 delete mode 100755 test/p2p/basic/test.sh
 delete mode 100644 test/p2p/circleci.sh
 delete mode 100644 test/p2p/client.sh
 delete mode 100644 test/p2p/dsrr/check_peer.sh
 delete mode 100644 test/p2p/dsrr/test.sh
 delete mode 100644 test/p2p/dsrr/test_peer.sh
 delete mode 100644 test/p2p/fast_sync/check_peer.sh
 delete mode 100644 test/p2p/fast_sync/test.sh
 delete mode 100644 test/p2p/fast_sync/test_peer.sh
 delete mode 100644 test/p2p/kill_all/check_peers.sh
 delete mode 100644 test/p2p/kill_all/test.sh
 delete mode 100644 test/p2p/local_testnet_start.sh
 delete mode 100644 test/p2p/local_testnet_stop.sh
 delete mode 100644 test/p2p/peer.sh
 delete mode 100644 test/p2p/persistent_peers.sh
 delete mode 100644 test/p2p/pex/check_peer.sh
 delete mode 100644 test/p2p/pex/dial_peers.sh
 delete mode 100644 test/p2p/pex/test.sh
 delete mode 100644 test/p2p/pex/test_addrbook.sh
 delete mode 100644 test/p2p/pex/test_dial_peers.sh
 delete mode 100644 test/p2p/test.sh
 delete mode 100644 test/persist/test_failure_indices.sh
 delete mode 100644 test/persist/test_simple.sh
 delete mode 100644 test/persist/txs.sh

diff --git a/.circleci/config.yml b/.circleci/config.yml
index 779d0a288..cfcd25756 100644
--- a/.circleci/config.yml
+++ b/.circleci/config.yml
@@ -72,30 +72,6 @@ jobs:
           paths:
             - "."
 
-  test_persistence:
-    executor: golang
-    steps:
-      - run_test:
-          script_path: test/persist/test_failure_indices.sh
-
-  test_p2p:
-    environment:
-      GOBIN: /home/circleci/.go_workspace/bin
-      GOPATH: /home/circleci/.go_workspace
-    machine:
-      image: circleci/classic:latest
-    parameters:
-      ipv:
-        type: integer
-        default: 4
-    steps:
-      - checkout
-      - run: mkdir -p $GOPATH/src/github.com/tendermint
-      - run: ln -sf /home/circleci/project $GOPATH/src/github.com/tendermint/tendermint
-      - run: bash test/p2p/circleci.sh << parameters.ipv >>
-      - store_artifacts:
-          path: /home/circleci/project/test/p2p/logs
-
   deploy_docs:
     executor: docs
     steps:
@@ -234,7 +210,7 @@ jobs:
 
 workflows:
   version: 2
-  test-suite:
+  docs:
     jobs:
       - deploy_docs:
           context: tendermint-docs
@@ -251,24 +227,24 @@ workflows:
             branches:
               only:
                 - docs-staging
-      - setup_dependencies
-      - test_persistence:
-          requires:
-            - setup_dependencies
-      - test_p2p
-      - test_p2p:
-          name: test_p2p_ipv6
-          ipv: 6
       # - contract_tests:
       #     requires:
       #       - setup_dependencies
 
   release:
     jobs:
-      - prepare_build
+      - prepare_build:
+          filters:
+            branches:
+              only:
+                - /v[0-9]+\.[0-9]+/
       - build_artifacts:
           requires:
             - prepare_build
+          filters:
+            branches:
+              only:
+                - /v[0-9]+\.[0-9]+/
       - release_artifacts:
           requires:
             - prepare_build
diff --git a/.github/workflows/net.yml b/.github/workflows/net.yml
deleted file mode 100644
index 55ea5542d..000000000
--- a/.github/workflows/net.yml
+++ /dev/null
@@ -1,28 +0,0 @@
-name: Net
-# Net creates a 4 node test network with docker-compose
-# This workflow is run on every pull request, if a *{.go, .mod, .sum} file has been modified, and push to master and release/** branches
-on:
-  pull_request:
-    paths:
-      - "**.go"
-      - "**.mod"
-      - "**.sum"
-  push:
-    branches:
-      - master
-      - release/**
-
-jobs:
-  net-short:
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    steps:
-      - uses: actions/checkout@v2
-      - name: 10 Blocks
-        run: |
-          set -x
-          docker run --rm -v "$PWD":/go/src/github.com/tendermint/tendermint -w /go/src/github.com/tendermint/tendermint golang make build-linux
-          make localnet-start &
-          ./scripts/localnet-blocks-test.sh 40 5 10 localhost
-
-# Decide if we want to run longer lived testnets
diff --git a/scripts/localnet-blocks-test.sh b/scripts/localnet-blocks-test.sh
deleted file mode 100755
index a33ab00f3..000000000
--- a/scripts/localnet-blocks-test.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-ITERATIONS=$1
-SLEEP=$2
-NUMBLOCKS=$3
-NODEADDR=$4
-
-if [ -z "$1" ]; then
-  echo "Need to input number of iterations to run..."
-  exit 1
-fi
-
-if [ -z "$2" ]; then
-  echo "Need to input number of seconds to sleep between iterations"
-  exit 1
-fi
-
-if [ -z "$3" ]; then
-  echo "Need to input block height to declare completion..."
-  exit 1
-fi
-
-if [ -z "$4" ]; then
-  echo "Need to input node address to poll..."
-  exit 1
-fi
-
-I=0
-while [ ${I} -lt "$ITERATIONS" ]; do
-  var=$(curl -s "$NODEADDR:26657/status" | jq -r ".result.sync_info.latest_block_height")
-  echo "Number of Blocks: ${var}"
-  if [ ! -z "${var}" ] && [ "${var}" -gt "${NUMBLOCKS}" ]; then
-    echo "Number of blocks reached, exiting success..."
-    exit 0
-  fi
-	I=$((I+1))
-  sleep "$SLEEP"
-done
-
-echo "Timeout reached, exiting failure..."
-exit 1
diff --git a/test/README.md b/test/README.md
index 4f5b1379a..0e0d666e5 100644
--- a/test/README.md
+++ b/test/README.md
@@ -14,9 +14,3 @@ and run the following tests in docker containers:
     - counter app over grpc
 - persistence tests
     - crash tendermint at each of many predefined points, restart, and ensure it syncs properly with the app
-- p2p tests
-    - start a local kvstore app testnet on a docker network (requires docker version 1.10+)
-    - send a tx on each node and ensure the state root is updated on all of them
-    - crash and restart nodes one at a time and ensure they can sync back up (via fastsync)
-    - crash and restart all nodes at once and ensure they can sync back up
-    - restart each nodes with double_sign_check_height and ensure panic if the same consensus key was used to sign in double_sign_check_height blocks
diff --git a/test/p2p/README.md b/test/p2p/README.md
deleted file mode 100644
index 0b1f7326d..000000000
--- a/test/p2p/README.md
+++ /dev/null
@@ -1,66 +0,0 @@
-# Tendermint P2P Tests
-
-These scripts facilitate setting up and testing a local testnet using docker containers.
