You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

106 lines
2.7 KiB

privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
privval: refactor Remote signers (#3370) This PR is related to #3107 and a continuation of #3351 It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction. Given two hosts A and B: Host A is listener/client Host B is dialer/server (contains the secret key) When A requires a signature, it needs to wait for B to dial in before it can issue a request. A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect. The original rationale behind this design was based on security. Host B only allows outbound connections to a list of whitelisted hosts. It is not possible to reach B unless B dials in. There are no listening/open ports in B. This PR results in the following changes: Refactors ping/heartbeat to avoid previously existing race conditions. Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow. Unifies and abstracts away the differences between unix and tcp sockets. A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj) The signer request handler (server side) is customizable to increase testability. Updates and extends unit tests A high level overview of the classes is as follows: Transport (endpoints): The following classes take care of establishing a connection SignerDialerEndpoint SignerListeningEndpoint SignerEndpoint groups common functionality (read/write/timeouts/etc.) Signing (client/server): The following classes take care of exchanging request/responses SignerClient SignerServer This PR also closes #3601 Commits: * refactoring - work in progress * reworking unit tests * Encapsulating and fixing unit tests * Improve tests * Clean up * Fix/improve unit tests * clean up tests * Improving service endpoint * fixing unit test * fix linter issues * avoid invalid cache values (improve later?) * complete implementation * wip * improved connection loop * Improve reconnections + fixing unit tests * addressing comments * small formatting changes * clean up * Update node/node.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * check during initialization * dropping connecting when writing fails * removing break * use t.log instead * unifying and using cmn.GetFreePort() * review fixes * reordering and unifying drop connection * closing instead of signalling * refactored service loop * removed superfluous brackets * GetPubKey can return errors * Revert "GetPubKey can return errors" This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c. * adding entry to changelog * Update CHANGELOG_PENDING.md Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_client.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_dialer_endpoint.go Co-Authored-By: jleni <juan.leni@zondax.ch> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: jleni <juan.leni@zondax.ch> * updating node.go * review fixes * fixes linter * fixing unit test * small fixes in comments * addressing review comments * addressing review comments 2 * reverting suggestion * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_client_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * Update privval/signer_listener_endpoint_test.go Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com> * do not expose brokenSignerDialerEndpoint * clean up logging * unifying methods shorten test time signer also drops * reenabling pings * improving testability + unit test * fixing go fmt + unit test * remove unused code * Addressing review comments * simplifying connection workflow * fix linter/go import issue * using base service quit * updating comment * Simplifying design + adjusting names * fixing linter issues * refactoring test harness + fixes * Addressing review comments * cleaning up * adding additional error check
5 years ago
  1. package privval
  2. import (
  3. "context"
  4. "io"
  5. "sync"
  6. "github.com/tendermint/tendermint/libs/service"
  7. privvalproto "github.com/tendermint/tendermint/proto/tendermint/privval"
  8. "github.com/tendermint/tendermint/types"
  9. )
  10. // ValidationRequestHandlerFunc handles different remoteSigner requests
  11. type ValidationRequestHandlerFunc func(
  12. ctx context.Context,
  13. privVal types.PrivValidator,
  14. requestMessage privvalproto.Message,
  15. chainID string) (privvalproto.Message, error)
  16. type SignerServer struct {
  17. service.BaseService
  18. endpoint *SignerDialerEndpoint
  19. chainID string
  20. privVal types.PrivValidator
  21. handlerMtx sync.Mutex
  22. validationRequestHandler ValidationRequestHandlerFunc
  23. }
  24. func NewSignerServer(endpoint *SignerDialerEndpoint, chainID string, privVal types.PrivValidator) *SignerServer {
  25. ss := &SignerServer{
  26. endpoint: endpoint,
  27. chainID: chainID,
  28. privVal: privVal,
  29. validationRequestHandler: DefaultValidationRequestHandler,
  30. }
  31. ss.BaseService = *service.NewBaseService(endpoint.logger, "SignerServer", ss)
  32. return ss
  33. }
  34. // OnStart implements service.Service.
  35. func (ss *SignerServer) OnStart(ctx context.Context) error {
  36. go ss.serviceLoop(ctx)
  37. return nil
  38. }
  39. // OnStop implements service.Service.
  40. func (ss *SignerServer) OnStop() {
  41. ss.endpoint.logger.Debug("SignerServer: OnStop calling Close")
  42. _ = ss.endpoint.Close()
  43. }
  44. // SetRequestHandler override the default function that is used to service requests
  45. func (ss *SignerServer) SetRequestHandler(validationRequestHandler ValidationRequestHandlerFunc) {
  46. ss.handlerMtx.Lock()
  47. defer ss.handlerMtx.Unlock()
  48. ss.validationRequestHandler = validationRequestHandler
  49. }
  50. func (ss *SignerServer) servicePendingRequest(ctx context.Context) {
  51. if !ss.IsRunning() {
  52. return // Ignore error from closing.
  53. }
  54. req, err := ss.endpoint.ReadMessage()
  55. if err != nil {
  56. if err != io.EOF {
  57. ss.endpoint.logger.Error("SignerServer: HandleMessage", "err", err)
  58. }
  59. return
  60. }
  61. var res privvalproto.Message
  62. {
  63. // limit the scope of the lock
  64. ss.handlerMtx.Lock()
  65. defer ss.handlerMtx.Unlock()
  66. res, err = ss.validationRequestHandler(ctx, ss.privVal, req, ss.chainID) // todo
  67. if err != nil {
  68. // only log the error; we'll reply with an error in res
  69. ss.endpoint.logger.Error("SignerServer: handleMessage", "err", err)
  70. }
  71. }
  72. err = ss.endpoint.WriteMessage(res)
  73. if err != nil {
  74. ss.endpoint.logger.Error("SignerServer: writeMessage", "err", err)
  75. }
  76. }
  77. func (ss *SignerServer) serviceLoop(ctx context.Context) {
  78. for {
  79. select {
  80. case <-ctx.Done():
  81. return
  82. default:
  83. if err := ss.endpoint.ensureConnection(ctx); err != nil {
  84. return
  85. }
  86. ss.servicePendingRequest(ctx)
  87. }
  88. }
  89. }