tendermint/internal/p2p/router.go

package p2p

import (
	"context"
	"errors"
	"fmt"
	"io"
	"math/rand"
	"net"
	"runtime"
	"sync"
	"time"

	"github.com/gogo/protobuf/proto"

	"github.com/tendermint/tendermint/crypto"
	"github.com/tendermint/tendermint/libs/log"
	"github.com/tendermint/tendermint/libs/service"
	"github.com/tendermint/tendermint/types"
)

const queueBufferDefault = 32

// RouterOptions specifies options for a Router.
type RouterOptions struct {
	// ResolveTimeout is the timeout for resolving NodeAddress URLs.
	// 0 means no timeout.
	ResolveTimeout time.Duration

	// DialTimeout is the timeout for dialing a peer. 0 means no timeout.
	DialTimeout time.Duration

	// HandshakeTimeout is the timeout for handshaking with a peer. 0 means
	// no timeout.
	HandshakeTimeout time.Duration

	// QueueType must be, "priority", or "fifo". Defaults to
	// "fifo".
	QueueType string

	// MaxIncomingConnectionAttempts rate limits the number of incoming connection
	// attempts per IP address. Defaults to 100.
	MaxIncomingConnectionAttempts uint

	// IncomingConnectionWindow describes how often an IP address
	// can attempt to create a new connection. Defaults to 10
	// milliseconds, and cannot be less than 1 millisecond.
	IncomingConnectionWindow time.Duration

	// FilterPeerByIP is used by the router to inject filtering
	// behavior for new incoming connections. The router passes
	// the remote IP of the incoming connection the port number as
	// arguments. Functions should return an error to reject the
	// peer.
	FilterPeerByIP func(context.Context, net.IP, uint16) error

	// FilterPeerByID is used by the router to inject filtering
	// behavior for new incoming connections. The router passes
	// the NodeID of the node before completing the connection,
	// but this occurs after the handshake is complete. Filter by
	// IP address to filter before the handshake. Functions should
	// return an error to reject the peer.
	FilterPeerByID func(context.Context, types.NodeID) error

	// DialSleep controls the amount of time that the router
	// sleeps between dialing peers. If not set, a default value
	// is used that sleeps for a (random) amount of time up to 3
	// seconds between submitting each peer to be dialed.
	DialSleep func(context.Context)

	// NumConcrruentDials controls how many parallel go routines
	// are used to dial peers. This defaults to the value of
	// runtime.NumCPU.
	NumConcurrentDials func() int
}

const (
	queueTypeFifo     = "fifo"
	queueTypePriority = "priority"
)

// Validate validates router options.
func (o *RouterOptions) Validate() error {
	switch o.QueueType {
	case "":
		o.QueueType = queueTypeFifo
	case queueTypeFifo, queueTypePriority:
		// pass
	default:
		return fmt.Errorf("queue type %q is not supported", o.QueueType)
	}

	switch {
	case o.IncomingConnectionWindow == 0:
		o.IncomingConnectionWindow = 100 * time.Millisecond
	case o.IncomingConnectionWindow < time.Millisecond:
		return fmt.Errorf("incomming connection window must be grater than 1m [%s]",
			o.IncomingConnectionWindow)
	}

	if o.MaxIncomingConnectionAttempts == 0 {
		o.MaxIncomingConnectionAttempts = 100
	}