-
-Setup your own local testnet as follows.
-
-For consistency, we assume all commands are run from the Tendermint repository root.
-
-First, build the docker image:
-
-```sh
-docker build -t tendermint_tester -f ./test/docker/Dockerfile .
-```
-
-Now create the docker network:
-
-```sh
-docker network create --driver bridge --subnet 172.57.0.0/16 my_testnet
-```
-
-This gives us a new network with IP addresses in the rage `172.57.0.0 - 172.57.255.255`.
-Peers on the network can have any IP address in this range.
-For our four node network, let's pick `172.57.0.101 - 172.57.0.104`.
-Since we use Tendermint's default listening port of 26656, our list of seed nodes will look like:
-
-```sh
-172.57.0.101:26656,172.57.0.102:26656,172.57.0.103:26656,172.57.0.104:26656
-```
-
-Now we can start up the peers. We already have config files setup in `test/p2p/data/`.
-Let's use a for-loop to start our peers:
-
-```sh
-for i in $(seq 1 4); do
-	docker run -d \
-	  --net=my_testnet\
-	  --ip="172.57.0.$((100 + $i))" \
-	  --name local_testnet_$i \
-	  --entrypoint tendermint \
-	  -e TMHOME=/go/src/github.com/tendermint/tendermint/test/p2p/data/mach$((i-1)) \
-	  tendermint_tester node --p2p.persistent_peers 172.57.0.101:26656,172.57.0.102:26656,172.57.0.103:26656,172.57.0.104:26656 --proxy_app=kvstore
-done
-```
-
-If you now run `docker ps`, you'll see your containers!
-
-We can confirm they are making blocks by checking the `/status` message using `curl` and `jq` to pretty print the output json:
-
-```sh
-curl 172.57.0.101:26657/status | jq .
-```
-
-## IPv6 tests
-
-IPv6 tests require a Docker daemon with IPv6 enabled, by setting the following in `daemon.json`:
-
-```json
-{
-  "ipv6": true,
-  "fixed-cidr-v6": "2001:db8:1::/64"
-}
-```
-
-In Docker for Mac, this is done via Preferences → Docker Engine.
-
-Once set, run IPv6 tests via `make test_p2p_ipv6`.
diff --git a/test/p2p/address.sh b/test/p2p/address.sh
deleted file mode 100755
index 0b0248db2..000000000
--- a/test/p2p/address.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#! /bin/bash
-set -eu
-
-IPV=$1
-ID=$2
-PORT=${3:-}
-DOCKER_IMAGE=${4:-}
-
-if [[ "$IPV" == 6 ]]; then
-    ADDRESS="fd80:b10c::"
-else
-    ADDRESS="172.57.0."
-fi
-ADDRESS="$ADDRESS$((100+$ID))"
-
-if [[ -n "$PORT" ]]; then
-    if [[ "$IPV" == 6 ]]; then
-        ADDRESS="[$ADDRESS]"
-    fi
-    ADDRESS="$ADDRESS:$PORT"
-fi
-
-if [[ -n "$DOCKER_IMAGE" ]]; then
-    NODEID="$(docker run --rm -e TMHOME=/go/src/github.com/tendermint/tendermint/test/p2p/data/mach$((ID-1)) $DOCKER_IMAGE tendermint show_node_id)"
-    ADDRESS="$NODEID@$ADDRESS"
-fi
-
-echo $ADDRESS
\ No newline at end of file
diff --git a/test/p2p/atomic_broadcast/test.sh b/test/p2p/atomic_broadcast/test.sh
deleted file mode 100644
index a93067c3d..000000000
--- a/test/p2p/atomic_broadcast/test.sh
+++ /dev/null
@@ -1,76 +0,0 @@
-#! /bin/bash
-set -u
-
-IPV=$1
-N=$2
-
-###################################################################
-# assumes peers are already synced up
-# test sending txs
-# for each peer:
-#	send a tx, wait for commit
-#	assert app hash on every peer reflects the post tx state
-###################################################################
-
-echo ""
-# run the test on each of them
-for i in $(seq 1 "$N"); do
-    addr=$(test/p2p/address.sh $IPV $i 26657)
-
-    # current state
-    HASH1=$(curl -s "$addr/status" | jq .result.sync_info.latest_app_hash)
-
-    # - send a tx
-    TX=aadeadbeefbeefbeef0$i
-    echo "Broadcast Tx $TX"
-    curl -s "$addr/broadcast_tx_commit?tx=0x$TX"
-    echo ""
-
-    # we need to wait another block to get the new app_hash
-    h1=$(curl -s "$addr/status" | jq .result.sync_info.latest_block_height | jq fromjson)
-    h2=$h1
-    while [ "$h2" == "$h1" ]; do
-        sleep 1
-        h2=$(curl -s "$addr/status" | jq .result.sync_info.latest_block_height | jq fromjson)
-    done
-
-    # wait for all other peers to get to this height
-    minHeight=$h2
-    for j in $(seq 1 "$N"); do
-        if [[ "$i" != "$j" ]]; then
-            addrJ=$(test/p2p/address.sh $IPV $j 26657)
-
-            h=$(curl -s "$addrJ/status" | jq .result.sync_info.latest_block_height | jq fromjson)
-            while [ "$h" -lt "$minHeight" ]; do
-                sleep 1
-                h=$(curl -s "$addrJ/status" | jq .result.sync_info.latest_block_height | jq fromjson)
-            done
-        fi
-    done
-
-    # check that hash was updated
-    HASH2=$(curl -s "$addr/status" | jq .result.sync_info.latest_app_hash)
-    if [[ "$HASH1" == "$HASH2" ]]; then
-        echo "Expected state hash to update from $HASH1. Got $HASH2"
-        exit 1
-    fi
-
-    # check we get the same new hash on all other nodes
-    for j in $(seq 1 "$N"); do
-        if [[ "$i" != "$j" ]]; then
-            addrJ=$(test/p2p/address.sh $IPV $j 26657)
-            HASH3=$(curl -s "$addrJ/status" | jq .result.sync_info.latest_app_hash)
-
-            if [[ "$HASH2" != "$HASH3" ]]; then
-                echo "App hash for node $j doesn't match. Got $HASH3, expected $HASH2"
-                exit 1
-            fi
-        fi
-    done
-
-    echo "All nodes are up to date"
-done
-
-echo ""
-echo "PASS"
-echo ""
diff --git a/test/p2p/basic/test.sh b/test/p2p/basic/test.sh
deleted file mode 100755
index 676b5cbe6..000000000
--- a/test/p2p/basic/test.sh
+++ /dev/null
@@ -1,76 +0,0 @@
-#! /bin/bash
-set -u
-
-IPV=$1
-N=$2
-
-###################################################################
-# wait for all peers to come online
-# for each peer:
-# 	wait to have N-1 peers
-#	wait to be at height > 1
-###################################################################
-
-# wait 60s per step per peer
-MAX_SLEEP=60
-
-# wait for everyone to come online
-echo "Waiting for nodes to come online"
-for i in `seq 1 $N`; do
-	addr=$(test/p2p/address.sh $IPV $i 26657)
-	curl -s $addr/status > /dev/null
-	ERR=$?
