blockchain: Reorg reactor (#3561)
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
6 years ago blockchain: Reorg reactor (#3561)
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
6 years ago blockchain: Reorg reactor (#3561)
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
6 years ago blockchain: Reorg reactor (#3561)
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
6 years ago |
|
- package v1
-
- import (
- "errors"
- "fmt"
- "reflect"
- "time"
-
- amino "github.com/tendermint/go-amino"
- "github.com/tendermint/tendermint/behaviour"
- "github.com/tendermint/tendermint/libs/log"
- "github.com/tendermint/tendermint/p2p"
- sm "github.com/tendermint/tendermint/state"
- "github.com/tendermint/tendermint/store"
- "github.com/tendermint/tendermint/types"
- )
-
- const (
- // BlockchainChannel is a channel for blocks and status updates (`BlockStore` height)
- BlockchainChannel = byte(0x40)
- trySyncIntervalMS = 10
- trySendIntervalMS = 10
-
- // ask for best height every 10s
- statusUpdateIntervalSeconds = 10
-
- // NOTE: keep up to date with bcBlockResponseMessage
- bcBlockResponseMessagePrefixSize = 4
- bcBlockResponseMessageFieldKeySize = 1
- maxMsgSize = types.MaxBlockSizeBytes +
- bcBlockResponseMessagePrefixSize +
- bcBlockResponseMessageFieldKeySize
- )
-
- var (
- // Maximum number of requests that can be pending per peer, i.e. for which requests have been sent but blocks
- // have not been received.
- maxRequestsPerPeer = 20
- // Maximum number of block requests for the reactor, pending or for which blocks have been received.
- maxNumRequests = 64
- )
-
- type consensusReactor interface {
- // for when we switch from blockchain reactor and fast sync to
- // the consensus machine
- SwitchToConsensus(sm.State, int)
- }
-
- // BlockchainReactor handles long-term catchup syncing.
- type BlockchainReactor struct {
- p2p.BaseReactor
-
- initialState sm.State // immutable
- state sm.State
-
- blockExec *sm.BlockExecutor
- store *store.BlockStore
-
- fastSync bool
-
- fsm *BcReactorFSM
- blocksSynced int
-
- // Receive goroutine forwards messages to this channel to be processed in the context of the poolRoutine.
- messagesForFSMCh chan bcReactorMessage
-
- // Switch goroutine may send RemovePeer to the blockchain reactor. This is an error message that is relayed
- // to this channel to be processed in the context of the poolRoutine.
- errorsForFSMCh chan bcReactorMessage
-
- // This channel is used by the FSM and indirectly the block pool to report errors to the blockchain reactor and
- // the switch.
- eventsFromFSMCh chan bcFsmMessage
-
- swReporter *behaviour.SwitchReporter
- }
-
- // NewBlockchainReactor returns new reactor instance.
- func NewBlockchainReactor(state sm.State, blockExec *sm.BlockExecutor, store *store.BlockStore,
- fastSync bool) *BlockchainReactor {
-
- if state.LastBlockHeight != store.Height() {
- panic(fmt.Sprintf("state (%v) and store (%v) height mismatch", state.LastBlockHeight,
- store.Height()))
- }
-
- const capacity = 1000
- eventsFromFSMCh := make(chan bcFsmMessage, capacity)
- messagesForFSMCh := make(chan bcReactorMessage, capacity)
- errorsForFSMCh := make(chan bcReactorMessage, capacity)
-
- startHeight := store.Height() + 1
- bcR := &BlockchainReactor{
- initialState: state,
- state: state,
- blockExec: blockExec,
- fastSync: fastSync,
- store: store,
- messagesForFSMCh: messagesForFSMCh,
- eventsFromFSMCh: eventsFromFSMCh,
- errorsForFSMCh: errorsForFSMCh,
- }
- fsm := NewFSM(startHeight, bcR)
- bcR.fsm = fsm
- bcR.BaseReactor = *p2p.NewBaseReactor("BlockchainReactor", bcR)
- //bcR.swReporter = behaviour.NewSwitcReporter(bcR.BaseReactor.Switch)
-
- return bcR
- }
-
- // bcReactorMessage is used by the reactor to send messages to the FSM.