	return nil
}

// Router manages peer connections and routes messages between peers and reactor
// channels. It takes a PeerManager for peer lifecycle management (e.g. which
// peers to dial and when) and a set of Transports for connecting and
// communicating with peers.
//
// On startup, three main goroutines are spawned to maintain peer connections:
//
//   dialPeers(): in a loop, calls PeerManager.DialNext() to get the next peer
//   address to dial and spawns a goroutine that dials the peer, handshakes
//   with it, and begins to route messages if successful.
//
//   acceptPeers(): in a loop, waits for an inbound connection via
//   Transport.Accept() and spawns a goroutine that handshakes with it and
//   begins to route messages if successful.
//
//   evictPeers(): in a loop, calls PeerManager.EvictNext() to get the next
//   peer to evict, and disconnects it by closing its message queue.
//
// When a peer is connected, an outbound peer message queue is registered in
// peerQueues, and routePeer() is called to spawn off two additional goroutines:
//
//   sendPeer(): waits for an outbound message from the peerQueues queue,
//   marshals it, and passes it to the peer transport which delivers it.
//
//   receivePeer(): waits for an inbound message from the peer transport,
//   unmarshals it, and passes it to the appropriate inbound channel queue
//   in channelQueues.
//
// When a reactor opens a channel via OpenChannel, an inbound channel message
// queue is registered in channelQueues, and a channel goroutine is spawned:
//
//   routeChannel(): waits for an outbound message from the channel, looks
//   up the recipient peer's outbound message queue in peerQueues, and submits
//   the message to it.
//
// All channel sends in the router are blocking. It is the responsibility of the
// queue interface in peerQueues and channelQueues to prioritize and drop
// messages as appropriate during contention to prevent stalls and ensure good
// quality of service.
type Router struct {
	*service.BaseService
	logger log.Logger

	metrics            *Metrics
	options            RouterOptions
	nodeInfo           types.NodeInfo
	privKey            crypto.PrivKey
	peerManager        *PeerManager
	chDescs            []*ChannelDescriptor
	transports         []Transport
	endpoints          []Endpoint
	connTracker        connectionTracker
	protocolTransports map[Protocol]Transport

	peerMtx    sync.RWMutex
	peerQueues map[types.NodeID]queue // outbound messages per peer for all channels
	// the channels that the peer queue has open
	peerChannels map[types.NodeID]channelIDs
	queueFactory func(int) queue

	// FIXME: We don't strictly need to use a mutex for this if we seal the
	// channels on router start. This depends on whether we want to allow
	// dynamic channels in the future.
	channelMtx      sync.RWMutex
	channelQueues   map[ChannelID]queue // inbound messages from all peers to a single channel
	channelMessages map[ChannelID]proto.Message
}

// NewRouter creates a new Router. The given Transports must already be
// listening on appropriate interfaces, and will be closed by the Router when it
// stops.
func NewRouter(
	ctx context.Context,
	logger log.Logger,
	metrics *Metrics,
	nodeInfo types.NodeInfo,
	privKey crypto.PrivKey,
	peerManager *PeerManager,
	transports []Transport,
	endpoints []Endpoint,
	options RouterOptions,
) (*Router, error) {

	if err := options.Validate(); err != nil {
		return nil, err
	}

	router := &Router{
		logger:   logger,
		metrics:  metrics,
		nodeInfo: nodeInfo,
		privKey:  privKey,
		connTracker: newConnTracker(
			options.MaxIncomingConnectionAttempts,
			options.IncomingConnectionWindow,
		),
		chDescs:            make([]*ChannelDescriptor, 0),
		transports:         transports,
		endpoints:          endpoints,
		protocolTransports: map[Protocol]Transport{},
		peerManager:        peerManager,
		options:            options,
		channelQueues:      map[ChannelID]queue{},
		channelMessages:    map[ChannelID]proto.Message{},
		peerQueues:         map[types.NodeID]queue{},
		peerChannels:       make(map[types.NodeID]channelIDs),
	}

	router.BaseService = service.NewBaseService(logger, "router", router)

	qf, err := router.createQueueFactory(ctx)
	if err != nil {
		return nil, err
	}

	router.queueFactory = qf

	for _, transport := range transports {
		for _, protocol := range transport.Protocols() {
			if _, ok := router.protocolTransports[protocol]; !ok {
				router.protocolTransports[protocol] = transport
			}
		}
	}

	return router, nil
}

func (r *Router) createQueueFactory(ctx context.Context) (func(int) queue, error) {
	switch r.options.QueueType {
	case queueTypeFifo:
		return newFIFOQueue, nil

	case queueTypePriority:
		return func(size int) queue {
			if size%2 != 0 {
				size++
			}

			q := newPQScheduler(r.logger, r.metrics, r.chDescs, uint(size)/2, uint(size)/2, defaultCapacity)
			q.start(ctx)
			return q
		}, nil

	default:
		return nil, fmt.Errorf("cannot construct queue of type %q", r.options.QueueType)
	}
}

