crypto: Use a different library for ed25519/sr25519 (#6526)
At Oasis we have spend some time writing a new Ed25519/X25519/sr25519 implementation called curve25519-voi. This PR switches the import from ed25519consensus/go-schnorrkel, which should lead to performance gains on most systems.
Summary of changes:
* curve25519-voi is now used for Ed25519 operations, following the existing ZIP-215 semantics.
* curve25519-voi's public key cache is enabled (hardcoded size of 4096 entries, should be tuned, see the code comment) to accelerate repeated Ed25519 verification with the same public key(s).
* (BREAKING) curve25519-voi is now used for sr25519 operations. This is a breaking change as the current sr25519 support does something decidedly non-standard when going from a MiniSecretKey to a SecretKey and or PublicKey (The expansion routine is called twice). While I believe the new behavior (that expands once and only once) to be more "correct", this changes the semantics as implemented.
* curve25519-voi is now used for merlin since the included STROBE implementation produces much less garbage on the heap.
Side issues fixed:
* The version of go-schnorrkel that is currently imported by tendermint has a badly broken batch verification implementation. Upstream has fixed the issue after I reported it, so the version should be bumped in the interim.
Open design questions/issues:
* As noted, the public key cache size should be tuned. It is currently backed by a trivial thread-safe LRU cache, which is not scan-resistant, but replacing it with something better is a matter of implementing an interface.
* As far as I can tell, the only reason why serial verification on batch failure is necessary is to provide more detailed error messages (that are only used in some unit tests). If you trust the batch verification to be consistent with serial verification then the fallback can be eliminated entirely (the BatchVerifier provided by the new library supports an option that omits the fallback if this is chosen as the way forward).
* curve25519-voi's sr25519 support could use more optimization and more eyes on the code. The algorithm unfortunately is woefully under-specified, and the implementation was done primarily because I got really sad when I actually looked at go-schnorrkel, and we do not use the algorithm at this time. 3 years ago crypto: Use a different library for ed25519/sr25519 (#6526)
At Oasis we have spend some time writing a new Ed25519/X25519/sr25519 implementation called curve25519-voi. This PR switches the import from ed25519consensus/go-schnorrkel, which should lead to performance gains on most systems.
Summary of changes:
* curve25519-voi is now used for Ed25519 operations, following the existing ZIP-215 semantics.
* curve25519-voi's public key cache is enabled (hardcoded size of 4096 entries, should be tuned, see the code comment) to accelerate repeated Ed25519 verification with the same public key(s).
* (BREAKING) curve25519-voi is now used for sr25519 operations. This is a breaking change as the current sr25519 support does something decidedly non-standard when going from a MiniSecretKey to a SecretKey and or PublicKey (The expansion routine is called twice). While I believe the new behavior (that expands once and only once) to be more "correct", this changes the semantics as implemented.
* curve25519-voi is now used for merlin since the included STROBE implementation produces much less garbage on the heap.
Side issues fixed:
* The version of go-schnorrkel that is currently imported by tendermint has a badly broken batch verification implementation. Upstream has fixed the issue after I reported it, so the version should be bumped in the interim.
Open design questions/issues:
* As noted, the public key cache size should be tuned. It is currently backed by a trivial thread-safe LRU cache, which is not scan-resistant, but replacing it with something better is a matter of implementing an interface.
* As far as I can tell, the only reason why serial verification on batch failure is necessary is to provide more detailed error messages (that are only used in some unit tests). If you trust the batch verification to be consistent with serial verification then the fallback can be eliminated entirely (the BatchVerifier provided by the new library supports an option that omits the fallback if this is chosen as the way forward).
* curve25519-voi's sr25519 support could use more optimization and more eyes on the code. The algorithm unfortunately is woefully under-specified, and the implementation was done primarily because I got really sad when I actually looked at go-schnorrkel, and we do not use the algorithm at this time. 3 years ago crypto: Use a different library for ed25519/sr25519 (#6526)
At Oasis we have spend some time writing a new Ed25519/X25519/sr25519 implementation called curve25519-voi. This PR switches the import from ed25519consensus/go-schnorrkel, which should lead to performance gains on most systems.
