You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

325 lines
8.4 KiB

new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
7 years ago
6 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
7 years ago
8 years ago
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
8 years ago
7 years ago
7 years ago
7 years ago
8 years ago
new pubsub package comment out failing consensus tests for now rewrite rpc httpclient to use new pubsub package import pubsub as tmpubsub, query as tmquery make event IDs constants EventKey -> EventTypeKey rename EventsPubsub to PubSub mempool does not use pubsub rename eventsSub to pubsub new subscribe API fix channel size issues and consensus tests bugs refactor rpc client add missing discardFromChan method add mutex rename pubsub to eventBus remove IsRunning from WSRPCConnection interface (not needed) add a comment in broadcastNewRoundStepsAndVotes rename registerEventCallbacks to broadcastNewRoundStepsAndVotes See https://dave.cheney.net/2014/03/19/channel-axioms stop eventBuses after reactor tests remove unnecessary Unsubscribe return subscribe helper function move discardFromChan to where it is used subscribe now returns an err this gives us ability to refuse to subscribe if pubsub is at its max capacity. use context for control overflow cache queries handle err when subscribing in replay_test rename testClientID to testSubscriber extract var set channel buffer capacity to 1 in replay_file fix byzantine_test unsubscribe from single event, not all events refactor httpclient to return events to appropriate channels return failing testReplayCrashBeforeWriteVote test fix TestValidatorSetChanges refactor code a bit fix testReplayCrashBeforeWriteVote add comment fix TestValidatorSetChanges fixes from Bucky's review update comment [ci skip] test TxEventBuffer update changelog fix TestValidatorSetChanges (2nd attempt) only do wg.Done when no errors benchmark event bus create pubsub server inside NewEventBus only expose config params (later if needed) set buffer capacity to 0 so we are not testing cache new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ} This should allow to subscribe to all transactions! or a specific one using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'" use TimeoutCommit instead of afterPublishEventNewBlockTimeout TimeoutCommit is the time a node waits after committing a block, before it goes into the next height. So it will finish everything from the last block, but then wait a bit. The idea is this gives it time to hear more votes from other validators, to strengthen the commit it includes in the next block. But it also gives it time to hear about new transactions. waitForBlockWithUpdatedVals rewrite WAL crash tests Task: test that we can recover from any WAL crash. Solution: the old tests were relying on event hub being run in the same thread (we were injecting the private validator's last signature). when considering a rewrite, we considered two possible solutions: write a "fuzzy" testing system where WAL is crashing upon receiving a new message, or inject failures and trigger them in tests using something like https://github.com/coreos/gofail. remove sleep no cs.Lock around wal.Save test different cases (empty block, non-empty block, ...) comments add comments test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks fixes as per Bucky's last review reset subscriptions on UnsubscribeAll use a simple counter to track message for which we panicked also, set a smaller part size for all test cases
8 years ago
  1. package consensus
  2. import (
  3. "bufio"
  4. "context"
  5. "fmt"
  6. "io"
  7. "os"
  8. "strconv"
  9. "strings"
  10. "github.com/pkg/errors"
  11. bc "github.com/tendermint/tendermint/blockchain"
  12. cfg "github.com/tendermint/tendermint/config"
  13. cmn "github.com/tendermint/tendermint/libs/common"
  14. dbm "github.com/tendermint/tendermint/libs/db"
  15. "github.com/tendermint/tendermint/libs/log"
  16. "github.com/tendermint/tendermint/proxy"
  17. sm "github.com/tendermint/tendermint/state"
  18. "github.com/tendermint/tendermint/types"