// ChannelCreator allows routers to construct their own channels,
// either by receiving a reference to Router.OpenChannel or using some
// kind shim for testing purposes.
type ChannelCreator func(context.Context, *ChannelDescriptor) (*Channel, error)

// OpenChannel opens a new channel for the given message type. The caller must
// close the channel when done, before stopping the Router. messageType is the
// type of message passed through the channel (used for unmarshaling), which can
// implement Wrapper to automatically (un)wrap multiple message types in a
// wrapper message. The caller may provide a size to make the channel buffered,
// which internally makes the inbound, outbound, and error channel buffered.
func (r *Router) OpenChannel(ctx context.Context, chDesc *ChannelDescriptor) (*Channel, error) {
	r.channelMtx.Lock()
	defer r.channelMtx.Unlock()

	id := chDesc.ID
	if _, ok := r.channelQueues[id]; ok {
		return nil, fmt.Errorf("channel %v already exists", id)
	}
	r.chDescs = append(r.chDescs, chDesc)

	messageType := chDesc.MessageType

	queue := r.queueFactory(chDesc.RecvBufferCapacity)
	outCh := make(chan Envelope, chDesc.RecvBufferCapacity)
	errCh := make(chan PeerError, chDesc.RecvBufferCapacity)
	channel := NewChannel(id, messageType, queue.dequeue(), outCh, errCh)

	var wrapper Wrapper
	if w, ok := messageType.(Wrapper); ok {
		wrapper = w
	}

	r.channelQueues[id] = queue
	r.channelMessages[id] = messageType

	// add the channel to the nodeInfo if it's not already there.
	r.nodeInfo.AddChannel(uint16(chDesc.ID))

	for _, t := range r.transports {
		t.AddChannelDescriptors([]*ChannelDescriptor{chDesc})
	}

	go func() {
		defer func() {
			r.channelMtx.Lock()
			delete(r.channelQueues, id)
			delete(r.channelMessages, id)
			r.channelMtx.Unlock()
			queue.close()
		}()

		r.routeChannel(ctx, id, outCh, errCh, wrapper)
	}()

	return channel, nil
}

// routeChannel receives outbound channel messages and routes them to the
// appropriate peer. It also receives peer errors and reports them to the peer
// manager. It returns when either the outbound channel or error channel is
// closed, or the Router is stopped. wrapper is an optional message wrapper
// for messages, see Wrapper for details.
func (r *Router) routeChannel(
	ctx context.Context,
	chID ChannelID,
	outCh <-chan Envelope,
	errCh <-chan PeerError,
	wrapper Wrapper,
) {
	for {
		select {
		case envelope, ok := <-outCh:
			if !ok {
				return
			}

			// Mark the envelope with the channel ID to allow sendPeer() to pass
			// it on to Transport.SendMessage().
			envelope.ChannelID = chID

			// wrap the message in a wrapper message, if requested
			if wrapper != nil {
				msg := proto.Clone(wrapper)
				if err := msg.(Wrapper).Wrap(envelope.Message); err != nil {
					r.logger.Error("failed to wrap message", "channel", chID, "err", err)
					continue
				}

				envelope.Message = msg
			}

			// collect peer queues to pass the message via
			var queues []queue
			if envelope.Broadcast {
				r.peerMtx.RLock()

				queues = make([]queue, 0, len(r.peerQueues))
				for nodeID, q := range r.peerQueues {
					peerChs := r.peerChannels[nodeID]