Summary of changes:
* curve25519-voi is now used for Ed25519 operations, following the existing ZIP-215 semantics.
* curve25519-voi's public key cache is enabled (hardcoded size of 4096 entries, should be tuned, see the code comment) to accelerate repeated Ed25519 verification with the same public key(s).
* (BREAKING) curve25519-voi is now used for sr25519 operations. This is a breaking change as the current sr25519 support does something decidedly non-standard when going from a MiniSecretKey to a SecretKey and or PublicKey (The expansion routine is called twice). While I believe the new behavior (that expands once and only once) to be more "correct", this changes the semantics as implemented.
* curve25519-voi is now used for merlin since the included STROBE implementation produces much less garbage on the heap.
Side issues fixed:
* The version of go-schnorrkel that is currently imported by tendermint has a badly broken batch verification implementation. Upstream has fixed the issue after I reported it, so the version should be bumped in the interim.
Open design questions/issues:
* As noted, the public key cache size should be tuned. It is currently backed by a trivial thread-safe LRU cache, which is not scan-resistant, but replacing it with something better is a matter of implementing an interface.
* As far as I can tell, the only reason why serial verification on batch failure is necessary is to provide more detailed error messages (that are only used in some unit tests). If you trust the batch verification to be consistent with serial verification then the fallback can be eliminated entirely (the BatchVerifier provided by the new library supports an option that omits the fallback if this is chosen as the way forward).
* curve25519-voi's sr25519 support could use more optimization and more eyes on the code. The algorithm unfortunately is woefully under-specified, and the implementation was done primarily because I got really sad when I actually looked at go-schnorrkel, and we do not use the algorithm at this time. 3 years ago |
|
- package privval
-
- import (
- "bytes"
- "crypto/cipher"
- crand "crypto/rand"
- "crypto/sha256"
- "encoding/binary"
- "errors"
- "fmt"
- "io"
- "math"
- "net"
- "time"
-
- gogotypes "github.com/gogo/protobuf/types"
- pool "github.com/libp2p/go-buffer-pool"
- "github.com/oasisprotocol/curve25519-voi/primitives/merlin"
- "golang.org/x/crypto/chacha20poly1305"
- "golang.org/x/crypto/curve25519"
- "golang.org/x/crypto/hkdf"
- "golang.org/x/crypto/nacl/box"
-
- "github.com/tendermint/tendermint/crypto"
- "github.com/tendermint/tendermint/crypto/ed25519"
- cryptoenc "github.com/tendermint/tendermint/crypto/encoding"
- "github.com/tendermint/tendermint/internal/libs/protoio"
- tmsync "github.com/tendermint/tendermint/internal/libs/sync"
- "github.com/tendermint/tendermint/libs/async"
- tmprivval "github.com/tendermint/tendermint/proto/tendermint/privval"
- )
-
- // This code has been duplicated from p2p/conn prior to the P2P refactor.
- // It is left here temporarily until we migrate privval to gRPC.
- // https://github.com/tendermint/tendermint/issues/4698
-
- // 4 + 1024 == 1028 total frame size
- const (
- dataLenSize = 4
- dataMaxSize = 1024
- totalFrameSize = dataMaxSize + dataLenSize
- aeadSizeOverhead = 16 // overhead of poly 1305 authentication tag
- aeadKeySize = chacha20poly1305.KeySize
- aeadNonceSize = chacha20poly1305.NonceSize
-
- labelEphemeralLowerPublicKey = "EPHEMERAL_LOWER_PUBLIC_KEY"
- labelEphemeralUpperPublicKey = "EPHEMERAL_UPPER_PUBLIC_KEY"
- labelDHSecret = "DH_SECRET"
- labelSecretConnectionMac = "SECRET_CONNECTION_MAC"
- )
-
- var (
- ErrSmallOrderRemotePubKey = errors.New("detected low order point from remote peer")
-
- secretConnKeyAndChallengeGen = []byte("TENDERMINT_SECRET_CONNECTION_KEY_AND_CHALLENGE_GEN")
- )
-
- // SecretConnection implements net.Conn.