  19. )
  20. const (
  21. // event bus subscriber
  22. subscriber = "replay-file"
  23. )
  24. //--------------------------------------------------------
  25. // replay messages interactively or all at once
  26. // replay the wal file
  27. func RunReplayFile(config cfg.BaseConfig, csConfig *cfg.ConsensusConfig, console bool) {
  28. consensusState := newConsensusStateForReplay(config, csConfig)
  29. if err := consensusState.ReplayFile(csConfig.WalFile(), console); err != nil {
  30. cmn.Exit(fmt.Sprintf("Error during consensus replay: %v", err))
  31. }
  32. }
  33. // Replay msgs in file or start the console
  34. func (cs *ConsensusState) ReplayFile(file string, console bool) error {
  35. if cs.IsRunning() {
  36. return errors.New("cs is already running, cannot replay")
  37. }
  38. if cs.wal != nil {
  39. return errors.New("cs wal is open, cannot replay")
  40. }
  41. cs.startForReplay()
  42. // ensure all new step events are regenerated as expected
  43. ctx := context.Background()
  44. newStepSub, err := cs.eventBus.Subscribe(ctx, subscriber, types.EventQueryNewRoundStep)
  45. if err != nil {
  46. return errors.Errorf("failed to subscribe %s to %v", subscriber, types.EventQueryNewRoundStep)
  47. }
  48. defer cs.eventBus.Unsubscribe(ctx, subscriber, types.EventQueryNewRoundStep)
  49. // just open the file for reading, no need to use wal
  50. fp, err := os.OpenFile(file, os.O_RDONLY, 0600)
  51. if err != nil {
  52. return err
  53. }
  54. pb := newPlayback(file, fp, cs, cs.state.Copy())
  55. defer pb.fp.Close() // nolint: errcheck
  56. var nextN int // apply N msgs in a row
  57. var msg *TimedWALMessage
  58. for {
  59. if nextN == 0 && console {
  60. nextN = pb.replayConsoleLoop()
  61. }
  62. msg, err = pb.dec.Decode()
  63. if err == io.EOF {
  64. return nil
  65. } else if err != nil {
  66. return err
  67. }
  68. if err := pb.cs.readReplayMessage(msg, newStepSub); err != nil {
  69. return err
  70. }
  71. if nextN > 0 {
  72. nextN--
  73. }
  74. pb.count++
  75. }
  76. return nil
  77. }
  78. //------------------------------------------------
  79. // playback manager
  80. type playback struct {
  81. cs *ConsensusState
  82. fp *os.File
  83. dec *WALDecoder
  84. count int // how many lines/msgs into the file are we
  85. // replays can be reset to beginning
  86. fileName string // so we can close/reopen the file
  87. genesisState sm.State // so the replay session knows where to restart from
  88. }
  89. func newPlayback(fileName string, fp *os.File, cs *ConsensusState, genState sm.State) *playback {
  90. return &playback{
  91. cs: cs,
  92. fp: fp,
  93. fileName: fileName,
  94. genesisState: genState,
  95. dec: NewWALDecoder(fp),
  96. }
  97. }
  98. // go back count steps by resetting the state and running (pb.count - count) steps
  99. func (pb *playback) replayReset(count int, newStepSub types.Subscription) error {
  100. pb.cs.Stop()
  101. pb.cs.Wait()
  102. newCS := NewConsensusState(pb.cs.config, pb.genesisState.Copy(), pb.cs.blockExec,
  103. pb.cs.blockStore, pb.cs.txNotifier, pb.cs.evpool)
  104. newCS.SetEventBus(pb.cs.eventBus)
  105. newCS.startForReplay()
  106. if err := pb.fp.Close(); err != nil {
  107. return err
  108. }
  109. fp, err := os.OpenFile(pb.fileName, os.O_RDONLY, 0600)
  110. if err != nil {
  111. return err
  112. }
  113. pb.fp = fp
  114. pb.dec = NewWALDecoder(fp)
  115. count = pb.count - count
  116. fmt.Printf("Reseting from %d to %d\n", pb.count, count)
  117. pb.count = 0
  118. pb.cs = newCS
  119. var msg *TimedWALMessage
  120. for i := 0; i < count; i++ {
  121. msg, err = pb.dec.Decode()
  122. if err == io.EOF {
  123. return nil
  124. } else if err != nil {
  125. return err
  126. }
  127. if err := pb.cs.readReplayMessage(msg, newStepSub); err != nil {
  128. return err
  129. }
  130. pb.count++
  131. }
  132. return nil
  133. }
  134. func (cs *ConsensusState) startForReplay() {
  135. cs.Logger.Error("Replay commands are disabled until someone updates them and writes tests")
  136. /* TODO:!