- type bcReactorMessage struct {
- event bReactorEvent
- data bReactorEventData
- }
-
- type bFsmEvent uint
-
- const (
- // message type events
- peerErrorEv = iota + 1
- syncFinishedEv
- )
-
- type bFsmEventData struct {
- peerID p2p.ID
- err error
- }
-
- // bcFsmMessage is used by the FSM to send messages to the reactor
- type bcFsmMessage struct {
- event bFsmEvent
- data bFsmEventData
- }
-
- // SetLogger implements cmn.Service by setting the logger on reactor and pool.
- func (bcR *BlockchainReactor) SetLogger(l log.Logger) {
- bcR.BaseService.Logger = l
- bcR.fsm.SetLogger(l)
- }
-
- // OnStart implements cmn.Service.
- func (bcR *BlockchainReactor) OnStart() error {
- bcR.swReporter = behaviour.NewSwitcReporter(bcR.BaseReactor.Switch)
- if bcR.fastSync {
- go bcR.poolRoutine()
- }
- return nil
- }
-
- // OnStop implements cmn.Service.
- func (bcR *BlockchainReactor) OnStop() {
- _ = bcR.Stop()
- }
-
- // GetChannels implements Reactor
- func (bcR *BlockchainReactor) GetChannels() []*p2p.ChannelDescriptor {
- return []*p2p.ChannelDescriptor{
- {
- ID: BlockchainChannel,
- Priority: 10,
- SendQueueCapacity: 2000,
- RecvBufferCapacity: 50 * 4096,
- RecvMessageCapacity: maxMsgSize,
- },
- }
- }
-
- // AddPeer implements Reactor by sending our state to peer.
- func (bcR *BlockchainReactor) AddPeer(peer p2p.Peer) {
- msgBytes := cdc.MustMarshalBinaryBare(&bcStatusResponseMessage{bcR.store.Height()})
- peer.Send(BlockchainChannel, msgBytes)
- // it's OK if send fails. will try later in poolRoutine
-
- // peer is added to the pool once we receive the first
- // bcStatusResponseMessage from the peer and call pool.updatePeer()
- }
-
- // sendBlockToPeer loads a block and sends it to the requesting peer.
- // If the block doesn't exist a bcNoBlockResponseMessage is sent.
- // If all nodes are honest, no node should be requesting for a block that doesn't exist.
- func (bcR *BlockchainReactor) sendBlockToPeer(msg *bcBlockRequestMessage,
- src p2p.Peer) (queued bool) {
-
- block := bcR.store.LoadBlock(msg.Height)
- if block != nil {
- msgBytes := cdc.MustMarshalBinaryBare(&bcBlockResponseMessage{Block: block})
- return src.TrySend(BlockchainChannel, msgBytes)
- }
-
- bcR.Logger.Info("peer asking for a block we don't have", "src", src, "height", msg.Height)
-
- msgBytes := cdc.MustMarshalBinaryBare(&bcNoBlockResponseMessage{Height: msg.Height})
- return src.TrySend(BlockchainChannel, msgBytes)
- }
-
- func (bcR *BlockchainReactor) sendStatusResponseToPeer(msg *bcStatusRequestMessage, src p2p.Peer) (queued bool) {
- msgBytes := cdc.MustMarshalBinaryBare(&bcStatusResponseMessage{bcR.store.Height()})
- return src.TrySend(BlockchainChannel, msgBytes)
- }
-
- // RemovePeer implements Reactor by removing peer from the pool.
- func (bcR *BlockchainReactor) RemovePeer(peer p2p.Peer, reason interface{}) {
- msgData := bcReactorMessage{
- event: peerRemoveEv,
- data: bReactorEventData{
- peerID: peer.ID(),
- err: errSwitchRemovesPeer,
- },
- }
- bcR.errorsForFSMCh <- msgData
- }
-
- // Receive implements Reactor by handling 4 types of messages (look below).
- func (bcR *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
- msg, err := decodeMsg(msgBytes)
- if err != nil {
- bcR.Logger.Error("error decoding message",
- "src", src, "chId", chID, "msg", msg, "err", err, "bytes", msgBytes)
- _ = bcR.swReporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
- return
- }
-
- if err = msg.ValidateBasic(); err != nil {
- bcR.Logger.Error("peer sent us invalid msg", "peer", src, "msg", msg, "err", err)
- _ = bcR.swReporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
- return
- }
-
- bcR.Logger.Debug("Receive", "src", src, "chID", chID, "msg", msg)
-
- switch msg := msg.(type) {
- case *bcBlockRequestMessage:
- if queued := bcR.sendBlockToPeer(msg, src); !queued {
- // Unfortunately not queued since the queue is full.