- // It is an implementation of the STS protocol.
- // See https://github.com/tendermint/tendermint/blob/0.1/docs/sts-final.pdf for
- // details on the protocol.
- //
- // Consumers of the SecretConnection are responsible for authenticating
- // the remote peer's pubkey against known information, like a nodeID.
- // Otherwise they are vulnerable to MITM.
- // (TODO(ismail): see also https://github.com/tendermint/tendermint/issues/3010)
- type SecretConnection struct {
-
- // immutable
- recvAead cipher.AEAD
- sendAead cipher.AEAD
-
- remPubKey crypto.PubKey
- conn io.ReadWriteCloser
-
- // net.Conn must be thread safe:
- // https://golang.org/pkg/net/#Conn.
- // Since we have internal mutable state,
- // we need mtxs. But recv and send states
- // are independent, so we can use two mtxs.
- // All .Read are covered by recvMtx,
- // all .Write are covered by sendMtx.
- recvMtx tmsync.Mutex
- recvBuffer []byte
- recvNonce *[aeadNonceSize]byte
-
- sendMtx tmsync.Mutex
- sendNonce *[aeadNonceSize]byte
- }
-
- // MakeSecretConnection performs handshake and returns a new authenticated
- // SecretConnection.
- // Returns nil if there is an error in handshake.
- // Caller should call conn.Close()
- // See docs/sts-final.pdf for more information.
- func MakeSecretConnection(conn io.ReadWriteCloser, locPrivKey crypto.PrivKey) (*SecretConnection, error) {
- var (
- locPubKey = locPrivKey.PubKey()
- )
-
- // Generate ephemeral keys for perfect forward secrecy.
- locEphPub, locEphPriv := genEphKeys()
-
- // Write local ephemeral pubkey and receive one too.
- // NOTE: every 32-byte string is accepted as a Curve25519 public key (see
- // DJB's Curve25519 paper: http://cr.yp.to/ecdh/curve25519-20060209.pdf)
- remEphPub, err := shareEphPubKey(conn, locEphPub)
- if err != nil {
- return nil, err
- }
-
- // Sort by lexical order.
- loEphPub, hiEphPub := sort32(locEphPub, remEphPub)
-
- transcript := merlin.NewTranscript("TENDERMINT_SECRET_CONNECTION_TRANSCRIPT_HASH")
-
- transcript.AppendMessage(labelEphemeralLowerPublicKey, loEphPub[:])
- transcript.AppendMessage(labelEphemeralUpperPublicKey, hiEphPub[:])
-
- // Check if the local ephemeral public key was the least, lexicographically
- // sorted.
- locIsLeast := bytes.Equal(locEphPub[:], loEphPub[:])
-
- // Compute common diffie hellman secret using X25519.
- dhSecret, err := computeDHSecret(remEphPub, locEphPriv)
- if err != nil {
- return nil, err
- }
-
- transcript.AppendMessage(labelDHSecret, dhSecret[:])
-
- // Generate the secret used for receiving, sending, challenge via HKDF-SHA2
- // on the transcript state (which itself also uses HKDF-SHA2 to derive a key
- // from the dhSecret).