-	COUNT=0
-	while [ "$ERR" != 0 ]; do
-		sleep 1
-		curl -s $addr/status > /dev/null
-		ERR=$?
-		COUNT=$((COUNT+1))
-		if [ "$COUNT" -gt "$MAX_SLEEP" ]; then
-			echo "Waited too long for node $i to come online"
-			exit 1
-		fi
-	done
-	echo "... node $i is up"
-done
-
-echo ""
-# wait for each of them to sync up
-for i in `seq 1 $N`; do
-	addr=$(test/p2p/address.sh $IPV $i 26657)
-	N_1=$(($N - 1))
-
-	# - assert everyone has N-1 other peers
-	N_PEERS=`curl -s $addr/net_info | jq '.result.peers | length'`
-	COUNT=0
-	while [ "$N_PEERS" != $N_1 ]; do
-		echo "Waiting for node $i to connect to all peers ..."
-		sleep 1
-		N_PEERS=`curl -s $addr/net_info | jq '.result.peers | length'`
-		COUNT=$((COUNT+1))
-		if [ "$COUNT" -gt "$MAX_SLEEP" ]; then
-			echo "Waited too long for node $i to connect to all peers"
-			exit 1
-		fi
-	done
-
-	# - assert block height is greater than 1
-	BLOCK_HEIGHT=`curl -s $addr/status | jq .result.sync_info.latest_block_height | jq fromjson`
-	COUNT=0
-	echo "$$BLOCK_HEIGHT IS $BLOCK_HEIGHT"
-	while [ "$BLOCK_HEIGHT" -le 1 ]; do
-		echo "Waiting for node $i to commit a block ..."
-		sleep 1
-		BLOCK_HEIGHT=`curl -s $addr/status | jq .result.sync_info.latest_block_height | jq fromjson`
-		COUNT=$((COUNT+1))
-		if [ "$COUNT" -gt "$MAX_SLEEP" ]; then
-			echo "Waited too long for node $i to commit a block"
-			exit 1
-		fi
-	done
-	echo "Node $i is connected to all peers and at block $BLOCK_HEIGHT"
-done
-
-echo ""
-echo "PASS"
-echo ""
diff --git a/test/p2p/circleci.sh b/test/p2p/circleci.sh
deleted file mode 100644
index fe8a972bd..000000000
--- a/test/p2p/circleci.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#! /bin/bash
-set -eux
-
-# Take IP version as parameter
-IPV="${1:-4}"
-
-# Get the directory of where this script is.
-SOURCE="${BASH_SOURCE[0]}"
-while [ -h "$SOURCE" ] ; do SOURCE="$(readlink "$SOURCE")"; done
-DIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )"
-
-# Enable IPv6 support in Docker daemon
-if [[ "$IPV" == "6" ]]; then
-	echo
-	echo "* [$(date +"%T")] enabling IPv6 stack in Docker daemon"
-	cat <<'EOF' | sudo tee /etc/docker/daemon.json
-{
-	"ipv6": true,
-	"fixed-cidr-v6": "2001:db8:1::/64"
-}
-EOF
-	sudo service docker restart
-fi
-
-LOGS_DIR="$DIR/logs"
-echo
-echo "* [$(date +"%T")] cleaning up $LOGS_DIR"
-rm -rf "$LOGS_DIR"
-mkdir -p "$LOGS_DIR"
-
-set +e
-echo
-echo "* [$(date +"%T")] removing run_test container"
-docker rm -vf run_test
-set -e
-
-echo
-echo "* [$(date +"%T")] starting rsyslog container"
-docker rm -f rsyslog || true
-docker run -d -v "$LOGS_DIR:/var/log/" -p 127.0.0.1:5514:514/udp --name rsyslog voxxit/rsyslog
-
-set +u
-if [[ "$SKIP_BUILD" == "" ]]; then
-	echo
-	echo "* [$(date +"%T")] building docker image"
-	bash "$DIR/../docker/build.sh"
-fi
-
-echo
-echo "* [$(date +"%T")] running IPv$IPV p2p tests on a local docker network"
-bash "$DIR/../p2p/test.sh" tester $IPV
-
-echo
-echo "* [$(date +"%T")] copying log files out of docker container into $LOGS_DIR"
-docker cp rsyslog:/var/log $LOGS_DIR
diff --git a/test/p2p/client.sh b/test/p2p/client.sh
deleted file mode 100644
index b3c907fba..000000000
--- a/test/p2p/client.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-ID=$4
-CMD=$5
-
-NAME=test_container_$ID
-
-if [[ "$IPV" == 6 ]]; then
-	IP_SWITCH="--ip6"
-else
-	IP_SWITCH="--ip"
-fi
-
-echo "starting test client container with CMD=$CMD"
-# run the test container on the local network
-docker run -t --rm \
-	-v "$PWD/test/p2p/:/go/src/github.com/tendermint/tendermint/test/p2p" \
-	--net="$NETWORK_NAME" \
-	$IP_SWITCH=$(test/p2p/address.sh $IPV -1) \
-	--name "$NAME" \
-	--entrypoint bash \
-	"$DOCKER_IMAGE" $CMD
diff --git a/test/p2p/dsrr/check_peer.sh b/test/p2p/dsrr/check_peer.sh
deleted file mode 100644
index fdd6bd3a3..000000000
--- a/test/p2p/dsrr/check_peer.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#! /bin/bash
-set -eu
-set -o pipefail
-
-IPV=$1
-ID=$2
-ASSERT_CASE=$3
-ASSERT_NODE_UP=1
-ASSERT_NODE_DOWN=0
-MAX_TRY=10
-
-
-###########################################
-#
-# Wait for peer to catchup to other peers
-#
-###########################################
-
-addr=$(test/p2p/address.sh $IPV $ID 26657)
-peerID=$(( $(($ID % 4)) + 1  )) # 1->2 ... 3->4 ... 4->1
-peer_addr=$(test/p2p/address.sh $IPV $peerID 26657)
-
-# get another peer's height
-h1=`curl -s $peer_addr/status | jq .result.sync_info.latest_block_height | jq fromjson`
-
-# get another peer's state
-root1=`curl -s $peer_addr/status | jq .result.sync_info.latest_app_hash`
-
-echo "Other peer is on height $h1 with state $root1"
-echo "Waiting for peer $ID to catch up"
-
-# wait for it to sync to past its previous height
-set +e
-set +o pipefail
-h2="0"
-COUNT=0
-while [[ "$h2" -lt "$(($h1+1))" ]]; do
-	sleep 1
-	h2=`curl -s $addr/status --connect-timeout 1 | jq .result.sync_info.latest_block_height | jq fromjson`
-	COUNT=$((COUNT+1))
-	echo "... $h2, try $COUNT"
-	if [ "$COUNT" -ge "$MAX_TRY" ]; then
-		if [ $ASSERT_CASE -eq $ASSERT_NODE_DOWN ]; then
-			echo "double sign risk reduction operates normally as expected"
-		fi
-		if [ $ASSERT_CASE -eq $ASSERT_NODE_UP ]; then
-			echo "double sign risk reduction fail"
-			exit 1
-		fi
-		break
-	fi
-done
-
-
-if [ $ASSERT_CASE -eq $ASSERT_NODE_UP ]; then
-	# check the app hash
-	root2=`curl -s $addr/status | jq .result.sync_info.latest_app_hash`
-
-	if [[ "$root1" != "$root2" ]]; then
-		echo "App hash after restart does not match. Got $root2; expected $root1"
-		exit 1
-	fi
-	echo "... double sign risk reduction test passed"
-fi
diff --git a/test/p2p/dsrr/test.sh b/test/p2p/dsrr/test.sh
deleted file mode 100644
index 6f28f6c06..000000000
--- a/test/p2p/dsrr/test.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-PROXY_APP=$5
-
-# run it on each of them
-for i in `seq 1 $N`; do
-	bash test/p2p/dsrr/test_peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $i $N $PROXY_APP
-done
diff --git a/test/p2p/dsrr/test_peer.sh b/test/p2p/dsrr/test_peer.sh
deleted file mode 100644
index 4194c3c9a..000000000
--- a/test/p2p/dsrr/test_peer.sh
+++ /dev/null
@@ -1,65 +0,0 @@
-#! /bin/bash
