You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

152 lines
4.1 KiB

new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
7 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
7 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
7 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
7 years ago
limit number of /subscribe clients and queries per client (#3269) * limit number of /subscribe clients and queries per client Add the following config variables (under [rpc] section): * max_subscription_clients * max_subscriptions_per_client * timeout_broadcast_tx_commit Fixes #2826 new HTTPClient interface for subscriptions finalize HTTPClient events interface remove EventSubscriber fix data race ``` WARNING: DATA RACE Read at 0x00c000a36060 by goroutine 129: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0 Previous write at 0x00c000a36060 by goroutine 132: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 129 (running) created at: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 132 (running) created at: testing.(*T).Run() /usr/local/go/src/testing/testing.go:878 +0x659 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 ================== ``` lite client works (tested manually) godoc comments httpclient: do not close the out channel use TimeoutBroadcastTxCommit no timeout for unsubscribe but 1s Local (5s HTTP) timeout for resubscribe format code change Subscribe#out cap to 1 and replace config vars with RPCConfig TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout rpc: Context as first parameter to all functions reformat code fixes after my own review fixes after Ethan's review add test stubs fix config.toml * fixes after manual testing - rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes Tendermint resources (pubsub) - rpc: better error in Subscribe and BroadcastTxCommit - HTTPClient: do not resubscribe if err = ErrAlreadySubscribed * fixes after Ismail's review * Update rpc/grpc/grpc_test.go Co-Authored-By: melekes <anton.kalyaev@gmail.com>
6 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
7 years ago
7 years ago
  1. package client
  2. import (
  3. "context"
  4. "errors"
  5. "fmt"
  6. "sync"
  7. "time"
  8. "github.com/tendermint/tendermint/libs/log"
  9. "github.com/tendermint/tendermint/types"
  10. )
  11. // Waiter is informed of current height, decided whether to quit early
  12. type Waiter func(delta int64) (abort error)
  13. // DefaultWaitStrategy is the standard backoff algorithm,
  14. // but you can plug in another one
  15. func DefaultWaitStrategy(delta int64) (abort error) {
  16. if delta > 10 {
  17. return fmt.Errorf("waiting for %d blocks... aborting", delta)
  18. } else if delta > 0 {
  19. // estimate of wait time....
  20. // wait half a second for the next block (in progress)
  21. // plus one second for every full block
  22. delay := time.Duration(delta-1)*time.Second + 500*time.Millisecond
  23. time.Sleep(delay)
  24. }
  25. return nil
  26. }
  27. // Wait for height will poll status at reasonable intervals until
  28. // the block at the given height is available.
  29. //
  30. // If waiter is nil, we use DefaultWaitStrategy, but you can also
  31. // provide your own implementation
  32. func WaitForHeight(ctx context.Context, c StatusClient, h int64, waiter Waiter) error {
  33. if waiter == nil {
  34. waiter = DefaultWaitStrategy
  35. }
  36. delta := int64(1)
  37. for delta > 0 {
  38. s, err := c.Status(ctx)
  39. if err != nil {
  40. return err
  41. }
  42. delta = h - s.SyncInfo.LatestBlockHeight
  43. // wait for the time, or abort early
  44. if err := waiter(delta); err != nil {
  45. return err
  46. }
  47. }
  48. return nil
  49. }
  50. // WaitForOneEvent subscribes to a websocket event for the given
  51. // event time and returns upon receiving it one time, or
  52. // when the timeout duration has expired.
  53. //
  54. // This handles subscribing and unsubscribing under the hood
  55. func WaitForOneEvent(c EventsClient, eventValue string, timeout time.Duration) (types.TMEventData, error) {
  56. const subscriber = "helpers"
  57. ctx, cancel := context.WithTimeout(context.Background(), timeout)
  58. defer cancel()
  59. // register for the next event of this type
  60. eventCh, err := c.Subscribe(ctx, subscriber, types.QueryForEvent(eventValue).String())
  61. if err != nil {
  62. return nil, fmt.Errorf("failed to subscribe: %w", err)
  63. }
  64. // make sure to un-register after the test is over
  65. defer func() {
  66. if deferErr := c.UnsubscribeAll(ctx, subscriber); deferErr != nil {
  67. panic(err)
  68. }
  69. }()
  70. select {
  71. case event := <-eventCh:
  72. return event.Data, nil
  73. case <-ctx.Done():
  74. return nil, errors.New("timed out waiting for event")
  75. }
  76. }
  77. var (
  78. // ErrClientRunning is returned by Start when the client is already running.
  79. ErrClientRunning = errors.New("client already running")
  80. // ErrClientNotRunning is returned by Stop when the client is not running.
  81. ErrClientNotRunning = errors.New("client is not running")
  82. )
  83. // RunState is a helper that a client implementation can embed to implement
  84. // common plumbing for keeping track of run state and logging.
  85. //
  86. // TODO(creachadair): This type is a temporary measure, and will be removed.
  87. // See the discussion on #6971.
  88. type RunState struct {
  89. Logger log.Logger
  90. mu sync.Mutex
  91. name string
  92. isRunning bool
  93. }
  94. // NewRunState returns a new unstarted run state tracker with the given logging
  95. // label and log sink. If logger == nil, a no-op logger is provided by default.
  96. func NewRunState(name string, logger log.Logger) *RunState {
  97. if logger == nil {
  98. logger = log.NewNopLogger()
  99. }
  100. return &RunState{
  101. name: name,
  102. Logger: logger,
  103. }
  104. }
  105. // Start sets the state to running, or reports an error.
  106. func (r *RunState) Start(context.Context) error {
  107. r.mu.Lock()
  108. defer r.mu.Unlock()
  109. if r.isRunning {
  110. r.Logger.Error("not starting client, it is already started", "client", r.name)
  111. return ErrClientRunning
  112. }
  113. r.Logger.Info("starting client", "client", r.name)
  114. r.isRunning = true
  115. return nil
  116. }
  117. // Stop sets the state to not running, or reports an error.
  118. func (r *RunState) Stop() error {
  119. r.mu.Lock()
  120. defer r.mu.Unlock()
  121. if !r.isRunning {
  122. r.Logger.Error("not stopping client; it is already stopped", "client", r.name)
  123. return ErrClientNotRunning
  124. }
  125. r.Logger.Info("stopping client", "client", r.name)
  126. r.isRunning = false
  127. return nil
  128. }
  129. // IsRunning reports whether the state is running.
  130. func (r *RunState) IsRunning() bool {
  131. r.mu.Lock()
  132. defer r.mu.Unlock()
  133. return r.isRunning
  134. }