You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

191 lines
6.6 KiB

p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: Implement PeerTransport This is the implementation for the design described in ADR 12[0]. It's the first step of a larger refactor of the p2p package as tracked in interface bundling all concerns of low-level connection handling and isolating the rest of peer lifecycle management from the specifics of the low-level internet protocols. Even if the swappable implementation will never be utilised, already the isolation of conn related code in one place will help with the reasoning about execution path and addressation of security sensitive issues surfaced through bounty programs and audits. We deliberately decided to not have Peer filtering and other management in the Transport, its sole responsibility is the translation of connections to Peers, handing those to the caller fully setup. It's the responsibility of the caller to reject those and or keep track. Peer filtering will take place in the Switch and can be inspected in a the following commit. This changeset additionally is an exercise in clean separation of logic and other infrastructural concerns like logging and instrumentation. By leveraging a clean and minimal interface. How this looks can be seen in a follow-up change. Design #2069[2] Refs #2067[3] Fixes #2047[4] Fixes #2046[5] changes: * describe Transport interface * implement new default Transport: MultiplexTransport * test MultiplexTransport with new constraints * implement ConnSet for concurrent management of net.Conn, synchronous to PeerSet * implement and expose duplicate IP filter * implemnt TransportOption for optional parametirisation [0] https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md [1] https://github.com/tendermint/tendermint/issues/2067 [2] https://github.com/tendermint/tendermint/pull/2069 [3] https://github.com/tendermint/tendermint/issues/2067 [4] https://github.com/tendermint/tendermint/issues/2047 [5] https://github.com/tendermint/tendermint/issues/2046
6 years ago
  1. package p2p
  2. import (
  3. "context"
  4. "errors"
  5. "fmt"
  6. "net"
  7. "github.com/tendermint/tendermint/crypto"
  8. "github.com/tendermint/tendermint/p2p/conn"
  9. )
  10. const (
  11. // defaultProtocol is the default protocol used for NodeAddress when
  12. // a protocol isn't explicitly given as a URL scheme.
  13. defaultProtocol Protocol = MConnProtocol
  14. )
  15. // Protocol identifies a transport protocol.
  16. type Protocol string
  17. // Transport is a connection-oriented mechanism for exchanging data with a peer.
  18. type Transport interface {
  19. // Protocols returns the protocols supported by the transport. The Router
  20. // uses this to pick a transport for an Endpoint.
  21. Protocols() []Protocol
  22. // Endpoints returns the local endpoints the transport is listening on, if any.
  23. //
  24. // How to listen is transport-dependent, e.g. MConnTransport uses Listen() while
  25. // MemoryTransport starts listening via MemoryNetwork.CreateTransport().
  26. Endpoints() []Endpoint
  27. // Accept waits for the next inbound connection on a listening endpoint, blocking
  28. // until either a connection is available or the transport is closed. On closure,
  29. // io.EOF is returned and further Accept calls are futile.
  30. Accept() (Connection, error)
  31. // Dial creates an outbound connection to an endpoint.
  32. Dial(context.Context, Endpoint) (Connection, error)
  33. // Close stops accepting new connections, but does not close active connections.
  34. Close() error
  35. // Stringer is used to display the transport, e.g. in logs.
  36. //
  37. // Without this, the logger may use reflection to access and display
  38. // internal fields. These can be written to concurrently, which can trigger
  39. // the race detector or even cause a panic.
  40. fmt.Stringer
  41. }
  42. // Connection represents an established connection between two endpoints.
  43. //
  44. // FIXME: This is a temporary interface for backwards-compatibility with the
  45. // current MConnection-protocol, which is message-oriented. It should be
  46. // migrated to a byte-oriented multi-stream interface instead, which would allow
  47. // e.g. adopting QUIC and making message framing, traffic scheduling, and node
  48. // handshakes a Router concern shared across all transports. However, this
  49. // requires MConnection protocol changes or a shim. For details, see:
  50. // https://github.com/tendermint/spec/pull/227
  51. //
  52. // FIXME: The interface is currently very broad in order to accommodate
  53. // MConnection behavior that the legacy P2P stack relies on. It should be
  54. // cleaned up when the legacy stack is removed.
  55. type Connection interface {
  56. // Handshake executes a node handshake with the remote peer. It must be
  57. // called immediately after the connection is established, and returns the
  58. // remote peer's node info and public key. The caller is responsible for
  59. // validation.
  60. //
  61. // FIXME: The handshake should really be the Router's responsibility, but
  62. // that requires the connection interface to be byte-oriented rather than
  63. // message-oriented (see comment above).