					// check whether the peer is receiving on that channel
					if _, ok := peerChs[chID]; ok {
						queues = append(queues, q)
					}
				}

				r.peerMtx.RUnlock()
			} else {
				r.peerMtx.RLock()

				q, ok := r.peerQueues[envelope.To]
				contains := false
				if ok {
					peerChs := r.peerChannels[envelope.To]

					// check whether the peer is receiving on that channel
					_, contains = peerChs[chID]
				}
				r.peerMtx.RUnlock()

				if !ok {
					r.logger.Debug("dropping message for unconnected peer", "peer", envelope.To, "channel", chID)
					continue
				}

				if !contains {
					// reactor tried to send a message across a channel that the
					// peer doesn't have available. This is a known issue due to
					// how peer subscriptions work:
					// https://github.com/tendermint/tendermint/issues/6598
					continue
				}

				queues = []queue{q}
			}

			// send message to peers
			for _, q := range queues {
				start := time.Now().UTC()

				select {
				case q.enqueue() <- envelope:
					r.metrics.RouterPeerQueueSend.Observe(time.Since(start).Seconds())

				case <-q.closed():
					r.logger.Debug("dropping message for unconnected peer", "peer", envelope.To, "channel", chID)

				case <-ctx.Done():
					return
				}
			}

		case peerError, ok := <-errCh:
			if !ok {
				return
			}

			r.logger.Error("peer error, evicting", "peer", peerError.NodeID, "err", peerError.Err)

			r.peerManager.Errored(peerError.NodeID, peerError.Err)
		case <-ctx.Done():
			return
		}
	}
}

func (r *Router) numConccurentDials() int {
	if r.options.NumConcurrentDials == nil {
		return runtime.NumCPU()
	}

	return r.options.NumConcurrentDials()
}

func (r *Router) filterPeersIP(ctx context.Context, ip net.IP, port uint16) error {
	if r.options.FilterPeerByIP == nil {
		return nil
	}

	return r.options.FilterPeerByIP(ctx, ip, port)
}

func (r *Router) filterPeersID(ctx context.Context, id types.NodeID) error {
	if r.options.FilterPeerByID == nil {
		return nil
	}

	return r.options.FilterPeerByID(ctx, id)
}

func (r *Router) dialSleep(ctx context.Context) {
	if r.options.DialSleep == nil {
		const (
			maxDialerInterval = 3000
			minDialerInterval = 250
		)

		// nolint:gosec // G404: Use of weak random number generator
		dur := time.Duration(rand.Int63n(maxDialerInterval-minDialerInterval+1) + minDialerInterval)

		timer := time.NewTimer(dur * time.Millisecond)
		defer timer.Stop()

		select {
		case <-ctx.Done():
		case <-timer.C:
		}

		return
	}

	r.options.DialSleep(ctx)
}

// acceptPeers accepts inbound connections from peers on the given transport,
// and spawns goroutines that route messages to/from them.
func (r *Router) acceptPeers(ctx context.Context, transport Transport) {
	for {
		conn, err := transport.Accept(ctx)
		switch err {
		case nil:
		case io.EOF:
			r.logger.Debug("stopping accept routine", "transport", transport)
			return
		default:
			r.logger.Error("failed to accept connection", "transport", transport, "err", err)
			return
		}

		incomingIP := conn.RemoteEndpoint().IP
		if err := r.connTracker.AddConn(incomingIP); err != nil {
			closeErr := conn.Close()
			r.logger.Debug("rate limiting incoming peer",
				"err", err,
				"ip", incomingIP.String(),
				"close_err", closeErr,
			)

			return
		}

		// Spawn a goroutine for the handshake, to avoid head-of-line blocking.
		go r.openConnection(ctx, conn)

	}
}

func (r *Router) openConnection(ctx context.Context, conn Connection) {
	defer conn.Close()
	defer r.connTracker.RemoveConn(conn.RemoteEndpoint().IP)

	re := conn.RemoteEndpoint()
	incomingIP := re.IP

	if err := r.filterPeersIP(ctx, incomingIP, re.Port); err != nil {
		r.logger.Debug("peer filtered by IP", "ip", incomingIP.String(), "err", err)
		return
	}

