You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

154 lines
4.2 KiB

rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
lint: Enable Golint (#4212) * Fix many golint errors * Fix golint errors in the 'lite' package * Don't export Pool.store * Fix typo * Revert unwanted changes * Fix errors in counter package * Fix linter errors in kvstore package * Fix linter error in example package * Fix error in tests package * Fix linter errors in v2 package * Fix linter errors in consensus package * Fix linter errors in evidence package * Fix linter error in fail package * Fix linter errors in query package * Fix linter errors in core package * Fix linter errors in node package * Fix linter errors in mempool package * Fix linter error in conn package * Fix linter errors in pex package * Rename PEXReactor export to Reactor * Fix linter errors in trust package * Fix linter errors in upnp package * Fix linter errors in p2p package * Fix linter errors in proxy package * Fix linter errors in mock_test package * Fix linter error in client_test package * Fix linter errors in coretypes package * Fix linter errors in coregrpc package * Fix linter errors in rpcserver package * Fix linter errors in rpctypes package * Fix linter errors in rpctest package * Fix linter error in json2wal script * Fix linter error in wal2json script * Fix linter errors in kv package * Fix linter error in state package * Fix linter error in grpc_client * Fix linter errors in types package * Fix linter error in version package * Fix remaining errors * Address review comments * Fix broken tests * Reconcile package coregrpc * Fix golangci bot error * Fix new golint errors * Fix broken reference * Enable golint linter * minor changes to bring golint into line * fix failing test * fix pex reactor naming * address PR comments
5 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
abci: Synchronize FinalizeBlock with the updated specification (#7983) This change set implements the most recent version of `FinalizeBlock`. # What does this change actually contain? * This change set is rather large but fear not! The majority of the files touched and changes are renaming `ResponseDeliverTx` to `ExecTxResult`. This should be a pretty inoffensive change since they're effectively the same type but with a different name. * The `execBlockOnProxyApp` was totally removed since it served as just a wrapper around the logic that is now mostly encapsulated within `FinalizeBlock` * The `updateState` helper function has been made a public method on `State`. It was being exposed as a shim through the testing infrastructure, so this seemed innocuous. * Tests already existed to ensure that the application received the `ByzantineValidators` and the `ValidatorUpdates`, but one was fixed up to ensure that `LastCommitInfo` was being sent across. * Tests were removed from the `psql` indexer that seemed to search for an event in the indexer that was not being created. # Questions for reviewers * We store this [ABCIResponses](https://github.com/tendermint/tendermint/blob/5721a13ab1f4479f9807f449f0bf5c536b9a05f2/proto/tendermint/state/types.pb.go#L37) type in the data base as the block results. This type has changed since v0.35 to contain the `FinalizeBlock` response. I'm wondering if we need to do any shimming to keep the old data retrieveable? * Similarly, this change is exposed via the RPC through [ResultBlockResults](https://github.com/tendermint/tendermint/blob/5721a13ab1f4479f9807f449f0bf5c536b9a05f2/rpc/coretypes/responses.go#L69) changing. Should we somehow shim or notify for this change? closes: #7658
3 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
lint: Enable Golint (#4212) * Fix many golint errors * Fix golint errors in the 'lite' package * Don't export Pool.store * Fix typo * Revert unwanted changes * Fix errors in counter package * Fix linter errors in kvstore package * Fix linter error in example package * Fix error in tests package * Fix linter errors in v2 package * Fix linter errors in consensus package * Fix linter errors in evidence package * Fix linter error in fail package * Fix linter errors in query package * Fix linter errors in core package * Fix linter errors in node package * Fix linter errors in mempool package * Fix linter error in conn package * Fix linter errors in pex package * Rename PEXReactor export to Reactor * Fix linter errors in trust package * Fix linter errors in upnp package * Fix linter errors in p2p package * Fix linter errors in proxy package * Fix linter errors in mock_test package * Fix linter error in client_test package * Fix linter errors in coretypes package * Fix linter errors in coregrpc package * Fix linter errors in rpcserver package * Fix linter errors in rpctypes package * Fix linter errors in rpctest package * Fix linter error in json2wal script * Fix linter error in wal2json script * Fix linter errors in kv package * Fix linter error in state package * Fix linter error in grpc_client * Fix linter errors in types package * Fix linter error in version package * Fix remaining errors * Address review comments * Fix broken tests * Reconcile package coregrpc * Fix golangci bot error * Fix new golint errors * Fix broken reference * Enable golint linter * minor changes to bring golint into line * fix failing test * fix pex reactor naming * address PR comments
5 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
  1. package client_test
  2. import (
  3. "bytes"
  4. "context"
  5. "log"
  6. "net/http"
  7. "testing"
  8. "time"
  9. "github.com/stretchr/testify/assert"
  10. "github.com/stretchr/testify/require"
  11. "github.com/tendermint/tendermint/abci/example/kvstore"
  12. rpchttp "github.com/tendermint/tendermint/rpc/client/http"
  13. "github.com/tendermint/tendermint/rpc/coretypes"
  14. rpctest "github.com/tendermint/tendermint/rpc/test"
  15. )
  16. func TestHTTPSimple(t *testing.T) {
  17. ctx, cancel := context.WithCancel(context.Background())
  18. defer cancel()
  19. // Start a tendermint node (and kvstore) in the background to test against
  20. app := kvstore.NewApplication()
  21. conf, err := rpctest.CreateConfig(t, "ExampleHTTP_simple")
  22. require.NoError(t, err)
  23. _, closer, err := rpctest.StartTendermint(ctx, conf, app, rpctest.SuppressStdout)
  24. if err != nil {
  25. log.Fatal(err) //nolint:gocritic
  26. }
  27. defer func() { _ = closer(ctx) }()
  28. // Create our RPC client
  29. rpcAddr := conf.RPC.ListenAddress
  30. c, err := rpchttp.New(rpcAddr)
  31. require.NoError(t, err)
  32. // Create a transaction
  33. k := []byte("name")
  34. v := []byte("satoshi")
  35. tx := append(k, append([]byte("="), v...)...)
