You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

137 lines
3.6 KiB

rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
lint: Enable Golint (#4212) * Fix many golint errors * Fix golint errors in the 'lite' package * Don't export Pool.store * Fix typo * Revert unwanted changes * Fix errors in counter package * Fix linter errors in kvstore package * Fix linter error in example package * Fix error in tests package * Fix linter errors in v2 package * Fix linter errors in consensus package * Fix linter errors in evidence package * Fix linter error in fail package * Fix linter errors in query package * Fix linter errors in core package * Fix linter errors in node package * Fix linter errors in mempool package * Fix linter error in conn package * Fix linter errors in pex package * Rename PEXReactor export to Reactor * Fix linter errors in trust package * Fix linter errors in upnp package * Fix linter errors in p2p package * Fix linter errors in proxy package * Fix linter errors in mock_test package * Fix linter error in client_test package * Fix linter errors in coretypes package * Fix linter errors in coregrpc package * Fix linter errors in rpcserver package * Fix linter errors in rpctypes package * Fix linter errors in rpctest package * Fix linter error in json2wal script * Fix linter error in wal2json script * Fix linter errors in kv package * Fix linter error in state package * Fix linter error in grpc_client * Fix linter errors in types package * Fix linter error in version package * Fix remaining errors * Address review comments * Fix broken tests * Reconcile package coregrpc * Fix golangci bot error * Fix new golint errors * Fix broken reference * Enable golint linter * minor changes to bring golint into line * fix failing test * fix pex reactor naming * address PR comments
5 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
lint: Enable Golint (#4212) * Fix many golint errors * Fix golint errors in the 'lite' package * Don't export Pool.store * Fix typo * Revert unwanted changes * Fix errors in counter package * Fix linter errors in kvstore package * Fix linter error in example package * Fix error in tests package * Fix linter errors in v2 package * Fix linter errors in consensus package * Fix linter errors in evidence package * Fix linter error in fail package * Fix linter errors in query package * Fix linter errors in core package * Fix linter errors in node package * Fix linter errors in mempool package * Fix linter error in conn package * Fix linter errors in pex package * Rename PEXReactor export to Reactor * Fix linter errors in trust package * Fix linter errors in upnp package * Fix linter errors in p2p package * Fix linter errors in proxy package * Fix linter errors in mock_test package * Fix linter error in client_test package * Fix linter errors in coretypes package * Fix linter errors in coregrpc package * Fix linter errors in rpcserver package * Fix linter errors in rpctypes package * Fix linter errors in rpctest package * Fix linter error in json2wal script * Fix linter error in wal2json script * Fix linter errors in kv package * Fix linter error in state package * Fix linter error in grpc_client * Fix linter errors in types package * Fix linter error in version package * Fix remaining errors * Address review comments * Fix broken tests * Reconcile package coregrpc * Fix golangci bot error * Fix new golint errors * Fix broken reference * Enable golint linter * minor changes to bring golint into line * fix failing test * fix pex reactor naming * address PR comments
5 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
  1. package client_test
  2. import (
  3. "bytes"
  4. "context"
  5. "fmt"
  6. "log"
  7. "github.com/tendermint/tendermint/abci/example/kvstore"
  8. rpchttp "github.com/tendermint/tendermint/rpc/client/http"
  9. ctypes "github.com/tendermint/tendermint/rpc/core/types"
  10. rpctest "github.com/tendermint/tendermint/rpc/test"
  11. )
  12. func ExampleHTTP_simple() {
  13. // Start a tendermint node (and kvstore) in the background to test against
  14. app := kvstore.NewApplication()
  15. node := rpctest.StartTendermint(app, rpctest.SuppressStdout, rpctest.RecreateConfig)
  16. defer rpctest.StopTendermint(node)
  17. // Create our RPC client
  18. rpcAddr := rpctest.GetConfig().RPC.ListenAddress
  19. c, err := rpchttp.New(rpcAddr)
  20. if err != nil {
  21. log.Fatal(err) //nolint:gocritic
  22. }
  23. // Create a transaction
  24. k := []byte("name")
  25. v := []byte("satoshi")
  26. tx := append(k, append([]byte("="), v...)...)