- recvSecret, sendSecret := deriveSecrets(dhSecret, locIsLeast)
-
- const challengeSize = 32
- var challenge [challengeSize]byte
- transcript.ExtractBytes(challenge[:], labelSecretConnectionMac)
-
- sendAead, err := chacha20poly1305.New(sendSecret[:])
- if err != nil {
- return nil, errors.New("invalid send SecretConnection Key")
- }
- recvAead, err := chacha20poly1305.New(recvSecret[:])
- if err != nil {
- return nil, errors.New("invalid receive SecretConnection Key")
- }
-
- sc := &SecretConnection{
- conn: conn,
- recvBuffer: nil,
- recvNonce: new([aeadNonceSize]byte),
- sendNonce: new([aeadNonceSize]byte),
- recvAead: recvAead,
- sendAead: sendAead,
- }
-
- // Sign the challenge bytes for authentication.
- locSignature, err := signChallenge(&challenge, locPrivKey)
- if err != nil {
- return nil, err
- }
-
- // Share (in secret) each other's pubkey & challenge signature
- authSigMsg, err := shareAuthSignature(sc, locPubKey, locSignature)
- if err != nil {
- return nil, err
- }
-
- remPubKey, remSignature := authSigMsg.Key, authSigMsg.Sig
- if _, ok := remPubKey.(ed25519.PubKey); !ok {
- return nil, fmt.Errorf("expected ed25519 pubkey, got %T", remPubKey)
- }
- if !remPubKey.VerifySignature(challenge[:], remSignature) {
- return nil, errors.New("challenge verification failed")
- }
-
- // We've authorized.
- sc.remPubKey = remPubKey
- return sc, nil
- }
-
- // RemotePubKey returns authenticated remote pubkey
- func (sc *SecretConnection) RemotePubKey() crypto.PubKey {
- return sc.remPubKey
- }
-
- // Writes encrypted frames of `totalFrameSize + aeadSizeOverhead`.
- // CONTRACT: data smaller than dataMaxSize is written atomically.
- func (sc *SecretConnection) Write(data []byte) (n int, err error) {
- sc.sendMtx.Lock()
- defer sc.sendMtx.Unlock()
-
- for 0 < len(data) {
- if err := func() error {
- var sealedFrame = pool.Get(aeadSizeOverhead + totalFrameSize)
- var frame = pool.Get(totalFrameSize)
- defer func() {
- pool.Put(sealedFrame)
- pool.Put(frame)
- }()
- var chunk []byte
- if dataMaxSize < len(data) {
- chunk = data[:dataMaxSize]
- data = data[dataMaxSize:]
- } else {
- chunk = data
- data = nil
- }
- chunkLength := len(chunk)
- binary.LittleEndian.PutUint32(frame, uint32(chunkLength))
- copy(frame[dataLenSize:], chunk)
-
- // encrypt the frame
- sc.sendAead.Seal(sealedFrame[:0], sc.sendNonce[:], frame, nil)
- incrNonce(sc.sendNonce)
- // end encryption
-
- _, err = sc.conn.Write(sealedFrame)
- if err != nil {
- return err
- }
- n += len(chunk)
- return nil
- }(); err != nil {
- return n, err
- }
- }
- return n, err
- }
-
- // CONTRACT: data smaller than dataMaxSize is read atomically.
- func (sc *SecretConnection) Read(data []byte) (n int, err error) {
- sc.recvMtx.Lock()
- defer sc.recvMtx.Unlock()
-
- // read off and update the recvBuffer, if non-empty
- if 0 < len(sc.recvBuffer) {
- n = copy(data, sc.recvBuffer)
- sc.recvBuffer = sc.recvBuffer[n:]
- return
- }
-
- // read off the conn
- var sealedFrame = pool.Get(aeadSizeOverhead + totalFrameSize)
- defer pool.Put(sealedFrame)
- _, err = io.ReadFull(sc.conn, sealedFrame)
- if err != nil {
- return
- }
-
- // decrypt the frame.
- // reads and updates the sc.recvNonce
- var frame = pool.Get(totalFrameSize)
- defer pool.Put(frame)
- _, err = sc.recvAead.Open(frame[:0], sc.recvNonce[:], sealedFrame, nil)
- if err != nil {
- return n, fmt.Errorf("failed to decrypt SecretConnection: %w", err)
- }
- incrNonce(sc.recvNonce)
- // end decryption
-
- // copy checkLength worth into data,
- // set recvBuffer to the rest.