	// FIXME: The peer manager may reject the peer during Accepted()
	// after we've handshaked with the peer (to find out which peer it
	// is). However, because the handshake has no ack, the remote peer
	// will think the handshake was successful and start sending us
	// messages.
	//
	// This can cause problems in tests, where a disconnection can cause
	// the local node to immediately redial, while the remote node may
	// not have completed the disconnection yet and therefore reject the
	// reconnection attempt (since it thinks we're still connected from
	// before).
	//
	// The Router should do the handshake and have a final ack/fail
	// message to make sure both ends have accepted the connection, such
	// that it can be coordinated with the peer manager.
	peerInfo, err := r.handshakePeer(ctx, conn, "")
	switch {
	case errors.Is(err, context.Canceled):
		return
	case err != nil:
		r.logger.Error("peer handshake failed", "endpoint", conn, "err", err)
		return
	}
	if err := r.filterPeersID(ctx, peerInfo.NodeID); err != nil {
		r.logger.Debug("peer filtered by node ID", "node", peerInfo.NodeID, "err", err)
		return
	}

	if err := r.runWithPeerMutex(func() error { return r.peerManager.Accepted(peerInfo.NodeID) }); err != nil {
		r.logger.Error("failed to accept connection",
			"op", "incoming/accepted", "peer", peerInfo.NodeID, "err", err)
		return
	}

	r.routePeer(ctx, peerInfo.NodeID, conn, toChannelIDs(peerInfo.Channels))
}

// dialPeers maintains outbound connections to peers by dialing them.
func (r *Router) dialPeers(ctx context.Context) {
	addresses := make(chan NodeAddress)
	wg := &sync.WaitGroup{}

	// Start a limited number of goroutines to dial peers in
	// parallel. the goal is to avoid starting an unbounded number
	// of goroutines thereby spamming the network, but also being
	// able to add peers at a reasonable pace, though the number
	// is somewhat arbitrary. The action is further throttled by a
	// sleep after sending to the addresses channel.
	for i := 0; i < r.numConccurentDials(); i++ {
		wg.Add(1)
		go func() {
			defer wg.Done()

			for {
				select {
				case <-ctx.Done():
					return
				case address := <-addresses:
					r.connectPeer(ctx, address)
				}
			}
		}()
	}

LOOP:
	for {
		address, err := r.peerManager.DialNext(ctx)
		switch {
		case errors.Is(err, context.Canceled):
			break LOOP
		case err != nil:
			r.logger.Error("failed to find next peer to dial", "err", err)
			break LOOP
		}

		select {
		case addresses <- address:
			// this jitters the frequency that we call
			// DialNext and prevents us from attempting to
			// create connections too quickly.

			r.dialSleep(ctx)
			continue
		case <-ctx.Done():
			close(addresses)
			break LOOP
		}
	}

	wg.Wait()
}

func (r *Router) connectPeer(ctx context.Context, address NodeAddress) {
	conn, err := r.dialPeer(ctx, address)
	switch {
	case errors.Is(err, context.Canceled):
		return
	case err != nil:
		r.logger.Error("failed to dial peer", "peer", address, "err", err)
		if err = r.peerManager.DialFailed(ctx, address); err != nil {
			r.logger.Error("failed to report dial failure", "peer", address, "err", err)
		}
		return
	}

	peerInfo, err := r.handshakePeer(ctx, conn, address.NodeID)
	switch {
	case errors.Is(err, context.Canceled):
		conn.Close()
		return
	case err != nil:
		r.logger.Error("failed to handshake with peer", "peer", address, "err", err)
		if err = r.peerManager.DialFailed(ctx, address); err != nil {
			r.logger.Error("failed to report dial failure", "peer", address, "err", err)
		}
		conn.Close()
		return
	}

	if err := r.runWithPeerMutex(func() error { return r.peerManager.Dialed(address) }); err != nil {
		r.logger.Error("failed to dial peer",
			"op", "outgoing/dialing", "peer", address.NodeID, "err", err)
		conn.Close()
		return
	}