  137. // since we replay tocks we just ignore ticks
  138. go func() {
  139. for {
  140. select {
  141. case <-cs.tickChan:
  142. case <-cs.Quit:
  143. return
  144. }
  145. }
  146. }()*/
  147. }
  148. // console function for parsing input and running commands
  149. func (pb *playback) replayConsoleLoop() int {
  150. for {
  151. fmt.Printf("> ")
  152. bufReader := bufio.NewReader(os.Stdin)
  153. line, more, err := bufReader.ReadLine()
  154. if more {
  155. cmn.Exit("input is too long")
  156. } else if err != nil {
  157. cmn.Exit(err.Error())
  158. }
  159. tokens := strings.Split(string(line), " ")
  160. if len(tokens) == 0 {
  161. continue
  162. }
  163. switch tokens[0] {
  164. case "next":
  165. // "next" -> replay next message
  166. // "next N" -> replay next N messages
  167. if len(tokens) == 1 {
  168. return 0
  169. }
  170. i, err := strconv.Atoi(tokens[1])
  171. if err != nil {
  172. fmt.Println("next takes an integer argument")
  173. } else {
  174. return i
  175. }
  176. case "back":
  177. // "back" -> go back one message
  178. // "back N" -> go back N messages
  179. // NOTE: "back" is not supported in the state machine design,
  180. // so we restart and replay up to
  181. ctx := context.Background()
  182. // ensure all new step events are regenerated as expected
  183. newStepSub, err := pb.cs.eventBus.Subscribe(ctx, subscriber, types.EventQueryNewRoundStep)
  184. if err != nil {
  185. cmn.Exit(fmt.Sprintf("failed to subscribe %s to %v", subscriber, types.EventQueryNewRoundStep))
  186. }
  187. defer pb.cs.eventBus.Unsubscribe(ctx, subscriber, types.EventQueryNewRoundStep)
  188. if len(tokens) == 1 {
  189. if err := pb.replayReset(1, newStepSub); err != nil {
  190. pb.cs.Logger.Error("Replay reset error", "err", err)
  191. }
  192. } else {
  193. i, err := strconv.Atoi(tokens[1])
  194. if err != nil {
  195. fmt.Println("back takes an integer argument")
  196. } else if i > pb.count {
  197. fmt.Printf("argument to back must not be larger than the current count (%d)\n", pb.count)
  198. } else {
  199. if err := pb.replayReset(i, newStepSub); err != nil {
  200. pb.cs.Logger.Error("Replay reset error", "err", err)
  201. }
  202. }
  203. }
  204. case "rs":
  205. // "rs" -> print entire round state
  206. // "rs short" -> print height/round/step
  207. // "rs <field>" -> print another field of the round state
  208. rs := pb.cs.RoundState
  209. if len(tokens) == 1 {
  210. fmt.Println(rs)
  211. } else {
  212. switch tokens[1] {
  213. case "short":
  214. fmt.Printf("%v/%v/%v\n", rs.Height, rs.Round, rs.Step)
  215. case "validators":
  216. fmt.Println(rs.Validators)
  217. case "proposal":
  218. fmt.Println(rs.Proposal)
  219. case "proposal_block":
  220. fmt.Printf("%v %v\n", rs.ProposalBlockParts.StringShort(), rs.ProposalBlock.StringShort())
  221. case "locked_round":
  222. fmt.Println(rs.LockedRound)
  223. case "locked_block":
  224. fmt.Printf("%v %v\n", rs.LockedBlockParts.StringShort(), rs.LockedBlock.StringShort())
  225. case "votes":
  226. fmt.Println(rs.Votes.StringIndented(" "))
  227. default:
  228. fmt.Println("Unknown option", tokens[1])
  229. }
  230. }
  231. case "n":
  232. fmt.Println(pb.count)
  233. }
  234. }
  235. return 0
  236. }
  237. //--------------------------------------------------------------------------------
  238. // convenience for replay mode
  239. func newConsensusStateForReplay(config cfg.BaseConfig, csConfig *cfg.ConsensusConfig) *ConsensusState {
  240. dbType := dbm.DBBackendType(config.DBBackend)
  241. // Get BlockStore
  242. blockStoreDB := dbm.NewDB("blockstore", dbType, config.DBDir())
  243. blockStore := bc.NewBlockStore(blockStoreDB)
  244. // Get State
  245. stateDB := dbm.NewDB("state", dbType, config.DBDir())
  246. gdoc, err := sm.MakeGenesisDocFromFile(config.GenesisFile())
  247. if err != nil {
  248. cmn.Exit(err.Error())
  249. }
  250. state, err := sm.MakeGenesisState(gdoc)
  251. if err != nil {
  252. cmn.Exit(err.Error())
  253. }
  254. // Create proxyAppConn connection (consensus, mempool, query)
  255. clientCreator := proxy.DefaultClientCreator(config.ProxyApp, config.ABCI, config.DBDir())
  256. proxyApp := proxy.NewAppConns(clientCreator)
  257. err = proxyApp.Start()
  258. if err != nil {
  259. cmn.Exit(fmt.Sprintf("Error starting proxy app conns: %v", err))
  260. }
  261. eventBus := types.NewEventBus()
  262. if err := eventBus.Start(); err != nil {
  263. cmn.Exit(fmt.Sprintf("Failed to start event bus: %v", err))
  264. }
  265. handshaker := NewHandshaker(stateDB, state, blockStore, gdoc)
  266. handshaker.SetEventBus(eventBus)
  267. err = handshaker.Handshake(proxyApp)
  268. if err != nil {
  269. cmn.Exit(fmt.Sprintf("Error on handshake: %v", err))
  270. }
  271. mempool, evpool := sm.MockMempool{}, sm.MockEvidencePool{}
  272. blockExec := sm.NewBlockExecutor(stateDB, log.TestingLogger(), proxyApp.Consensus(), mempool, evpool)
  273. consensusState := NewConsensusState(csConfig, state.Copy(), blockExec,
  274. blockStore, mempool, evpool)
  275. consensusState.SetEventBus(eventBus)
  276. return consensusState
  277. }