- var chunkLength = binary.LittleEndian.Uint32(frame) // read the first four bytes
- if chunkLength > dataMaxSize {
- return 0, errors.New("chunkLength is greater than dataMaxSize")
- }
- var chunk = frame[dataLenSize : dataLenSize+chunkLength]
- n = copy(data, chunk)
- if n < len(chunk) {
- sc.recvBuffer = make([]byte, len(chunk)-n)
- copy(sc.recvBuffer, chunk[n:])
- }
- return n, err
- }
-
- // Implements net.Conn
- func (sc *SecretConnection) Close() error { return sc.conn.Close() }
- func (sc *SecretConnection) LocalAddr() net.Addr { return sc.conn.(net.Conn).LocalAddr() }
- func (sc *SecretConnection) RemoteAddr() net.Addr { return sc.conn.(net.Conn).RemoteAddr() }
- func (sc *SecretConnection) SetDeadline(t time.Time) error { return sc.conn.(net.Conn).SetDeadline(t) }
- func (sc *SecretConnection) SetReadDeadline(t time.Time) error {
- return sc.conn.(net.Conn).SetReadDeadline(t)
- }
- func (sc *SecretConnection) SetWriteDeadline(t time.Time) error {
- return sc.conn.(net.Conn).SetWriteDeadline(t)
- }
-
- func genEphKeys() (ephPub, ephPriv *[32]byte) {
- var err error
- // TODO: Probably not a problem but ask Tony: different from the rust implementation (uses x25519-dalek),
- // we do not "clamp" the private key scalar:
- // see: https://github.com/dalek-cryptography/x25519-dalek/blob/34676d336049df2bba763cc076a75e47ae1f170f/src/x25519.rs#L56-L74
- ephPub, ephPriv, err = box.GenerateKey(crand.Reader)
- if err != nil {
- panic("Could not generate ephemeral key-pair")
- }
- return
- }
-
- func shareEphPubKey(conn io.ReadWriter, locEphPub *[32]byte) (remEphPub *[32]byte, err error) {
-
- // Send our pubkey and receive theirs in tandem.
- var trs, _ = async.Parallel(
- func(_ int) (val interface{}, abort bool, err error) {
- lc := *locEphPub
- _, err = protoio.NewDelimitedWriter(conn).WriteMsg(&gogotypes.BytesValue{Value: lc[:]})
- if err != nil {
- return nil, true, err // abort
- }
- return nil, false, nil
- },
- func(_ int) (val interface{}, abort bool, err error) {
- var bytes gogotypes.BytesValue
- _, err = protoio.NewDelimitedReader(conn, 1024*1024).ReadMsg(&bytes)
- if err != nil {
- return nil, true, err // abort
- }
-
- var _remEphPub [32]byte
- copy(_remEphPub[:], bytes.Value)
- return _remEphPub, false, nil
- },
- )
-
- // If error:
- if trs.FirstError() != nil {
- err = trs.FirstError()
- return
- }
-
- // Otherwise:
- var _remEphPub = trs.FirstValue().([32]byte)
- return &_remEphPub, nil
- }
-
- func deriveSecrets(
- dhSecret *[32]byte,
- locIsLeast bool,
- ) (recvSecret, sendSecret *[aeadKeySize]byte) {
- hash := sha256.New
- hkdf := hkdf.New(hash, dhSecret[:], nil, secretConnKeyAndChallengeGen)
- // get enough data for 2 aead keys, and a 32 byte challenge
- res := new([2*aeadKeySize + 32]byte)
- _, err := io.ReadFull(hkdf, res[:])
- if err != nil {
- panic(err)
- }
-
- recvSecret = new([aeadKeySize]byte)
- sendSecret = new([aeadKeySize]byte)
-
- // bytes 0 through aeadKeySize - 1 are one aead key.