	// routePeer (also) calls connection close
	go r.routePeer(ctx, address.NodeID, conn, toChannelIDs(peerInfo.Channels))
}

func (r *Router) getOrMakeQueue(peerID types.NodeID, channels channelIDs) queue {
	r.peerMtx.Lock()
	defer r.peerMtx.Unlock()

	if peerQueue, ok := r.peerQueues[peerID]; ok {
		return peerQueue
	}

	peerQueue := r.queueFactory(queueBufferDefault)
	r.peerQueues[peerID] = peerQueue
	r.peerChannels[peerID] = channels
	return peerQueue
}

// dialPeer connects to a peer by dialing it.
func (r *Router) dialPeer(ctx context.Context, address NodeAddress) (Connection, error) {
	resolveCtx := ctx
	if r.options.ResolveTimeout > 0 {
		var cancel context.CancelFunc
		resolveCtx, cancel = context.WithTimeout(resolveCtx, r.options.ResolveTimeout)
		defer cancel()
	}

	r.logger.Debug("resolving peer address", "peer", address)
	endpoints, err := address.Resolve(resolveCtx)
	switch {
	case err != nil:
		return nil, fmt.Errorf("failed to resolve address %q: %w", address, err)
	case len(endpoints) == 0:
		return nil, fmt.Errorf("address %q did not resolve to any endpoints", address)
	}

	for _, endpoint := range endpoints {
		transport, ok := r.protocolTransports[endpoint.Protocol]
		if !ok {
			r.logger.Error("no transport found for protocol", "endpoint", endpoint)
			continue
		}

		dialCtx := ctx
		if r.options.DialTimeout > 0 {
			var cancel context.CancelFunc
			dialCtx, cancel = context.WithTimeout(dialCtx, r.options.DialTimeout)
			defer cancel()
		}

		// FIXME: When we dial and handshake the peer, we should pass it
		// appropriate address(es) it can use to dial us back. It can't use our
		// remote endpoint, since TCP uses different port numbers for outbound
		// connections than it does for inbound. Also, we may need to vary this
		// by the peer's endpoint, since e.g. a peer on 192.168.0.0 can reach us
		// on a private address on this endpoint, but a peer on the public
		// Internet can't and needs a different public address.
		conn, err := transport.Dial(dialCtx, endpoint)
		if err != nil {
			r.logger.Error("failed to dial endpoint", "peer", address.NodeID, "endpoint", endpoint, "err", err)
		} else {
			r.logger.Debug("dialed peer", "peer", address.NodeID, "endpoint", endpoint)
			return conn, nil
		}
	}
	return nil, errors.New("all endpoints failed")
}

// handshakePeer handshakes with a peer, validating the peer's information. If
// expectID is given, we check that the peer's info matches it.
func (r *Router) handshakePeer(
	ctx context.Context,
	conn Connection,
	expectID types.NodeID,
) (types.NodeInfo, error) {

	if r.options.HandshakeTimeout > 0 {
		var cancel context.CancelFunc
		ctx, cancel = context.WithTimeout(ctx, r.options.HandshakeTimeout)
		defer cancel()
	}

	peerInfo, peerKey, err := conn.Handshake(ctx, r.nodeInfo, r.privKey)
	if err != nil {
		return peerInfo, err
	}
	if err = peerInfo.Validate(); err != nil {
		return peerInfo, fmt.Errorf("invalid handshake NodeInfo: %w", err)
	}
	if types.NodeIDFromPubKey(peerKey) != peerInfo.NodeID {
		return peerInfo, fmt.Errorf("peer's public key did not match its node ID %q (expected %q)",
			peerInfo.NodeID, types.NodeIDFromPubKey(peerKey))
	}
	if expectID != "" && expectID != peerInfo.NodeID {
		return peerInfo, fmt.Errorf("expected to connect with peer %q, got %q",
			expectID, peerInfo.NodeID)
	}
	if err := r.nodeInfo.CompatibleWith(peerInfo); err != nil {
		return peerInfo, ErrRejected{
			err:            err,
			id:             peerInfo.ID(),
			isIncompatible: true,
		}
	}
	return peerInfo, nil
}