  36. // Broadcast the transaction and wait for it to commit (rather use
  37. // c.BroadcastTxSync though in production).
  38. bres, err := c.BroadcastTxCommit(ctx, tx)
  39. require.NoError(t, err)
  40. if err != nil {
  41. log.Fatal(err)
  42. }
  43. if bres.CheckTx.IsErr() || bres.TxResult.IsErr() {
  44. log.Fatal("BroadcastTxCommit transaction failed")
  45. }
  46. // Now try to fetch the value for the key
  47. qres, err := c.ABCIQuery(ctx, "/key", k)
  48. require.NoError(t, err)
  49. require.False(t, qres.Response.IsErr(), "ABCIQuery failed")
  50. require.True(t, bytes.Equal(qres.Response.Key, k),
  51. "returned key does not match queried key")
  52. require.True(t, bytes.Equal(qres.Response.Value, v),
  53. "returned value does not match sent value [%s]", string(v))
  54. assert.Equal(t, "name=satoshi", string(tx), "sent tx")
  55. assert.Equal(t, "name", string(qres.Response.Key), "queried for")
  56. assert.Equal(t, "satoshi", string(qres.Response.Value), "got value")
  57. }
  58. func TestHTTPBatching(t *testing.T) {
  59. ctx, cancel := context.WithCancel(context.Background())
  60. defer cancel()
  61. // Start a tendermint node (and kvstore) in the background to test against
  62. app := kvstore.NewApplication()
  63. conf, err := rpctest.CreateConfig(t, "ExampleHTTP_batching")
  64. require.NoError(t, err)
  65. _, closer, err := rpctest.StartTendermint(ctx, conf, app, rpctest.SuppressStdout)
  66. if err != nil {
  67. log.Fatal(err) //nolint:gocritic
  68. }
  69. defer func() { _ = closer(ctx) }()
  70. rpcAddr := conf.RPC.ListenAddress
  71. c, err := rpchttp.NewWithClient(rpcAddr, http.DefaultClient)
  72. require.NoError(t, err)
  73. // Create our two transactions
  74. k1 := []byte("firstName")
  75. v1 := []byte("satoshi")
  76. tx1 := append(k1, append([]byte("="), v1...)...)
  77. k2 := []byte("lastName")
  78. v2 := []byte("nakamoto")
  79. tx2 := append(k2, append([]byte("="), v2...)...)
  80. txs := [][]byte{tx1, tx2}
  81. // Create a new batch
  82. batch := c.NewBatch()
  83. // Queue up our transactions
  84. for _, tx := range txs {
  85. // Broadcast the transaction and wait for it to commit (rather use
  86. // c.BroadcastTxSync though in production).
  87. _, err := batch.BroadcastTxSync(ctx, tx)
  88. require.NoError(t, err)
  89. }
  90. // Send the batch of 2 transactions
  91. _, err = batch.Send(ctx)
  92. require.NoError(t, err)
  93. // wait for the transaction to land, we could poll more for
  94. // the transactions to land definitively.
  95. require.Eventually(t,
  96. func() bool {
  97. // Now let's query for the original results as a batch
  98. exists := 0
  99. for _, key := range [][]byte{k1, k2} {
  100. _, err := batch.ABCIQuery(ctx, "/key", key)
  101. if err == nil {
  102. exists++
  103. }
  104. }
  105. return exists == 2
  106. },
  107. 10*time.Second,
  108. time.Second,
  109. )
  110. // Send the 2 queries and keep the results
  111. results, err := batch.Send(ctx)
  112. require.NoError(t, err)
  113. require.Len(t, results, 2)
  114. // Each result in the returned list is the deserialized result of each
  115. // respective ABCIQuery response
  116. for _, result := range results {
  117. qr, ok := result.(*coretypes.ResultABCIQuery)
  118. require.True(t, ok, "invalid result type from ABCIQuery request")
  119. switch string(qr.Response.Key) {
  120. case "firstName":
  121. require.Equal(t, "satoshi", string(qr.Response.Value))
  122. case "lastName":
  123. require.Equal(t, "nakamoto", string(qr.Response.Value))
  124. default:
  125. t.Fatalf("encountered unknown key %q", string(qr.Response.Key))
  126. }
  127. }
  128. }