-set -eu
-set -o pipefail
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-ID=$4
-N=$5
-PROXY_APP=$6
-ASSERT_NODE_UP=1
-ASSERT_NODE_DOWN=0
-
-###########################s####################################
-# this runs on each peer:
-# 	kill peer
-# 	bring it back online with double_sign_check_height 10
-# 	wait node is not run by double sign risk reduction
-#
-# 	kill peer
-# 	bring it back online with double_sign_check_height 1
-# 	pass double sign risk reduction, wait for it to sync and check the app hash
-#
-# 	kill peer
-# 	bring it back online with double_sign_check_height 0
-# 	wait for it to sync and check the app hash
-###############################################################
-
-echo "Testing double sign risk reduction on node $ID"
-
-# kill peer
-set +e
-	docker rm -vf local_testnet_$ID
-	set -e
-	PERSISTENT_PEERS="$(test/p2p/address.sh $IPV 1 26656 $DOCKER_IMAGE)"
-	for j in `seq 2 $N`; do
-		PERSISTENT_PEERS="$PERSISTENT_PEERS,$(test/p2p/address.sh $IPV $j 26656 $DOCKER_IMAGE)"
-	done
-
-	# bring it back online with double_sign_check_height 10
-	# wait node is not run by double sign risk reduction
-	DSCH=10
-	bash test/p2p/peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $ID $PROXY_APP "--p2p.persistent_peers $PERSISTENT_PEERS --p2p.pex --rpc.unsafe --consensus.double_sign_check_height $DSCH"
-	bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV fs_$ID "test/p2p/dsrr/check_peer.sh $IPV $ID $ASSERT_NODE_DOWN"
-
-
-	docker stop local_testnet_$ID
-	docker rm local_testnet_$ID
-	# bring it back online with double_sign_check_height 1
-	# pass double sign risk reduction, wait for it to sync and check the app hash
-	DSCH=1
-	bash test/p2p/peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $ID $PROXY_APP "--p2p.persistent_peers $PERSISTENT_PEERS --p2p.pex --rpc.unsafe --consensus.double_sign_check_height $DSCH"
-	bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV fs_$ID "test/p2p/dsrr/check_peer.sh $IPV $ID $ASSERT_NODE_UP"
-
-	docker stop local_testnet_$ID
-	docker rm local_testnet_$ID
-	DSCH=0
-	# bring it back online with double_sign_check_height 0
-	# double sign risk reduction is not activated, wait for it to sync and check the app hash
-	bash test/p2p/peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $ID $PROXY_APP "--p2p.persistent_peers $PERSISTENT_PEERS --p2p.pex --rpc.unsafe --consensus.double_sign_check_height $DSCH"
-	bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV fs_$ID "test/p2p/dsrr/check_peer.sh $IPV $ID $ASSERT_NODE_UP"
-
-	echo ""
-	echo "PASS"
-	echo ""
diff --git a/test/p2p/fast_sync/check_peer.sh b/test/p2p/fast_sync/check_peer.sh
deleted file mode 100644
index 798b508fa..000000000
--- a/test/p2p/fast_sync/check_peer.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#! /bin/bash
-set -eu
-set -o pipefail
-
-IPV=$1
-ID=$2
-
-###########################################
-#
-# Wait for peer to catchup to other peers
-#
-###########################################
-
-addr=$(test/p2p/address.sh $IPV $ID 26657)
-peerID=$(( $(($ID % 4)) + 1  )) # 1->2 ... 3->4 ... 4->1
-peer_addr=$(test/p2p/address.sh $IPV $peerID 26657)
-
-# get another peer's height
-h1=`curl -s $peer_addr/status | jq .result.sync_info.latest_block_height | jq fromjson`
-
-# get another peer's state
-root1=`curl -s $peer_addr/status | jq .result.sync_info.latest_app_hash`
-
-echo "Other peer is on height $h1 with state $root1"
-echo "Waiting for peer $ID to catch up"
-
-# wait for it to sync to past its previous height
-set +e
-set +o pipefail
-h2="0"
-while [[ "$h2" -lt "$(($h1+3))" ]]; do
-	sleep 1
-	h2=`curl -s $addr/status | jq .result.sync_info.latest_block_height | jq fromjson`
-	echo "... $h2"
-done
-
-# check the app hash
-root2=`curl -s $addr/status | jq .result.sync_info.latest_app_hash`
-
-if [[ "$root1" != "$root2" ]]; then
-	echo "App hash after fast sync does not match. Got $root2; expected $root1"
-	exit 1
-fi
-echo "... fast sync successful"
diff --git a/test/p2p/fast_sync/test.sh b/test/p2p/fast_sync/test.sh
deleted file mode 100644
index 79655232f..000000000
--- a/test/p2p/fast_sync/test.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-PROXY_APP=$5
-
-# run it on each of them
-for i in `seq 1 $N`; do
-	bash test/p2p/fast_sync/test_peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $i $N $PROXY_APP
-done
-
-
diff --git a/test/p2p/fast_sync/test_peer.sh b/test/p2p/fast_sync/test_peer.sh
deleted file mode 100644
index b4c34336f..000000000
--- a/test/p2p/fast_sync/test_peer.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-ID=$4
-N=$5
-PROXY_APP=$6
-
-###############################################################
-# this runs on each peer:
-# 	kill peer
-# 	bring it back online via fast sync
-# 	wait for it to sync and check the app hash
-###############################################################
-
-
-echo "Testing fastsync on node $ID"
-
-# kill peer
-set +e # circle sigh :(
-	docker rm -vf local_testnet_$ID
-	set -e
-
-	# restart peer - should have an empty blockchain
-	PERSISTENT_PEERS="$(test/p2p/address.sh $IPV 1 26656 $DOCKER_IMAGE)"
-	for j in `seq 2 $N`; do
-		PERSISTENT_PEERS="$PERSISTENT_PEERS,$(test/p2p/address.sh $IPV $j 26656 $DOCKER_IMAGE)"
-	done
-	bash test/p2p/peer.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $ID $PROXY_APP "--p2p.persistent_peers $PERSISTENT_PEERS --p2p.pex --rpc.unsafe"
-
-	# wait for peer to sync and check the app hash
-	bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV fs_$ID "test/p2p/fast_sync/check_peer.sh $IPV $ID"
-
-	echo ""
-	echo "PASS"
-	echo ""
-
diff --git a/test/p2p/kill_all/check_peers.sh b/test/p2p/kill_all/check_peers.sh
deleted file mode 100644
index 504cdeddd..000000000
--- a/test/p2p/kill_all/check_peers.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#! /bin/bash
-set -eu
-
-IPV=$1
-NUM_OF_PEERS=$2
-
-# how many attempts for each peer to catch up by height
-MAX_ATTEMPTS_TO_CATCH_UP=120
-
-echo "Waiting for nodes to come online"
-set +e
-for i in $(seq 1 "$NUM_OF_PEERS"); do
-	addr=$(test/p2p/address.sh $IPV $i 26657)
-	curl -s "$addr/status" > /dev/null
-	ERR=$?