- bcR.Logger.Error("Could not send block message to peer", "src", src, "height", msg.Height)
- }
-
- case *bcStatusRequestMessage:
- // Send peer our state.
- if queued := bcR.sendStatusResponseToPeer(msg, src); !queued {
- // Unfortunately not queued since the queue is full.
- bcR.Logger.Error("Could not send status message to peer", "src", src)
- }
-
- case *bcBlockResponseMessage:
- msgForFSM := bcReactorMessage{
- event: blockResponseEv,
- data: bReactorEventData{
- peerID: src.ID(),
- height: msg.Block.Height,
- block: msg.Block,
- length: len(msgBytes),
- },
- }
- bcR.Logger.Info("Received", "src", src, "height", msg.Block.Height)
- bcR.messagesForFSMCh <- msgForFSM
-
- case *bcStatusResponseMessage:
- // Got a peer status. Unverified.
- msgForFSM := bcReactorMessage{
- event: statusResponseEv,
- data: bReactorEventData{
- peerID: src.ID(),
- height: msg.Height,
- length: len(msgBytes),
- },
- }
- bcR.messagesForFSMCh <- msgForFSM
-
- default:
- bcR.Logger.Error(fmt.Sprintf("unknown message type %v", reflect.TypeOf(msg)))
- }
- }
-
- // processBlocksRoutine processes blocks until signlaed to stop over the stopProcessing channel
- func (bcR *BlockchainReactor) processBlocksRoutine(stopProcessing chan struct{}) {
-
- processReceivedBlockTicker := time.NewTicker(trySyncIntervalMS * time.Millisecond)
- doProcessBlockCh := make(chan struct{}, 1)
-
- lastHundred := time.Now()
- lastRate := 0.0
-
- ForLoop:
- for {
- select {
- case <-stopProcessing:
- bcR.Logger.Info("finishing block execution")
- break ForLoop
- case <-processReceivedBlockTicker.C: // try to execute blocks
- select {
- case doProcessBlockCh <- struct{}{}:
- default:
- }
- case <-doProcessBlockCh:
- for {
- err := bcR.processBlock()
- if err == errMissingBlock {
- break
- }
- // Notify FSM of block processing result.
- msgForFSM := bcReactorMessage{
- event: processedBlockEv,
- data: bReactorEventData{
- err: err,
- },
- }
- _ = bcR.fsm.Handle(&msgForFSM)
-
- if err != nil {
- break
- }
-
- bcR.blocksSynced++
- if bcR.blocksSynced%100 == 0 {
- lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
- height, maxPeerHeight := bcR.fsm.Status()
- bcR.Logger.Info("Fast Sync Rate", "height", height,
- "max_peer_height", maxPeerHeight, "blocks/s", lastRate)
- lastHundred = time.Now()
- }
- }
- }
- }
- }
-
- // poolRoutine receives and handles messages from the Receive() routine and from the FSM.
- func (bcR *BlockchainReactor) poolRoutine() {
-
- bcR.fsm.Start()
-
- sendBlockRequestTicker := time.NewTicker(trySendIntervalMS * time.Millisecond)
- statusUpdateTicker := time.NewTicker(statusUpdateIntervalSeconds * time.Second)
-
- stopProcessing := make(chan struct{}, 1)
- go bcR.processBlocksRoutine(stopProcessing)
-
- ForLoop:
- for {
- select {
-
- case <-sendBlockRequestTicker.C:
- if !bcR.fsm.NeedsBlocks() {
- continue
- }
- _ = bcR.fsm.Handle(&bcReactorMessage{
- event: makeRequestsEv,
- data: bReactorEventData{
- maxNumRequests: maxNumRequests}})
-
- case <-statusUpdateTicker.C:
- // Ask for status updates.
- go bcR.sendStatusRequest()
-
- case msg := <-bcR.messagesForFSMCh:
- // Sent from the Receive() routine when status (statusResponseEv) and
- // block (blockResponseEv) response events are received
- _ = bcR.fsm.Handle(&msg)
-
- case msg := <-bcR.errorsForFSMCh:
- // Sent from the switch.RemovePeer() routine (RemovePeerEv) and
- // FSM state timer expiry routine (stateTimeoutEv).