func (r *Router) runWithPeerMutex(fn func() error) error {
	r.peerMtx.Lock()
	defer r.peerMtx.Unlock()
	return fn()
}

// routePeer routes inbound and outbound messages between a peer and the reactor
// channels. It will close the given connection and send queue when done, or if
// they are closed elsewhere it will cause this method to shut down and return.
func (r *Router) routePeer(ctx context.Context, peerID types.NodeID, conn Connection, channels channelIDs) {
	r.metrics.Peers.Add(1)
	r.peerManager.Ready(ctx, peerID)

	sendQueue := r.getOrMakeQueue(peerID, channels)
	defer func() {
		r.peerMtx.Lock()
		delete(r.peerQueues, peerID)
		delete(r.peerChannels, peerID)
		r.peerMtx.Unlock()

		sendQueue.close()

		r.peerManager.Disconnected(ctx, peerID)
		r.metrics.Peers.Add(-1)
	}()

	r.logger.Info("peer connected", "peer", peerID, "endpoint", conn)

	errCh := make(chan error, 2)

	go func() {
		select {
		case errCh <- r.receivePeer(ctx, peerID, conn):
		case <-ctx.Done():
		}
	}()

	go func() {
		select {
		case errCh <- r.sendPeer(ctx, peerID, conn, sendQueue):
		case <-ctx.Done():
		}
	}()

	var err error
	select {
	case err = <-errCh:
	case <-ctx.Done():
	}

	_ = conn.Close()
	sendQueue.close()

	select {
	case <-ctx.Done():
	case e := <-errCh:
		// The first err was nil, so we update it with the second err, which may
		// or may not be nil.
		if err == nil {
			err = e
		}
	}

	// if the context was canceled
	if e := ctx.Err(); err == nil && e != nil {
		err = e
	}

	switch err {
	case nil, io.EOF:
		r.logger.Info("peer disconnected", "peer", peerID, "endpoint", conn)
	default:
		r.logger.Error("peer failure", "peer", peerID, "endpoint", conn, "err", err)
	}
}

// receivePeer receives inbound messages from a peer, deserializes them and
// passes them on to the appropriate channel.
func (r *Router) receivePeer(ctx context.Context, peerID types.NodeID, conn Connection) error {
	for {
		chID, bz, err := conn.ReceiveMessage(ctx)
		if err != nil {
			return err
		}

		r.channelMtx.RLock()
		queue, ok := r.channelQueues[chID]
		messageType := r.channelMessages[chID]
		r.channelMtx.RUnlock()

		if !ok {
			r.logger.Debug("dropping message for unknown channel", "peer", peerID, "channel", chID)
			continue
		}

		msg := proto.Clone(messageType)
		if err := proto.Unmarshal(bz, msg); err != nil {
			r.logger.Error("message decoding failed, dropping message", "peer", peerID, "err", err)
			continue
		}

		if wrapper, ok := msg.(Wrapper); ok {
			msg, err = wrapper.Unwrap()
			if err != nil {
				r.logger.Error("failed to unwrap message", "err", err)
				continue
			}
		}

		start := time.Now().UTC()

		select {
		case queue.enqueue() <- Envelope{From: peerID, Message: msg, ChannelID: chID}:
			r.metrics.PeerReceiveBytesTotal.With(
				"chID", fmt.Sprint(chID),
				"peer_id", string(peerID),
				"message_type", r.metrics.ValueToMetricLabel(msg)).Add(float64(proto.Size(msg)))
			r.metrics.RouterChannelQueueSend.Observe(time.Since(start).Seconds())
			r.logger.Debug("received message", "peer", peerID, "message", msg)