-	while [ "$ERR" != 0 ]; do
-		sleep 1
-		curl -s "$addr/status" > /dev/null
-		ERR=$?
-	done
-	echo "... node $i is up"
-done
-set -e
-
-# get the first peer's height
-addr=$(test/p2p/address.sh $IPV 1 26657)
-h1=$(curl -s "$addr/status" | jq .result.sync_info.latest_block_height | sed -e "s/^\"\(.*\)\"$/\1/g")
-echo "1st peer is on height $h1"
-
-echo "Waiting until other peers reporting a height higher than the 1st one"
-for i in $(seq 2 "$NUM_OF_PEERS"); do
-	attempt=1
-	hi=0
-
-	while [[ $hi -le $h1 ]] ; do
-		addr=$(test/p2p/address.sh $IPV $i 26657)
-		hi=$(curl -s "$addr/status" | jq .result.sync_info.latest_block_height | sed -e "s/^\"\(.*\)\"$/\1/g")
-
-		echo "... peer $i is on height $hi"
-
-		((attempt++))
-		if [ "$attempt" -ge $MAX_ATTEMPTS_TO_CATCH_UP ] ; then
-			echo "$attempt unsuccessful attempts were made to catch up"
-			curl -s "$addr/dump_consensus_state" | jq .result
-			exit 1
-		fi
-
-		sleep 1
-	done
-done
diff --git a/test/p2p/kill_all/test.sh b/test/p2p/kill_all/test.sh
deleted file mode 100644
index 755612130..000000000
--- a/test/p2p/kill_all/test.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-NUM_OF_PEERS=$4
-NUM_OF_CRASHES=$5
-
-###############################################################
-# NUM_OF_CRASHES times:
-# 	restart all peers
-# 	wait for them to sync and check that they are making progress
-###############################################################
-
-for i in $(seq 1 "$NUM_OF_CRASHES"); do
-  echo ""
-  echo "Restarting all peers! Take $i ..."
-
-  # restart all peers
-  for j in $(seq 1 "$NUM_OF_PEERS"); do
-    docker stop "local_testnet_$j"
-    docker start "local_testnet_$j"
-  done
-
-  bash test/p2p/client.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" kill_all_$i "test/p2p/kill_all/check_peers.sh $IPV $NUM_OF_PEERS"
-done
-
-echo ""
-echo "PASS"
-echo ""
diff --git a/test/p2p/local_testnet_start.sh b/test/p2p/local_testnet_start.sh
deleted file mode 100644
index 8da6be4bb..000000000
--- a/test/p2p/local_testnet_start.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-APP_PROXY=$5
-
-set +u
-PERSISTENT_PEERS=$6
-if [[ "$PERSISTENT_PEERS" != "" ]]; then
-	echo "PersistentPeers: $PERSISTENT_PEERS"
-	PERSISTENT_PEERS="--p2p.persistent_peers $PERSISTENT_PEERS"
-fi
-set -u
-
-# create docker network
-if [[ $IPV == 6 ]]; then
-	docker network create --driver bridge --ipv6 --subnet fd80:b10c::/48 "$NETWORK_NAME"
-else
-	docker network create --driver bridge --subnet 172.57.0.0/16 "$NETWORK_NAME"
-fi
-
-for i in $(seq 1 "$N"); do
-	bash test/p2p/peer.sh "$DOCKER_IMAGE" "$NETWORK_NAME" $IPV "$i" "$APP_PROXY" "$PERSISTENT_PEERS --p2p.pex --rpc.unsafe"
-done
diff --git a/test/p2p/local_testnet_stop.sh b/test/p2p/local_testnet_stop.sh
deleted file mode 100644
index 1dace4694..000000000
--- a/test/p2p/local_testnet_stop.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /bin/bash
-set -u
-
-NETWORK_NAME=$1
-N=$2
-
-for i in $(seq 1 "$N"); do
-  docker stop "local_testnet_$i"
-  docker rm -vf "local_testnet_$i"
-done
-
-docker network rm "$NETWORK_NAME"
diff --git a/test/p2p/peer.sh b/test/p2p/peer.sh
deleted file mode 100644
index bf146ca1b..000000000
--- a/test/p2p/peer.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-ID=$4
-APP_PROXY=$5
-
-set +u
-NODE_FLAGS=$6
-set -u
-
-if [[ "$IPV" == 6 ]]; then
-	IP_SWITCH="--ip6"
-else
-	IP_SWITCH="--ip"
-fi
-
-echo "starting tendermint peer ID=$ID"
-# start tendermint container on the network
-# NOTE: $NODE_FLAGS should be unescaped (no quotes). otherwise it will be
-# treated as one flag.
-
-# test/p2p/data/mach$((ID-1)) data is generated in test/docker/Dockerfile using
-# the tendermint testnet command.
-if [[ "$ID" == "x" ]]; then # Set "x" to "1" to print to console.