- _ = bcR.fsm.Handle(&msg)
-
- case msg := <-bcR.eventsFromFSMCh:
- switch msg.event {
- case syncFinishedEv:
- stopProcessing <- struct{}{}
- // Sent from the FSM when it enters finished state.
- break ForLoop
- case peerErrorEv:
- // Sent from the FSM when it detects peer error
- bcR.reportPeerErrorToSwitch(msg.data.err, msg.data.peerID)
- if msg.data.err == errNoPeerResponse {
- // Sent from the peer timeout handler routine
- _ = bcR.fsm.Handle(&bcReactorMessage{
- event: peerRemoveEv,
- data: bReactorEventData{
- peerID: msg.data.peerID,
- err: msg.data.err,
- },
- })
- }
- // else {
- // For slow peers, or errors due to blocks received from wrong peer
- // the FSM had already removed the peers
- // }
- default:
- bcR.Logger.Error("Event from FSM not supported", "type", msg.event)
- }
-
- case <-bcR.Quit():
- break ForLoop
- }
- }
- }
-
- func (bcR *BlockchainReactor) reportPeerErrorToSwitch(err error, peerID p2p.ID) {
- peer := bcR.Switch.Peers().Get(peerID)
- if peer != nil {
- _ = bcR.swReporter.Report(behaviour.BadMessage(peerID, err.Error()))
- }
- }
-
- func (bcR *BlockchainReactor) processBlock() error {
-
- first, second, err := bcR.fsm.FirstTwoBlocks()
- if err != nil {
- // We need both to sync the first block.
- return err
- }
-
- chainID := bcR.initialState.ChainID
-
- firstParts := first.MakePartSet(types.BlockPartSizeBytes)
- firstPartsHeader := firstParts.Header()
- firstID := types.BlockID{Hash: first.Hash(), PartsHeader: firstPartsHeader}
- // Finally, verify the first block using the second's commit
- // NOTE: we can probably make this more efficient, but note that calling
- // first.Hash() doesn't verify the tx contents, so MakePartSet() is
- // currently necessary.
- err = bcR.state.Validators.VerifyCommit(chainID, firstID, first.Height, second.LastCommit)
- if err != nil {
- bcR.Logger.Error("error during commit verification", "err", err,
- "first", first.Height, "second", second.Height)
- return errBlockVerificationFailure
- }
-
- bcR.store.SaveBlock(first, firstParts, second.LastCommit)
-
- bcR.state, err = bcR.blockExec.ApplyBlock(bcR.state, firstID, first)
- if err != nil {
- panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
- }
-
- return nil
- }
-
- // Implements bcRNotifier
- // sendStatusRequest broadcasts `BlockStore` height.
- func (bcR *BlockchainReactor) sendStatusRequest() {
- msgBytes := cdc.MustMarshalBinaryBare(&bcStatusRequestMessage{bcR.store.Height()})
- bcR.Switch.Broadcast(BlockchainChannel, msgBytes)
- }
-
- // Implements bcRNotifier
- // BlockRequest sends `BlockRequest` height.
- func (bcR *BlockchainReactor) sendBlockRequest(peerID p2p.ID, height int64) error {
- peer := bcR.Switch.Peers().Get(peerID)
- if peer == nil {
- return errNilPeerForBlockRequest
- }
-
- msgBytes := cdc.MustMarshalBinaryBare(&bcBlockRequestMessage{height})
- queued := peer.TrySend(BlockchainChannel, msgBytes)
- if !queued {
- return errSendQueueFull
- }
- return nil
- }
-
- // Implements bcRNotifier
- func (bcR *BlockchainReactor) switchToConsensus() {
- conR, ok := bcR.Switch.Reactor("CONSENSUS").(consensusReactor)
- if ok {
- conR.SwitchToConsensus(bcR.state, bcR.blocksSynced)
- bcR.eventsFromFSMCh <- bcFsmMessage{event: syncFinishedEv}
- }
- // else {
- // Should only happen during testing.