  64. Handshake(context.Context, NodeInfo, crypto.PrivKey) (NodeInfo, crypto.PubKey, error)
  65. // ReceiveMessage returns the next message received on the connection,
  66. // blocking until one is available. Returns io.EOF if closed.
  67. ReceiveMessage() (ChannelID, []byte, error)
  68. // SendMessage sends a message on the connection. Returns io.EOF if closed.
  69. //
  70. // FIXME: For compatibility with the legacy P2P stack, it returns an
  71. // additional boolean false if the message timed out waiting to be accepted
  72. // into the send buffer. This should be removed.
  73. SendMessage(ChannelID, []byte) (bool, error)
  74. // TrySendMessage is a non-blocking version of SendMessage that returns
  75. // immediately if the message buffer is full. It returns true if the message
  76. // was accepted.
  77. //
  78. // FIXME: This method is here for backwards-compatibility with the legacy
  79. // P2P stack and should be removed.
  80. TrySendMessage(ChannelID, []byte) (bool, error)
  81. // LocalEndpoint returns the local endpoint for the connection.
  82. LocalEndpoint() Endpoint
  83. // RemoteEndpoint returns the remote endpoint for the connection.
  84. RemoteEndpoint() Endpoint
  85. // Close closes the connection.
  86. Close() error
  87. // FlushClose flushes all pending sends and then closes the connection.
  88. //
  89. // FIXME: This only exists for backwards-compatibility with the current
  90. // MConnection implementation. There should really be a separate Flush()
  91. // method, but there is no easy way to synchronously flush pending data with
  92. // the current MConnection code.
  93. FlushClose() error
  94. // Status returns the current connection status.
  95. // FIXME: Only here for compatibility with the current Peer code.
  96. Status() conn.ConnectionStatus
  97. // Stringer is used to display the connection, e.g. in logs.
  98. //
  99. // Without this, the logger may use reflection to access and display
  100. // internal fields. These can be written to concurrently, which can trigger
  101. // the race detector or even cause a panic.
  102. fmt.Stringer
  103. }
  104. // Endpoint represents a transport connection endpoint, either local or remote.
  105. //
  106. // Endpoints are not necessarily networked (see e.g. MemoryTransport) but all
  107. // networked endpoints must use IP as the underlying transport protocol to allow
  108. // e.g. IP address filtering. Either IP or Path (or both) must be set.
  109. type Endpoint struct {
  110. // Protocol specifies the transport protocol.
  111. Protocol Protocol
  112. // IP is an IP address (v4 or v6) to connect to. If set, this defines the
  113. // endpoint as a networked endpoint.
  114. IP net.IP
  115. // Port is a network port (either TCP or UDP). If 0, a default port may be
  116. // used depending on the protocol.
  117. Port uint16
  118. // Path is an optional transport-specific path or identifier.
  119. Path string
  120. }
  121. // NodeAddress converts the endpoint into a NodeAddress for the given node ID.
  122. func (e Endpoint) NodeAddress(nodeID NodeID) NodeAddress {
  123. address := NodeAddress{
  124. NodeID: nodeID,
  125. Protocol: e.Protocol,
  126. Path: e.Path,
  127. }
  128. if len(e.IP) > 0 {
  129. address.Hostname = e.IP.String()
  130. address.Port = e.Port
  131. }
  132. return address
  133. }
  134. // String formats the endpoint as a URL string.
  135. func (e Endpoint) String() string {
  136. // If this is a non-networked endpoint with a valid node ID as a path,
  137. // assume that path is a node ID (to handle opaque URLs of the form
  138. // scheme:id).
  139. if e.IP == nil {
  140. if nodeID, err := NewNodeID(e.Path); err == nil {
  141. return e.NodeAddress(nodeID).String()
  142. }
  143. }
  144. return e.NodeAddress("").String()
  145. }
  146. // Validate validates the endpoint.
  147. func (e Endpoint) Validate() error {
  148. switch {
  149. case e.Protocol == "":
  150. return errors.New("endpoint has no protocol")
  151. case len(e.IP) > 0 && e.IP.To16() == nil:
  152. return fmt.Errorf("invalid IP address %v", e.IP)
  153. case e.Port > 0 && len(e.IP) == 0:
  154. return fmt.Errorf("endpoint has port %v but no IP", e.Port)
  155. case len(e.IP) == 0 && e.Path == "":
  156. return errors.New("endpoint has neither path nor IP")
  157. default:
  158. return nil
  159. }
  160. }