-	docker run \
-		--net="$NETWORK_NAME" \
-		$IP_SWITCH=$(test/p2p/address.sh $IPV $ID) \
-		--name "local_testnet_$ID" \
-		--entrypoint tendermint \
-		-e TMHOME="/go/src/github.com/tendermint/tendermint/test/p2p/data/mach$((ID-1))" \
-		-e GOMAXPROCS=1 \
-		--log-driver=syslog \
-		--log-opt syslog-address=udp://127.0.0.1:5514 \
-		--log-opt syslog-facility=daemon \
-		--log-opt tag="{{.Name}}" \
-		"$DOCKER_IMAGE" node $NODE_FLAGS --log_level=debug --proxy_app="$APP_PROXY" &
-else
-	docker run -d \
-		--net="$NETWORK_NAME" \
-		$IP_SWITCH=$(test/p2p/address.sh $IPV $ID) \
-		--name "local_testnet_$ID" \
-		--entrypoint tendermint \
-		-e TMHOME="/go/src/github.com/tendermint/tendermint/test/p2p/data/mach$((ID-1))" \
-		-e GOMAXPROCS=1 \
-		--log-driver=syslog \
-		--log-opt syslog-address=udp://127.0.0.1:5514 \
-		--log-opt syslog-facility=daemon \
-		--log-opt tag="{{.Name}}" \
-		"$DOCKER_IMAGE" node $NODE_FLAGS --log_level=debug --proxy_app="$APP_PROXY"
-fi
diff --git a/test/p2p/persistent_peers.sh b/test/p2p/persistent_peers.sh
deleted file mode 100644
index a1e76991a..000000000
--- a/test/p2p/persistent_peers.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /bin/bash
-set -eu
-
-IPV=$1
-N=$2
-DOCKER_IMAGE=$3
-
-persistent_peers="$(test/p2p/address.sh $IPV 1 26656 $DOCKER_IMAGE)"
-for i in $(seq 2 $N); do
-	persistent_peers="$persistent_peers,$(test/p2p/address.sh $IPV $i 26656 $DOCKER_IMAGE)"
-done
-echo "$persistent_peers"
diff --git a/test/p2p/pex/check_peer.sh b/test/p2p/pex/check_peer.sh
deleted file mode 100644
index 93499d9f9..000000000
--- a/test/p2p/pex/check_peer.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#! /bin/bash
-set -u
-
-IPV=$1
-ID=$2
-N=$3
-
-addr=$(test/p2p/address.sh $IPV "$ID" 26657)
-
-echo "2. wait until peer $ID connects to other nodes using pex reactor"
-peers_count="0"
-while [[ "$peers_count" -lt "$((N-1))" ]]; do
-  sleep 1
-  peers_count=$(curl -s "$addr/net_info" | jq ".result.peers | length")
-  echo "... peers count = $peers_count, expected = $((N-1))"
-done
-
-echo "... successful"
diff --git a/test/p2p/pex/dial_peers.sh b/test/p2p/pex/dial_peers.sh
deleted file mode 100644
index 8c4d40f44..000000000
--- a/test/p2p/pex/dial_peers.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#! /bin/bash
-set -u
-
-IPV=$1
-N=$2
-PEERS=$3
-
-echo "Waiting for nodes to come online"
-for i in $(seq 1 "$N"); do
-	addr=$(test/p2p/address.sh $IPV $i 26657)
-	curl -s "$addr/status" > /dev/null
-	ERR=$?
-	while [ "$ERR" != 0 ]; do
-		sleep 1
-		curl -s "$addr/status" > /dev/null
-		ERR=$?
-	done
-	echo "... node $i is up"
-done
-
-ADDR=$(test/p2p/address.sh $IPV 1 26657)
-curl "$ADDR/dial_peers?persistent=true&peers=\\[$PEERS\\]"
diff --git a/test/p2p/pex/test.sh b/test/p2p/pex/test.sh
deleted file mode 100644
index 1e87a9fa5..000000000
--- a/test/p2p/pex/test.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-PROXY_APP=$5
-
-echo "Test reconnecting from the address book"
-bash test/p2p/pex/test_addrbook.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP"
-
-echo "Test connecting via /dial_peers"
-bash test/p2p/pex/test_dial_peers.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP"
diff --git a/test/p2p/pex/test_addrbook.sh b/test/p2p/pex/test_addrbook.sh
deleted file mode 100644
index 06fc4215f..000000000
--- a/test/p2p/pex/test_addrbook.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-PROXY_APP=$5
-
-ID=1
-
-echo "----------------------------------------------------------------------"
-echo "Testing pex creates the addrbook and uses it if persistent_peers are not provided"
-echo "(assuming peers are started with pex enabled)"
-
-CLIENT_NAME="pex_addrbook_$ID"
-
-echo "1. restart peer $ID"
-docker stop "local_testnet_$ID"
-echo "stopped local_testnet_$ID"
-# preserve addrbook.json
-docker cp "local_testnet_$ID:/go/src/github.com/tendermint/tendermint/test/p2p/data/mach0/config/addrbook.json" "/tmp/addrbook.json"
-set +e #CIRCLE
-docker rm -vf "local_testnet_$ID"
-set -e
-
-# NOTE that we do not provide persistent_peers
-bash test/p2p/peer.sh "$DOCKER_IMAGE" "$NETWORK_NAME" $IPV "$ID" "$PROXY_APP" "--p2p.pex --rpc.unsafe"
-echo "started local_testnet_$ID"
-
-# if the client runs forever, it means addrbook wasn't saved or was empty
-bash test/p2p/client.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$CLIENT_NAME" "test/p2p/pex/check_peer.sh $IPV $ID $N"
-
-# Now we know that the node is up.
-
-docker cp "/tmp/addrbook.json" "local_testnet_$ID:/go/src/github.com/tendermint/tendermint/test/p2p/data/mach0/config/addrbook.json"
-echo "with the following addrbook:"
-cat /tmp/addrbook.json
-# exec doesn't work on circle
-# docker exec "local_testnet_$ID" cat "/go/src/github.com/tendermint/tendermint/test/p2p/data/mach0/config/addrbook.json"
-echo ""
-
-echo "----------------------------------------------------------------------"
-echo "Testing other peers connect to us if we have neither persistent_peers nor the addrbook"
-echo "(assuming peers are started with pex enabled)"
-
-CLIENT_NAME="pex_no_addrbook_$ID"
-
-echo "1. restart peer $ID"
-docker stop "local_testnet_$ID"
-echo "stopped local_testnet_$ID"
-set +e #CIRCLE
-docker rm -vf "local_testnet_$ID"
-set -e
-
-# NOTE that we do not provide persistent_peers
-bash test/p2p/peer.sh "$DOCKER_IMAGE" "$NETWORK_NAME" $IPV "$ID" "$PROXY_APP" "--p2p.pex --rpc.unsafe"
-echo "started local_testnet_$ID"
-
-# if the client runs forever, it means other peers have removed us from their books (which should not happen)
-bash test/p2p/client.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$CLIENT_NAME" "test/p2p/pex/check_peer.sh $IPV $ID $N"
-
-# Now we know that the node is up.