  27. // Broadcast the transaction and wait for it to commit (rather use
  28. // c.BroadcastTxSync though in production).
  29. bres, err := c.BroadcastTxCommit(context.Background(), tx)
  30. if err != nil {
  31. log.Fatal(err)
  32. }
  33. if bres.CheckTx.IsErr() || bres.DeliverTx.IsErr() {
  34. log.Fatal("BroadcastTxCommit transaction failed")
  35. }
  36. // Now try to fetch the value for the key
  37. qres, err := c.ABCIQuery(context.Background(), "/key", k)
  38. if err != nil {
  39. log.Fatal(err)
  40. }
  41. if qres.Response.IsErr() {
  42. log.Fatal("ABCIQuery failed")
  43. }
  44. if !bytes.Equal(qres.Response.Key, k) {
  45. log.Fatal("returned key does not match queried key")
  46. }
  47. if !bytes.Equal(qres.Response.Value, v) {
  48. log.Fatal("returned value does not match sent value")
  49. }
  50. fmt.Println("Sent tx :", string(tx))
  51. fmt.Println("Queried for :", string(qres.Response.Key))
  52. fmt.Println("Got value :", string(qres.Response.Value))
  53. // Output:
  54. // Sent tx : name=satoshi
  55. // Queried for : name
  56. // Got value : satoshi
  57. }
  58. func ExampleHTTP_batching() {
  59. // Start a tendermint node (and kvstore) in the background to test against
  60. app := kvstore.NewApplication()
  61. node := rpctest.StartTendermint(app, rpctest.SuppressStdout, rpctest.RecreateConfig)
  62. // Create our RPC client
  63. rpcAddr := rpctest.GetConfig().RPC.ListenAddress
  64. c, err := rpchttp.New(rpcAddr)
  65. if err != nil {
  66. log.Fatal(err)
  67. }
  68. defer rpctest.StopTendermint(node)
  69. // Create our two transactions
  70. k1 := []byte("firstName")
  71. v1 := []byte("satoshi")
  72. tx1 := append(k1, append([]byte("="), v1...)...)
  73. k2 := []byte("lastName")
  74. v2 := []byte("nakamoto")
  75. tx2 := append(k2, append([]byte("="), v2...)...)
  76. txs := [][]byte{tx1, tx2}
  77. // Create a new batch
  78. batch := c.NewBatch()
  79. // Queue up our transactions
  80. for _, tx := range txs {
  81. // Broadcast the transaction and wait for it to commit (rather use
  82. // c.BroadcastTxSync though in production).
  83. if _, err := batch.BroadcastTxCommit(context.Background(), tx); err != nil {
  84. log.Fatal(err) //nolint:gocritic
  85. }
  86. }
  87. // Send the batch of 2 transactions
  88. if _, err := batch.Send(context.Background()); err != nil {
  89. log.Fatal(err)
  90. }
  91. // Now let's query for the original results as a batch
  92. keys := [][]byte{k1, k2}
  93. for _, key := range keys {
  94. if _, err := batch.ABCIQuery(context.Background(), "/key", key); err != nil {
  95. log.Fatal(err)
  96. }
  97. }
  98. // Send the 2 queries and keep the results
  99. results, err := batch.Send(context.Background())
  100. if err != nil {
  101. log.Fatal(err)
  102. }
  103. // Each result in the returned list is the deserialized result of each
  104. // respective ABCIQuery response
  105. for _, result := range results {
  106. qr, ok := result.(*ctypes.ResultABCIQuery)
  107. if !ok {
  108. log.Fatal("invalid result type from ABCIQuery request")
  109. }
  110. fmt.Println(string(qr.Response.Key), "=", string(qr.Response.Value))
  111. }
  112. // Output:
  113. // firstName = satoshi
  114. // lastName = nakamoto
  115. }