		case <-queue.closed():
			r.logger.Debug("channel closed, dropping message", "peer", peerID, "channel", chID)

		case <-ctx.Done():
			return nil
		}
	}
}

// sendPeer sends queued messages to a peer.
func (r *Router) sendPeer(ctx context.Context, peerID types.NodeID, conn Connection, peerQueue queue) error {
	for {
		start := time.Now().UTC()

		select {
		case envelope := <-peerQueue.dequeue():
			r.metrics.RouterPeerQueueRecv.Observe(time.Since(start).Seconds())
			if envelope.Message == nil {
				r.logger.Error("dropping nil message", "peer", peerID)
				continue
			}

			bz, err := proto.Marshal(envelope.Message)
			if err != nil {
				r.logger.Error("failed to marshal message", "peer", peerID, "err", err)
				continue
			}

			if err = conn.SendMessage(ctx, envelope.ChannelID, bz); err != nil {
				return err
			}

			r.logger.Debug("sent message", "peer", envelope.To, "message", envelope.Message)

		case <-peerQueue.closed():
			return nil

		case <-ctx.Done():
			return nil
		}
	}
}

// evictPeers evicts connected peers as requested by the peer manager.
func (r *Router) evictPeers(ctx context.Context) {
	for {
		peerID, err := r.peerManager.EvictNext(ctx)

		switch {
		case errors.Is(err, context.Canceled):
			return
		case err != nil:
			r.logger.Error("failed to find next peer to evict", "err", err)
			return
		}

		r.logger.Info("evicting peer", "peer", peerID)

		r.peerMtx.RLock()
		queue, ok := r.peerQueues[peerID]
		r.peerMtx.RUnlock()

		if ok {
			queue.close()
		}
	}
}

// NodeInfo returns a copy of the current NodeInfo. Used for testing.
func (r *Router) NodeInfo() types.NodeInfo {
	return r.nodeInfo.Copy()
}

// OnStart implements service.Service.
func (r *Router) OnStart(ctx context.Context) error {
	for _, transport := range r.transports {
		for _, endpoint := range r.endpoints {
			if err := transport.Listen(endpoint); err != nil {
				return err
			}
		}
	}

	r.logger.Info(
		"starting router",
		"node_id", r.nodeInfo.NodeID,
		"channels", r.nodeInfo.Channels,
		"listen_addr", r.nodeInfo.ListenAddr,
		"transports", len(r.transports),
	)

	go r.dialPeers(ctx)
	go r.evictPeers(ctx)

	for _, transport := range r.transports {
		go r.acceptPeers(ctx, transport)
	}

	return nil
}

// OnStop implements service.Service.
//
// All channels must be closed by OpenChannel() callers before stopping the
// router, to prevent blocked channel sends in reactors. Channels are not closed
// here, since that would cause any reactor senders to panic, so it is the
// sender's responsibility.
func (r *Router) OnStop() {
	// Close transport listeners (unblocks Accept calls).
	for _, transport := range r.transports {
		if err := transport.Close(); err != nil {
			r.logger.Error("failed to close transport", "transport", transport, "err", err)
		}
	}

	// Collect all remaining queues, and wait for them to close.
	queues := []queue{}

	r.channelMtx.RLock()
	for _, q := range r.channelQueues {
		queues = append(queues, q)
	}
	r.channelMtx.RUnlock()

	r.peerMtx.RLock()
	for _, q := range r.peerQueues {
		queues = append(queues, q)
	}
	r.peerMtx.RUnlock()

	for _, q := range queues {
		q.close()
		<-q.closed()
	}
}

type channelIDs map[ChannelID]struct{}

func toChannelIDs(bytes []byte) channelIDs {
	c := make(map[ChannelID]struct{}, len(bytes))
	for _, b := range bytes {
		c[ChannelID(b)] = struct{}{}
	}
	return c
}