-
-echo ""
-echo "PASS"
-echo ""
diff --git a/test/p2p/pex/test_dial_peers.sh b/test/p2p/pex/test_dial_peers.sh
deleted file mode 100644
index af76a5699..000000000
--- a/test/p2p/pex/test_dial_peers.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=$2
-IPV=$3
-N=$4
-PROXY_APP=$5
-
-ID=1
-
-echo "----------------------------------------------------------------------"
-echo "Testing full network connection using one /dial_peers call"
-echo "(assuming peers are started with pex enabled)"
-
-# stop the existing testnet and remove local network
-set +e
-bash test/p2p/local_testnet_stop.sh $NETWORK_NAME $N
-set -e
-
-# start the testnet on a local network
-# NOTE we re-use the same network for all tests
-bash test/p2p/local_testnet_start.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $N $PROXY_APP ""
-
-PERSISTENT_PEERS="\"$(test/p2p/address.sh $IPV 1 26656 $DOCKER_IMAGE)\""
-for i in $(seq 2 $N); do
-	PERSISTENT_PEERS="$PERSISTENT_PEERS,\"$(test/p2p/address.sh $IPV $i 26656 $DOCKER_IMAGE)\""
-done
-echo "$PERSISTENT_PEERS"
-
-# dial peers from one node
-CLIENT_NAME="dial_peers"
-bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $CLIENT_NAME "test/p2p/pex/dial_peers.sh $IPV $N $PERSISTENT_PEERS"
-
-# test basic connectivity and consensus
-# start client container and check the num peers and height for all nodes
-CLIENT_NAME="dial_peers_basic"
-bash test/p2p/client.sh $DOCKER_IMAGE $NETWORK_NAME $IPV $CLIENT_NAME "test/p2p/basic/test.sh $IPV $N"
diff --git a/test/p2p/test.sh b/test/p2p/test.sh
deleted file mode 100644
index 3703a6780..000000000
--- a/test/p2p/test.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#! /bin/bash
-set -eu
-
-DOCKER_IMAGE=$1
-NETWORK_NAME=local_testnet
-N=4
-PROXY_APP=persistent_kvstore
-IPV=${2:-4} # Default to IPv4
-
-if [[ "$IPV" != "4" && "$IPV" != "6" ]]; then
-    echo "IP version must be 4 or 6" >&2
-    exit 1
-fi
-
-# stop the existing testnet and remove local network
-set +e
-bash test/p2p/local_testnet_stop.sh "$NETWORK_NAME" "$N"
-set -e
-
-PERSISTENT_PEERS=$(bash test/p2p/persistent_peers.sh $IPV $N $DOCKER_IMAGE)
-
-# start the testnet on a local network
-# NOTE we re-use the same network for all tests
-bash test/p2p/local_testnet_start.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP" "$PERSISTENT_PEERS"
-
-# test basic connectivity and consensus
-# start client container and check the num peers and height for all nodes
-bash test/p2p/client.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" basic "test/p2p/basic/test.sh $IPV $N"
-
-# test atomic broadcast:
-# start client container and test sending a tx to each node
-bash test/p2p/client.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" ab "test/p2p/atomic_broadcast/test.sh $IPV $N"
-
-# test fast sync (from current state of network):
-# for each node, kill it and readd via fast sync
-bash test/p2p/fast_sync/test.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP"
-
-# test double sign risk reduction for each node
-bash test/p2p/dsrr/test.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP"
-
-# test killing all peers 3 times
-bash test/p2p/kill_all/test.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" 3
-
-# test pex
-bash test/p2p/pex/test.sh "$DOCKER_IMAGE" "$NETWORK_NAME" "$IPV" "$N" "$PROXY_APP"
diff --git a/test/persist/test_failure_indices.sh b/test/persist/test_failure_indices.sh
deleted file mode 100644
index 4d523d943..000000000
--- a/test/persist/test_failure_indices.sh
+++ /dev/null
@@ -1,124 +0,0 @@
-#! /bin/bash
-
-export PATH="$GOBIN:$PATH"
-export TMHOME=$HOME/.tendermint_persist
-
-rm -rf "$TMHOME"
-tendermint init
-
-# use a unix socket so we can remove it
-RPC_ADDR="$(pwd)/rpc.sock"
-
-TM_CMD="tendermint node --log_level=debug --rpc.laddr=unix://$RPC_ADDR" # &> tendermint_${name}.log"
-DUMMY_CMD="abci-cli kvstore --persist $TMHOME/kvstore" # &> kvstore_${name}.log"
-
-
-function start_procs(){
-    name=$1
-    indexToFail=$2
-    echo "Starting persistent kvstore and tendermint"
-    if [[ "$CIRCLECI" == true ]]; then
-        $DUMMY_CMD &
-    else
-        $DUMMY_CMD &> "kvstore_${name}.log" &
-    fi
-    PID_DUMMY=$!
-
-    # before starting tendermint, remove the rpc socket
-    rm -f $RPC_ADDR
-    if [[ "$indexToFail" == "" ]]; then
-        # run in background, dont fail
-		if [[ "$CIRCLECI" == true ]]; then
-			$TM_CMD &
-		else
-            $TM_CMD &> "tendermint_${name}.log" &
-		fi
-        PID_TENDERMINT=$!
-    else
-        # run in foreground, fail
-		if [[ "$CIRCLECI" == true ]]; then
-			FAIL_TEST_INDEX=$indexToFail $TM_CMD
-		else
-            FAIL_TEST_INDEX=$indexToFail $TM_CMD &> "tendermint_${name}.log"
-		fi
-        PID_TENDERMINT=$!
-    fi
-}
-
-function kill_procs(){
-    kill -9 "$PID_DUMMY" "$PID_TENDERMINT"
-    wait "$PID_DUMMY"
-    wait "$PID_TENDERMINT"
-}
-
-# wait for port to be available
-function wait_for_port() {
-    port=$1
-    # this will succeed while port is bound
-    nc -z 127.0.0.1 $port
-    ERR=$?
-    i=0
-    while [ "$ERR" == 0 ]; do
-        echo "... port $port is still bound. waiting ..."
-        sleep 1
-        nc -z 127.0.0.1 $port
-        ERR=$?
-        i=$((i + 1))
-        if [[ $i == 10 ]]; then
-            echo "Timed out waiting for port to be released"
-            exit 1
-        fi
-    done
-    echo "... port $port is free!"
-}
-
-
-failsStart=0
-fails=$(grep -r "fail.Fail" --include \*.go . | wc -l)
-failsEnd=$((fails-1))
-
-for failIndex in $(seq $failsStart $failsEnd); do
-    echo ""
-    echo "* Test FailIndex $failIndex"
-    # test failure at failIndex
-
-    bash $(dirname $0)/txs.sh "localhost:26657" &
-    start_procs 1 "$failIndex"
-
-    # tendermint should already have exited when it hits the fail index
-    # but kill -9 for good measure
-    kill_procs
-
-    start_procs 2
-
-    # wait for node to handshake and make a new block
-    # NOTE: --unix-socket is only available in curl v7.40+
-    curl -s --unix-socket "$RPC_ADDR" http://localhost/status > /dev/null
-    ERR=$?