- // bytes aeadKeySize through 2*aeadKeySize -1 are another aead key.
- // which key corresponds to sending and receiving key depends on whether
- // the local key is less than the remote key.
- if locIsLeast {
- copy(recvSecret[:], res[0:aeadKeySize])
- copy(sendSecret[:], res[aeadKeySize:aeadKeySize*2])
- } else {
- copy(sendSecret[:], res[0:aeadKeySize])
- copy(recvSecret[:], res[aeadKeySize:aeadKeySize*2])
- }
-
- return
- }
-
- // computeDHSecret computes a Diffie-Hellman shared secret key
- // from our own local private key and the other's public key.
- func computeDHSecret(remPubKey, locPrivKey *[32]byte) (*[32]byte, error) {
- shrKey, err := curve25519.X25519(locPrivKey[:], remPubKey[:])
- if err != nil {
- return nil, err
- }
- var shrKeyArray [32]byte
- copy(shrKeyArray[:], shrKey)
- return &shrKeyArray, nil
- }
-
- func sort32(foo, bar *[32]byte) (lo, hi *[32]byte) {
- if bytes.Compare(foo[:], bar[:]) < 0 {
- lo = foo
- hi = bar
- } else {
- lo = bar
- hi = foo
- }
- return
- }
-
- func signChallenge(challenge *[32]byte, locPrivKey crypto.PrivKey) ([]byte, error) {
- signature, err := locPrivKey.Sign(challenge[:])
- if err != nil {
- return nil, err
- }
- return signature, nil
- }
-
- type authSigMessage struct {
- Key crypto.PubKey
- Sig []byte
- }
-
- func shareAuthSignature(sc io.ReadWriter, pubKey crypto.PubKey, signature []byte) (recvMsg authSigMessage, err error) {
-
- // Send our info and receive theirs in tandem.
- var trs, _ = async.Parallel(
- func(_ int) (val interface{}, abort bool, err error) {
- pbpk, err := cryptoenc.PubKeyToProto(pubKey)
- if err != nil {
- return nil, true, err
- }
- _, err = protoio.NewDelimitedWriter(sc).WriteMsg(&tmprivval.AuthSigMessage{PubKey: pbpk, Sig: signature})
- if err != nil {
- return nil, true, err // abort
- }
- return nil, false, nil
- },
- func(_ int) (val interface{}, abort bool, err error) {
- var pba tmprivval.AuthSigMessage
- _, err = protoio.NewDelimitedReader(sc, 1024*1024).ReadMsg(&pba)
- if err != nil {
- return nil, true, err // abort
- }
-
- pk, err := cryptoenc.PubKeyFromProto(pba.PubKey)
- if err != nil {
- return nil, true, err // abort
- }
-
- _recvMsg := authSigMessage{
- Key: pk,
- Sig: pba.Sig,
- }
- return _recvMsg, false, nil
- },
- )
-
- // If error:
- if trs.FirstError() != nil {
- err = trs.FirstError()
- return
- }
-
- var _recvMsg = trs.FirstValue().(authSigMessage)
- return _recvMsg, nil
- }
-
- //--------------------------------------------------------------------------------
-
- // Increment nonce little-endian by 1 with wraparound.
- // Due to chacha20poly1305 expecting a 12 byte nonce we do not use the first four
- // bytes. We only increment a 64 bit unsigned int in the remaining 8 bytes
- // (little-endian in nonce[4:]).
- func incrNonce(nonce *[aeadNonceSize]byte) {
- counter := binary.LittleEndian.Uint64(nonce[4:])
- if counter == math.MaxUint64 {
- // Terminates the session and makes sure the nonce would not re-used.
- // See https://github.com/tendermint/tendermint/issues/3531
- panic("can't increase nonce without overflow")
- }
- counter++
- binary.LittleEndian.PutUint64(nonce[4:], counter)
- }
|