- // }
- }
-
- // Implements bcRNotifier
- // Called by FSM and pool:
- // - pool calls when it detects slow peer or when peer times out
- // - FSM calls when:
- // - adding a block (addBlock) fails
- // - reactor processing of a block reports failure and FSM sends back the peers of first and second blocks
- func (bcR *BlockchainReactor) sendPeerError(err error, peerID p2p.ID) {
- bcR.Logger.Info("sendPeerError:", "peer", peerID, "error", err)
- msgData := bcFsmMessage{
- event: peerErrorEv,
- data: bFsmEventData{
- peerID: peerID,
- err: err,
- },
- }
- bcR.eventsFromFSMCh <- msgData
- }
-
- // Implements bcRNotifier
- func (bcR *BlockchainReactor) resetStateTimer(name string, timer **time.Timer, timeout time.Duration) {
- if timer == nil {
- panic("nil timer pointer parameter")
- }
- if *timer == nil {
- *timer = time.AfterFunc(timeout, func() {
- msg := bcReactorMessage{
- event: stateTimeoutEv,
- data: bReactorEventData{
- stateName: name,
- },
- }
- bcR.errorsForFSMCh <- msg
- })
- } else {
- (*timer).Reset(timeout)
- }
- }
-
- //-----------------------------------------------------------------------------
- // Messages
-
- // BlockchainMessage is a generic message for this reactor.
- type BlockchainMessage interface {
- ValidateBasic() error
- }
-
- // RegisterBlockchainMessages registers the fast sync messages for amino encoding.
- func RegisterBlockchainMessages(cdc *amino.Codec) {
- cdc.RegisterInterface((*BlockchainMessage)(nil), nil)
- cdc.RegisterConcrete(&bcBlockRequestMessage{}, "tendermint/blockchain/BlockRequest", nil)
- cdc.RegisterConcrete(&bcBlockResponseMessage{}, "tendermint/blockchain/BlockResponse", nil)
- cdc.RegisterConcrete(&bcNoBlockResponseMessage{}, "tendermint/blockchain/NoBlockResponse", nil)
- cdc.RegisterConcrete(&bcStatusResponseMessage{}, "tendermint/blockchain/StatusResponse", nil)
- cdc.RegisterConcrete(&bcStatusRequestMessage{}, "tendermint/blockchain/StatusRequest", nil)
- }
-
- func decodeMsg(bz []byte) (msg BlockchainMessage, err error) {
- if len(bz) > maxMsgSize {
- return msg, fmt.Errorf("msg exceeds max size (%d > %d)", len(bz), maxMsgSize)
- }
- err = cdc.UnmarshalBinaryBare(bz, &msg)
- return
- }
-
- //-------------------------------------
-
- type bcBlockRequestMessage struct {
- Height int64
- }
-
- // ValidateBasic performs basic validation.
- func (m *bcBlockRequestMessage) ValidateBasic() error {
- if m.Height < 0 {
- return errors.New("negative Height")
- }
- return nil
- }
-
- func (m *bcBlockRequestMessage) String() string {
- return fmt.Sprintf("[bcBlockRequestMessage %v]", m.Height)
- }
-
- type bcNoBlockResponseMessage struct {
- Height int64
- }
-
- // ValidateBasic performs basic validation.
- func (m *bcNoBlockResponseMessage) ValidateBasic() error {
- if m.Height < 0 {
- return errors.New("negative Height")
- }
- return nil
- }
-
- func (m *bcNoBlockResponseMessage) String() string {
- return fmt.Sprintf("[bcNoBlockResponseMessage %d]", m.Height)
- }
-
- //-------------------------------------
-
- type bcBlockResponseMessage struct {
- Block *types.Block
- }
-
- // ValidateBasic performs basic validation.
- func (m *bcBlockResponseMessage) ValidateBasic() error {
- return m.Block.ValidateBasic()
- }
-
- func (m *bcBlockResponseMessage) String() string {
- return fmt.Sprintf("[bcBlockResponseMessage %v]", m.Block.Height)
- }
-
- //-------------------------------------
-
- type bcStatusRequestMessage struct {
- Height int64
- }
-
- // ValidateBasic performs basic validation.
- func (m *bcStatusRequestMessage) ValidateBasic() error {
- if m.Height < 0 {
- return errors.New("negative Height")
- }
- return nil
- }
-
- func (m *bcStatusRequestMessage) String() string {
- return fmt.Sprintf("[bcStatusRequestMessage %v]", m.Height)
- }
-
- //-------------------------------------
-
- type bcStatusResponseMessage struct {
- Height int64
- }
-
- // ValidateBasic performs basic validation.
- func (m *bcStatusResponseMessage) ValidateBasic() error {
- if m.Height < 0 {
- return errors.New("negative Height")
- }
- return nil
- }
-
- func (m *bcStatusResponseMessage) String() string {
- return fmt.Sprintf("[bcStatusResponseMessage %v]", m.Height)
- }
|