-    i=0
-    while [ "$ERR" != 0 ]; do
-        sleep 1
-        curl -s --unix-socket "$RPC_ADDR" http://localhost/status > /dev/null
-        ERR=$?
-        i=$((i + 1))
-        if [[ $i == 20 ]]; then
-            echo "Timed out waiting for tendermint to start"
-            exit 1
-        fi
-    done
-
-    # wait for a new block
-    h1=$(curl -s --unix-socket "$RPC_ADDR" http://localhost/status | jq .result.sync_info.latest_block_height)
-    h2=$h1
-    while [ "$h2" == "$h1" ]; do
-        sleep 1
-        h2=$(curl -s --unix-socket "$RPC_ADDR" http://localhost/status | jq .result.sync_info.latest_block_height)
-    done
-
-    kill_procs
-
-    echo "* Passed Test for FailIndex $failIndex"
-    echo ""
-done
-
-echo "Passed Test: Persistence"
diff --git a/test/persist/test_simple.sh b/test/persist/test_simple.sh
deleted file mode 100644
index 706e04c26..000000000
--- a/test/persist/test_simple.sh
+++ /dev/null
@@ -1,70 +0,0 @@
-#! /bin/bash
-
-
-export TMHOME=$HOME/.tendermint_persist
-
-rm -rf $TMHOME
-tendermint init
-
-function start_procs(){
-    name=$1
-    echo "Starting persistent kvstore and tendermint"
-    abci-cli kvstore --persist $TMHOME/kvstore &> "kvstore_${name}.log" &
-    PID_DUMMY=$!
-    tendermint node &> tendermint_${name}.log &
-    PID_TENDERMINT=$!
-    sleep 5
-}
-
-function kill_procs(){
-    kill -9 $PID_DUMMY $PID_TENDERMINT
-}
-
-
-function send_txs(){
-    # send a bunch of txs over a few blocks
-    echo "Sending txs"
-    for i in `seq 1 5`; do
-        for j in `seq 1 100`; do
-            tx=`head -c 8 /dev/urandom | hexdump -ve '1/1 "%.2X"'`
-            curl -s 127.0.0.1:26657/broadcast_tx_async?tx=0x$tx &> /dev/null
-        done
-        sleep 1
-    done
-}
-
-
-start_procs 1
-send_txs
-kill_procs
-
-start_procs 2
-
-# wait for node to handshake and make a new block
-addr="localhost:26657"
-curl -s $addr/status > /dev/null
-ERR=$?
-i=0
-while [ "$ERR" != 0 ]; do
-    sleep 1
-    curl -s $addr/status > /dev/null
-    ERR=$?
-    i=$(($i + 1))
-    if [[ $i == 10 ]]; then
-        echo "Timed out waiting for tendermint to start"
-        exit 1
-    fi
-done
-
-# wait for a new block
-h1=`curl -s $addr/status | jq .result.sync_info.latest_block_height`
-h2=$h1
-while [ "$h2" == "$h1" ]; do
-    sleep 1
-    h2=`curl -s $addr/status | jq .result.sync_info.latest_block_height`
-done
-
-kill_procs
-sleep 2
-
-echo "Passed Test: Persistence"
diff --git a/test/persist/txs.sh b/test/persist/txs.sh
deleted file mode 100644
index 120aa8a56..000000000
--- a/test/persist/txs.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#! /bin/bash
-set -u
-
-# wait till node is up, send txs
-ADDR=$1 #="127.0.0.1:26657"
-curl -s $ADDR/status > /dev/null
-ERR=$?
-while [ "$ERR" != 0 ]; do
-	sleep 1	
-	curl -s $ADDR/status > /dev/null
-	ERR=$?
-done
-
-# send a bunch of txs over a few blocks
-echo "Node is up, sending txs"
-for i in $(seq 1 5); do
-	for _ in $(seq 1 100); do
-		tx=$(head -c 8 /dev/urandom | hexdump -ve '1/1 "%.2X"')
-		curl -s "$ADDR/broadcast_tx_async?tx=0x$tx" &> /dev/null
-	done
-	echo "sent 100"
-	sleep 1
-done
diff --git a/tests.mk b/tests.mk
index 56386d6c8..e4431d935 100644
--- a/tests.mk
+++ b/tests.mk
@@ -33,45 +33,6 @@ test_abci_cli:
 	@ bash abci/tests/test_cli/test.sh
 .PHONY: test_abci_cli
 
-test_persistence:
-	# run the persistence tests using bash
-	# requires `abci-cli` installed
-	docker run --name run_persistence -t tester bash test/persist/test_failure_indices.sh
-
-	# TODO undockerize
-	# bash test/persist/test_failure_indices.sh
-.PHONY: test_persistence
-
-test_p2p:
-	docker rm -f rsyslog || true
-	rm -rf test/logs && mkdir -p test/logs
-	docker run -d -v "$(CURDIR)/test/logs:/var/log/" -p 127.0.0.1:5514:514/udp --name rsyslog voxxit/rsyslog
-	# requires 'tester' the image from above
-	bash test/p2p/test.sh tester
-	# the `docker cp` takes a really long time; uncomment for debugging
-	#
-	# mkdir -p test/p2p/logs && docker cp rsyslog:/var/log test/p2p/logs
-.PHONY: test_p2p
-
-test_p2p_ipv6:
-	# IPv6 tests require Docker daemon with IPv6 enabled, e.g. in daemon.json:
-	#
-	# {
-	#	"ipv6": true,
-	#   "fixed-cidr-v6": "2001:db8:1::/64"
-	# }
-	#
-	# Docker for Mac can set this via Preferences -> Docker Engine.
-	docker rm -f rsyslog || true
-	rm -rf test/logs && mkdir -p test/logs
-	docker run -d -v "$(CURDIR)/test/logs:/var/log/" -p 127.0.0.1:5514:514/udp --name rsyslog voxxit/rsyslog
-	# requires 'tester' the image from above
-	bash test/p2p/test.sh tester 6
-	# the `docker cp` takes a really long time; uncomment for debugging
-	#
-	# mkdir -p test/p2p/logs && docker cp rsyslog:/var/log test/p2p/logs
-.PHONY: test_p2p_ipv6
-
 test_integrations:
 	make build_docker_test_image
 	make tools
@@ -81,10 +42,6 @@ test_integrations:
 	make test_abci_apps
 	make test_abci_cli
 	make test_libs
-	make test_persistence
-	make test_p2p
-	# Disabled by default since it requires Docker daemon with IPv6 enabled
-	#make test_p2p_ipv6
 .PHONY: test_integrations
 
 test_release: